ReviewsUniversal Crowfoot Couplings

Campbell Fittings UF-3 Cast Ductile Iron Hose Fitting, Universal Coupler, 3/4\ NPT Female

  • Mate with domestic and imported universal couplings.
  • Washers manufactured from nitrile for superior oil resistance.
  • Cast ductile iron meets ASTM A536 specification.
Check Stock

Rigid Shaft Coupling,Clamp,3-1/4\ L

  • Shaft Couplings, Collars, and Universal Joints.
Check Stock

VCT 10 Pc 3/8' Drive Fully Polished Metric Flare Nut Crowfoot Wrench Set

  • 3/8 in. Drive Crowfoot Flare Nut Wrench Set includes 10 pieces of all sizes between 10mm and 22mm--the most common sizes used for automotive repair. Each wrench is made with drop forged alloy steel and designed with an open side and a 15-degree offset at each end. This set comes mounted on a storage rail for convenient transport and storage..
  • Includes 10 Crowfoot Flare Nut Wrenches from 10, 11, 13, 14, 15, 16, 17, 18, 19, 22mm.
  • Open side at each end allows for easy access over lines and tubing while still providing 5 sides for a maximum on fasteners.
  • 15-degree offset provides clearance for your fingers and other obstructions near the fastener.
  • Drop forged alloy steel material provides strength and comfort.
Check Stock

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines..
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance..
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire..
  • Warranty: We offer 30 days and 365 days free replacement warranty..
Check Stock

xiixtoo 36 Volt 20 AMP Replacement Battery Charger for 36 Volt Club Car, EZGO & Yamaha Golf Carts with Crowfoot Plug

  • 36 VOLT 20 AMP GOLF CART BATTERY CHARGER WITH CROWFOOT PLUG- Charges 36 volt Club Car, EZGO & Yamaha golf carts with the “crowfoot” style plug..
  • Input Voltage: AC 90-130V, Output: DC 36V 20Amps..
  • LIGHTWEIGHT & PORTABLE - The charger weighs in at only 5.9 lbs and is more than 66% lighter than OEM golf cart battery chargers. Whether you are in the garage, parked in front of the clubhouse or at the cart shed, the light weight charger can easily be taken with you..
  • Featuring on the charging status are 2 LED lights. Operating on standard 110V household power..
  • Fully Automatic Battery Charger, forget 3-stage smart charging, completes the charge cycle and goes to "float charge.
Check Stock

Universal Low Voltage Installation Kit 3 80 ft of Pipe

  • Includes All Materials Necessary to Install a Central Vacuum System.
  • Universal Kit Can Be Used with Almost All Central Vacuum Makes and Models.
  • Kit includes (9) sweep 90’s, (3) sweep tee’s, (3) short 90’s, (6) 45’s, (6) pipe straps, (11) couplings, (3) mounting brackets, (1) glue, (15) cable ties, (3) round door inlets, 80’ of pipe (5’ sections), 80’ of wire, and an installation manual..
Check Stock

Drip Irrigation Kit, Garden Irrigation System, 156Pcs Automatic Garden Watering System with Adjustable Dripper 82ft 1/4\ Blank Distribution Drip Irrigation tubing, Garden, Flower Bed,Patio,Lawn

  • include : 100pcs ❤ Rich Accessories: 1* 98FT 1/4'' Tubing.
  • 2* 1/2‘’&3/4'’ Threaded Faucet Connector.
  • ❤ Three Irrigation Methods: ①Atomized irrigation, can be hung, and can be cooled.
  • ②Adjustable dripper, eight-hole water outlet, working pressure: 0.5-3Bar, wetting radius: 20cm.
  • ③Pressure compensation dripper, anti-inverted siphon, improve anti Blocking performance, constant flow during long-distance laying or pressure fluctuations, high irrigation uniformity, regular irrigation, 2 liters per hour..
  • include : 100pcs ❤ Save Water and Money: The irrigation system can automatically water after turning on the tap, which can save up to 70% of water compared to manual watering. The precision sprinkler system can slowly and accurately deliver the right amount of water to the root area where the plants need it..
  • ❤ Wide Range of Application: Irrigation kit simple installation, no need to excavate or excavate pipeline technol....
Check Stock

