ReviewsUniversal Four in one Removal Tool

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

Toolwiz Universal Inner Tie Rod Hex Wrench Repair Removal Tools 27-42mm for Car Truck Vehicle Motorcycle, Inner Tie Rod Removal Tool Compatible with Mercedes Benz, BMW, Toyota, Honda, Ford

  • Toolwiz inner tierod removal tool is designed specifically for the removal of the direction of the steering rod.
  • This inner tie rod remover is suitable for tie rods between 27mm and 42mm in diameter.
  • Inner Tire Rod Removal Tool: Easily removes inner tie rod ends without removing rack and pinion.
  • This inner tie rod tool is specially designed to be used with 1/2" square drive tools.
  • Inner tie rod tool removal is universal fits for various vehicles, compatible with Mercedes, Benz, BMW, Toyota, Honda, and more.
Check Stock

12 Pcs Cache Aerator, 5 Sizes Faucet Aerator Key Removal Wrench, Replacement Cache Aerator for Sink M16.5 18.5 21.5 24 mm Tap Aerators Flow Restrictor

  • ...to install】Sink aerator set with water keys comes with wrench tools allow you to complete removal and installation in minutes. No need to have a plumber. Faucet aerator removal tool is easy for your daily use. Faucet flow restrictor replacement parts is suitable for insert sink aerator for bathroom or kitchen..
  • 【Universal Faucet Bubbler Wrench】12 Pcs aerator key and removal tool can be fitted to kitchen sink faucets, bathroom taps and lavatory faucets spout head, suitable for Neoperl, Moen, Kohler, American Standard, Danze, and Groche Cache Aerators..
Check Stock

OEMTOOLS 20561 20-Inch Universal Heavy Duty Lug Nut Wrench 4-Way Cross Wrench SAE & Metric Lug Wrench Classic Cross Welded Design for Torque Green

  • UNIVERSAL APPLICATIONS: Tire changer comes in four (4) socket sizes.
  • Will fit SAE and Metric lug nuts that are standard on most passenger vehicles:....
  • INCREASED LEVERAGE: 20” tire iron lug wrench provides more leverage than standard 14” universal lug wrenches, which makes this lug nut removal....
  • WILL NOT ROUND LUG NUT EDGES: 6-Point sockets grip the flats of lug bolts, eliminating rounded corners.
  • Especially useful for older wheel lug nuts.
  • OPTIMAL EFFICIENCY: Welded cross design allows for this 4 way tire iron to be used with two hands for increased torque and increased speed, making....
  • DURABLE CONSTRUCTION: Lug installation tool is made with heat-treated, carbon steel for increased strength and longevity.
Check Stock

USWEL Titanium Bracelet for Men Black PVD Coating 591pcs Minerals Magnetic Bracelet for Men (Black)

  • Upgraded Magnetic Bracelet：containing 591pcs Minerals, there are four elements on each magnetic bracelet, which are distinguished by four colors. The four elements interact, forming a magnetic field effect around the body, through physical effects,those bodies will full of energy, and have good sleep..
  • Mens bracelet: 8.5" long adjusted size with link removal tool inside the package, 0.82" wide, 38g only, perfect accessory and partner to your wrist watch and other wrist jewelry, let u attract more attentions from friends.
  • Pure titanium products (99.9%).Light, well corrosion resistance, non-toxic, never fade, never deformed, will not cause allergies to skin.Titanium is one of the stronest, most durable metal on earth..
  • The Perfect Gift – This elegant magnetic bracelet arrives in a luxurious gift box and includes a sizing tool and instruction manual - making it the perfect gift for a friend or loved one!.
  • Black Bracelet: Black PVD coating with minimum 2 years no fade on normal wearing. We promise that if there are any quality problems from the date of purchase, please contact us, we will respond immediately to resolve the problem. If extra links needed, please write to us..
Check Stock

Genesis GAMT601 Scraper Blade Set 2-Piece

  • 2-Inch Flexible Scraper blades for removal of caulk, coats of peeling paint and soft adhesives.
  • 2-Inch Rigid Scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives.
  • Stainless Steel construction for smooth scraping and reliability.
  • Primarily used for "Scraping" with your Oscillating Tool.
  • Genesis Universal Quick-Fit Oscillating Tool Accessories fit most standard AND tool-free oscillating tools, including the popular Genesis GMT15A.
Check Stock

Elite Gourmet ETO4510B French Door 47.5Qt, 18-Slice Convection Oven 4-Control Knobs, Bake Broil Toast Rotisserie Keep Warm, Includes 2 x 14' Pizza Racks, Stainless Steel

