ReviewsUniversal Angle Ruler

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

Neoteck Digital Angle Finder Ruler 8 inch/200mm Stainless Steel Digital Protractor with Data Hold Function and Zeroing Resetting LCD Display Electronic Spirit Level Gauge Ruler

  • 【Stainless Steel Angle Finder Ruler】 Digital LCD display for Easy Reading.
  • High Accuracy ±0.3°, Resolution 0.05°.
  • 【Data Hold Function】Pressing HOLD Button to Hold the Angles Values in Any Times, Operate Conveniently.
  • 【ON/OFF/ZERO Button】Short Press: Turn on/ Zeroing Resetting at Any Angle.
  • 【Multi-functional Design】 Combined with Stainless Steel Ruler and Angle Sensor, Measuring Angle and Length.
  • Hinge Mechanism on the Angle Ruler Allows Full 360-degrees to Measure Inside and Outside.
  • 【Smart Angle Finder Ruler】Come with a 3V CR2032 Battery, Automatically Shut Down after 6 Minutes of Inactivity.
Check Stock

Generic Digital Angle Finder Construction Protractor 4 in 1 Angle Ruler Carpenter

  • Measure angle, horizontal, vertical, plane universal and straight line, multi-purpose use..
  • Work very well for woodworking and transferring angles, it can be lockedat any angle..
  • Made of high quality engineering material, durable and long service life, for practical use..
  • Digital display, LCD display, easy to read, quick and clear digital readout..
  • 4 in 1 function, ruler and protractor combination for measuring inside and outside angles, makes measurements and convenience..
Check Stock

YEESHYBON Multi-Angle Measuring Ruler,12-Side Aluminum Alloy Universal Angle Measuring Tool, Tile Tool, Angle Finder Template Tool for Builders, Craftsmen, Carpenters

  • DURABLE ALUMINUM ALLOY METAL MATERIAL: This multi-angle measuring ruler is premium aluminum that won’t rust, break, and last longer. It is more durable and stronger than a plastic ruler..
  • UPGRADED POSITIONING HOLE TEMPLATE: Our multi-angle measuring ruler is equipped with a positioning device for plastic tile tool openings in five diameter sizes of 0.98 in / 1.57 in / 1.77 in / 2.16 in / 2.95 in. Place the template tool on your work area, slide the ruler to your desired shape, and then tighten the screws. Help you create standard round holes in your project quickly!.
  • LASER ENGRAVED SCALE: This measuring ruler has laser engraving marks (inches and centimeters), high precision, high definition, no paint drop, and is more wear-resistant. It is an ideal gift for engineers, Carpentry, Bricklayer, and Craftsmen..
  • EASY TO USE & INCREASE EFFICIENT: This ruler has 12 sides and has a more extensive range of use, which is more powerful than ordinary six sides rulers. This ruler can be folded and disassembled, and the number of rulers can be used according to different situations. Very efficient measurement drawing positioning tool!.
  • WIDE RANGE OF APPLICATIONS: Multi-angle measuring ruler is suitable for all kinds of work, woodworking, floor, ceramic tile, glass i....
Check Stock

VOLCANOES CLUB 3 in 1 Digital Angle Finder Protractor - Angle Gauge Spirit Level Ruler with INCH/MM & Level Bubble Vials - Measuring Super Gauge Tool - Decoration, Construction, Woodworking, Machinery