Tb Woods 5J12 Coupling

  • Item - Sleeve Coupling Flanges: Sleeve Coupling Flange.
Check Stock

Powerbuilt 2 Piece Spring-Loaded Crowfoot Wrench Set, Adjustable, Auto Size, Universal, Self-Adjusting, Power Grip , Rapid Wrench- 240274

  • HANDY ADDITION: the 2- Piece Spring Crowfoot Wrench Set can do the work of multiple wrenches, leaving more space in your toolbag and speeding up your job by eliminating the search for those single sized wrenches.
  • WORK FASTER: The innovative crowfoot wrenches are spring loaded and auto adjusting to the size of the fastener.
  • the jaws ratchet back between turns eliminating the need to remove and replace the wrench when tightening or loosening fasteners.
  • REPLACES SEVERAL WRENCHES: This 2 piece set in 3/8 inch and 1/2 inch in combination have a wide usable working range.
  • 3/8 inch drive wrench jaw range is 5/16 inch to 11/16 inch.
  • 1/2 inch drive wrench jaw range is 9/16 inch to 1 1/4 inch.
  • MULTIPLE DRIVE OPTIONS: The wrench set has both male and female square drive options.
  • use a breaker bar, ratchet, or bar extension.
  • BUILT TOUGH: Made of tough Chrome Vanadium Steel for a lifetime of use.
Check Stock

NEIKO 03325A ½” Drive Jumbo Crowfoot Wrench Set | 14 Piece | SAE | 1-1/16” to 2” | Cr-Mo Steel

  • [PRO QUALITY]: This professional grade set includes 14 high quality 1/2 inch jumbo crowfoot flare nut wrenches ranging in size from 1-1/16” to 2” for all your home and automotive jobs..
  • [DURABLE]: This wrench set is made of durable, industrial grade, heat-treated, drop forged chrome molybdenum alloy steel that won’t easily break nor rust to promote long-lasting service life..
  • [VERSATILE]: These open-end sockets are ideal for diesel and automotive maintenance in any car or truck garage and can be used with any 1/2" drive ratchet, extension or torque wrench to reach tight, narrow spaces or deep recesses where 6- and 12-point sockets just won’t fit..
  • [INCLUDES]: 14 jumbo sizes for 1/2" drive crowfoot wrenches ranging in size including 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1- 1/2", 1-5/8", 1-11/16", 1-3/4", 1-13/16", 1-7/8", and 2”..
  • [CONVENIENCE]: Includes a hard plastic blow-molded case for convenient storage and organization along with clearly marked identification on each wrench..
Check Stock

OEMTOOLS 27178 Master Inner Tie Rod Tool Set Remove & Install Tie Rods in Cars Pickups and SUVs Includes 12 Crowfoot Adapters & 1/2 Inch Drive Tube

  • INNER TIE ROD REMOVAL TOOL SET: This tie rod kit Includes 12 sizes of crowfoot-style adapters: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2" and....
  • ULTRA DURABLE: Tie rod puller tool's crowfoot adapters are nickel plated for durability.
  • Work the inner tie rod tool kit on your tierod end with the....
  • WIDELY USEFUL INNER TIE ROD TOOL: Be sure you have an inner tie rod kit that can easily reach your inner tie rod without removing the rack and pinion.
  • USE A RATCHET OR BREAKER BAR: Properly torque the inner tie rod remover on the tie rod end without hassle.
  • Tie rod end puller's 1/2 Inch drive tube....
  • EFFORTLESS ORGANIZATION: OEM Tools inner tie rod tool can be taken anywhere easily.
  • Tie rod end removal tool comes in a blow mold case for easy....
Check Stock