  • 45L capacity - Fits 9 slices of toast on 2 racks for a total of 18 slices and roasts up to a 20lb turkey. Four rack positions fit up to 2 x 14" pizzas with interior dimensions of 16-3/8 W x 15-7/8 D x 8-1/2 H (upper element to rack at bottom position).
  • French dual door design allows you to open one or both doors at a time saving precious counter space. Four rack positions allow you to cook multiple dishes at once.
  • Convection feature circulates hot air inside the oven for flakier crusts, deeper flavors and more tender meats, in less time. Rotisserie spit & Fork assembly rotates food inside the oven while roasting it to perfection..
  • Independent Temperature Knobs up to 450°F to separately control top and bottom heating elements - turn on only one or both at the same time.
  • 60-minute timer with signal turns oven off automatically.
  • Stainless Steel door handle, frame, and panel adds style and elegance. Oven door constructed of safety tempered glass, and slide-out crumb and grease tray makes clean up a cinch..
  • Comes with 2 x removable wire racks, 1 x baking pan, 1 x crumb tray, 1 x rotisserie rod and prongs, 1 x rotisserie removal tool, 1 x tray removal tool.
Check Stock

27213 Master Wheel Hub and Bearing Remover and Installer Tool Kit, Back and Front Wheel Bearing Puller Kit, Back and Front Wheel Hub Puller

  • 【WIDE COMPATINILITY 】-- Universal, provides various size of adapters makes installing wheel hubs and bearings on most domestics and foreign cars-rear, front, and four-wheel drive much easier. Compatible with BMW/Benz/Porsche/VW and most domestic/Asian/European vehicles. Works on Front, Rear and All-Wheel Drive Vehicles..
  • 【UPGRADE DESIGN】-- Designed with slide-hammer-free removal, make the job much simple that can easily install the hub and bearing changes on most cars. Under without the use of a hammer or a shop press, only use this tool be able to easily remove and install wheel hub and bearing assemblies as well as inner bearings. Whether it is a professional or DIY mechanic, can be easily, accurately and safely completed the disassembly and installation of the wheel hub and bearing on the vehicle..
  • 【SUPERIOR MATERIAL】-- Made of solid carbon steel with resisting impact and no deformation, surface black anodized anti-rust finish to anti-rust and anti-corrosion for years of trouble-free use. Mold-blown plastic case is convenience to carry and storage. Alternative to OEM 27213, quality and function meet to OEM. High precision and hardness, designed with o....
Check Stock

Elite Gourmet ETO-4510M French Door 47.5Qt, 18-Slice Convection Oven 4-Control Knobs, Bake Broil Toast Rotisserie Keep Warm, Includes 2 x 14\ Pizza Racks, Stainless Steel

  • 45L capacity - Fits 9 slices of toast on 2 racks for a total of 18 slices and roasts up to a 20lb turkey. Four rack positions fit up to 2 x 14" pizzas with interior dimensions of 16-3/8 W x 15-7/8 D x 8-1/2 H (upper element to rack at bottom position).
  • French dual door design allows you to open one or both doors at a time saving precious counter space. Four rack positions allow you to cook multiple dishes at once.
  • Convection feature circulates hot air inside the oven for flakier crusts, deeper flavors and more tender meats, in less time. Rotisserie spit & Fork assembly rotates food inside the oven while roasting it to perfection..
  • Independent Temperature Knobs up to 450°F to separately control top and bottom heating elements - turn on only one or both at the same time.
  • 60-minute timer with signal turns oven off automatically.
  • Stainless Steel door handle, frame, and panel adds style and elegance. Oven door constructed of safety tempered glass, and slide-out crumb and grease tray makes clean up a cinch..
  • Comes with 2 x removable wire racks, 1 x baking pan, 1 x crumb tray, 1 x rotisserie rod and prongs, 1 x rotisserie removal tool, 1 x tray removal tool.
Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

  • All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
  • SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
  • The pilot bit – designed to start holes in a variety of materials.
  • Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • Durable hole saw material – hole saws are made with 8% cobalt alloy.
Check Stock

Red Devil 4050CL Classic Scrape & Pry bar Silver

  • High Quality Steel: Drop forged and heat-treated 4140 steel wedge is perfect for prying or positioning of sheet metal. Originally developed for the aircraft industry, thin high strength wedge has become popular among car enthusiasts..
  • Panel Removal Tool: Great for high strength prying of car interior panels if used with care. Fits into any crevice and works flawlessly in removing exterior & interior trim, molding, wheel hubs, door panels, fastners, dashboards and more without scratching or marring your car..
  • Auto Trim Removal Tool: Extremely Strong thin tip with very little deflection. Superior to plastic pry tools. Ergonomically designed to fit well into your hand making it easy to access hard to reach places. Makes jobs a lot easier. You'll do things more quickly and efficiently with this pry tool..
  • Pry Tool: Great for separating templates used in Router Fabrication. Perfect for any mechanics or professionals doing car modifications. Compact size makes carrying in your pocket or storing it in your car anywhere..
  • Automotive Pry Tools: This magnificent door panel removal tool takes the place of the entire auto trim removal tool set or interior trim removal kits. Why burden yourself with an arsenal of useless plastic panel removal tools when this One....
Check Stock