  • ...gher resolution of 0.05°and higher accuracy of ±0.1°. It can quickly and accurately calculate the angle. By adding three vials (Horizontal level/ Vertical level/ Circular level), it can be used Like a spirit level and achieve multiple measurements, such as horizontal measurement、vertical measurement as well as universal measurement . (It will not display numbers on the screen, and just help you to judge whether it is a level or not.).
  • FUNCTIONS AND FEATURES: ‘HOLD BUTTON’ can keep the measurement result at any angle, so as to transfer the measurement result to read and record. ‘LOCKING KNOB’ also can fix the angle shape, so as to transfer the angle and draw it on the paper. (The purpose of the locking knob is to adjust the tightness, not to lock the measurement.) ‘AUTOMATIC TURN OFF’ after 5 minutes without any operation or movement to extend the battery life. ‘HANGING HOLE’ is easy to store and carry..
  • MATERIAL: Our angle ruler is made of special hard plastic. Compared with aluminum and stainless steel, it is more lighter and its edges are smooth and not sharp, making it safer and more durable. At the same time, the full LCD screen and the scale on the ruler is clearer and easier to read..
  • WIDE APPLICATION: It is designed for Const....
Check Stock

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

  • VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
  • TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
  • DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
  • ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check Stock

Frylr Metric A3 Drawing Board Drafting Table with Parallel Motion and Angle Metric Measuring System 20” X 14.5”

  • DRAFTING INSTRUMENT KIT: Only Metric Measurement Made of high quality acrylic, lightweight and durable. Ergonomic designed A3 drawing board set. Size: 50.2cm x 36.8cm x 6cm/20'' x 14.5'' x 2.4''.
  • DETACHABLE 3 RULERS: T-Sliding Ruler/Triangle/L-Shape Ruler, T-shaped ruler can be locked on both sides of the board, sliding up and down.12cm L-Shape rotating ruler and 12cm triangle with angle attachment slide in a groove on the T-Sliding Ruler..
  • PAPER LOCATOR AND TILT ANGLE CCLAMPS: There are paper fixed splint on both sides to make the drawing process more accurate and stable. You can also use the anti slip support clamps to find a comfortable drawing angle..
  • PROFESSIONAL DRAWING TOOLS: An indispensable drafting board tool for engineers, designers and engineering students, and also a perfect gift to your friends..
  • PACKAGE LIST: 1x Triangle Ruler, 1x Protractor, 1x Sliding Ruler, 2x Clamps, 1x Drawing Pencil and Lead Core, all parts in picture included!.
Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

Suncala Digital Angle Finder Protractor with Zeroing and Locking Function, 7-Inch Stainless Steel Angle Finder Ruler

  • * QUICK AND ACCURATE READING - Digital LCD display for easy reading.
  • * MULTI-FUNCTIONAL MEASUREMENT - 2-in-1 device to measure both length and angle, metric and Imperial Scale.
  • * RESETTING & LOCKING - The ruler could be hold at any angles using the lock/open knob to adjust the tightness..
  • * DURABLE AND SIMPLE ON/OFF - Ruler made of stainless steel for durability, Could be well used into various fields besides of Angle ruler, Straight ruler and Square Ruler..
  • Can work more than 2000 hours with one piece of CR2032 coin battery(Included).
Check Stock

TWOZOZO Woodworking Edge Ruler, Precision Woodworking Tools Ruler with Adjustable Protractor Angle Finder, Stainless Steel Carpenter Mark Rule（20 Inch）

  • MULTI-ANGLE USE : Our woodworking measuring tools come with a protractor to measure both length and angle. The woodworker adjusts the angle from 0° to 70° according to the use, and draws the line in the desired position precisely. The ruler is simple and easy to operate, a good helper for you.
  • CLEAR AND LEGIBLE SCALES: T square ruler is laser precision engraved. It has permanent dark markings and white scales for maximum readability in any light.
  • DURABLE MATERIALS: The dial of the woodworking edge ruler is made of plastic ABS, and the goniometer and body are made of stainless steel, which is resistant to moisture, rust and corrosion. The measuring tape is perfect for carpenters, designers, architects, mechanics, engineers, etc.
  • EASY TO HANDLE: You can put the cross side of the disc close to the edge of the board and turn the ruler to get the angle you want, draw a straight or diagonal line. The pencil tip is placed in the notch of the serrated groove and moved along the board to facilitate your measurement.
  • WOODWORKING RULER PLACEMENT: The carpenter's ruler comes with a wall....
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock