ReviewsUniversal Serial Bus Usb

Agastat TE Connectivity 7022AC Time Delay Relay 120VAC Off-Delay 1.5 - 15 Seconds

....Added USB protection, CAN bus protection circuit..
Double way USBCAN II debugger can be used as a standard CAN bus, CAN bus is CAN bus equipment product development, testing, a powerful tool for data analysis.
at the same time, the USBCAN debugger has the characteristics of small volume, convenient insta.
Compatible universal USBCAN device.Single channel maximum reception capacity more than 14000 frames per second, the highest transmission capacity of 3000 frames per second,Do not crash, do not lose frame.Dual channel at the same time when receiving the highest reception capacity of 8500 frames per second.Support CAN relay function, realize the 2 CAN channel data at different baud rate under transparent transmission..

Check Stock

TOTMC USB 2.0 Video Capture Adapter for Windows Xp, 2000, Vista, Window 7, Window 8

Support For All Formats: record in DVD+/-R/RW, DVD+/-VR, and DVD-Video.
Complies With Universal Serial Bus Specification Rev. 2.0.
Support Brightness, Contrast, Hue, and Saturation control.
Can capture analogue files from VHS, V8 to H.264.MPEG-4.
Could capture audio without the sound card.
Include Professional and easy to learn & used video editor software. Brand:TOTMC.

Check Stock

BIGTREETECH SKR PICO V1.0 Control Board: Mini Controller Board with TMC2209 UART Stepper Motor and Raspberry Pi Online Printing for Voron V0 V0.1 3D Printer Parts

【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V..
【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing..
【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion.
at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer..
【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port..

Check Stock

NADAMOO Barcode Scanner Module EP7000, Embedded 1D 2D QR Auto-scan Barcord Reader Support Screen Scan with USB (SDK & Serial Command Available for Development) Fixed Mount to Self-Service Equipment

1.【Superior Decoding Ability】 Equiped with advanced CMOS sensor , Support to read 1D 2D Codes on screen and paper.
Ability to scan blurred, broken, irregular and colorful barcodes.
Scanning performance is more prominent especially for mobile phone screen..
【Small in size】 Extremely small and easy to embedded and fixed into miniature equipment..
【Easy To Use】USB plug and play ,easy to use.
Support Auto-scan, once the barcode presented in front of the the scanning window, the scanner will instantly wake up to read the barcode..
【Wide-range in application】Applayed to road gate, self-service machine, ticket machine, intelligent express cabinet, intelligent bus ,etc..
【Support custom development】Multiple interface to option(USB, serial（TTL,RS232,RS485）, weigand).
provide SDK & Serial Command Available for Development.
Support to resize hardware. Please contact us for details..

Check Stock

SABRENT USB 3.0 to SATA External Hard Drive Lay-Flat Docking Station for 2.5 or 3.5in HDD, SSD [Support UASP and 20TB] (EC-DFLT)

Supports all 2.5 and 3.5-inch SATA drives.
Connects via SuperSpeed USB 3.0 (up to 10x as fast as USB 2.0).
UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system.
Serial ATA bus up to 6Gbps Signal bandwidth for fast storage backups.
This Docking station comes with a free download of Acronis True Image for Sabrent software for easy cloning.

Check Stock

Aideepen 5PCS DHT22/AM2302 Digital Temperature and Humidity Sensor Module Temp Humidity Monitor 3Pins Module with Cable

Main Chip: AM2302 high sensitive temperature humidity sensor. Single-bus digital signal output, bidirectional serial data.
Single bus digital signal output, two-way serial port data.
Temperature range: -40 to 80 degree celsius, Temperature measurement accuracy: +/- 0.5℃ degree celsius.
Humidity measuring range: 0~100%RH, Humidity measurement accuracy: ±2%RH.
*With fixing screw hole, convenient to install and fixed Size:43*15*10mm/1.69*0.59*0.39in.

Check Stock

Futaba R7014SB 2.4GHz 14CH FASSTest/FASST Receiver RC Radio Receiver

The perfect receiver for FASST or FASSTest radios with S.Bus and S.Bus2 serial bus system set-ups!.
Comes with standard PWM and S.Bus output ports for the ultimate in versatility..
Diversity antennas ensure superior reception, regardless of placement..
An easy binding button makes it easy to link to your transmitter..
Use with Futaba Telemetry Sensors (FUTM0850-FUTM0860, sold separately), to display data on your FASST or FASSTest transmitter.

Check Stock

BIGTREETECH Direct Octopus V1.1 Silent 32 Bit Control Board 3D + TFT35 E3 V3.0 Two Mode Display Screen 3D Printer Parts for Creality Ender 3/5 CR10

【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....

Check Stock

AITRIP 10PCS PCF8574 PCF8574T IO Expansion Board I/O Expander I2C Evaluation Develop Module

The PCF8574 IO Expansion Board provides general-purpose remote I O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)..
The main resources: PCF8574, I2C interface, the 8-bit parallel.
Typical applications: for I / O resource constraints the MCU I / O expansion.
PCF8574T expansion board applicable to a variety of platforms including AVR / ARM.
PCF8574T PCF8574 IO expansion board support I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules).

Check Stock

DTECH 6 Feet USB to RS232 DB9 Female Serial Adapter Cable Windows 11 10 8 7 Mac Linux Serial to USB 2.0 (PL2303 Chip)

RS232 USB to serial female adapter cable allows any PC to connect serial devices and programs that communicate through COM ports.
DB9 Serial cable to USB adapter is designed for connecting Serial devices such as DB9 equipped PCs, routers, GPS, Programming machine, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs and digital organizers, etc.
6ft USB to serial cable with standard USB Type A Male to standard 9-pin DB9 Female RS-232 serial connector.
USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 11, 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
Note that the interface is 9-pin RS232 Female socket, please make sure that your serial device with a 9-pin Male Port before purchasing this USB to serial port adapter with Prolific PL2303 chipset (NOT FTDI chip).

Check Stock

BANVIE Car Alarm System with Remote Start Starter

CS7900-AS:2-Way Paging Remote Start/Keyless Entry 2-Way Keyless Entry/Remote Start/Vehicle Security Car Alarm System with 2-Way LCD Remote and Backup 1-Way Transmitter Installation NOT Included.
4-button sidekick remote control transmitter 3000 feet range.
105 dB Alarm Siren Included Supports up to 2 vehicles.
iDatalink ADS-BLADE AL:Universal 'all-in-one' integration cartridge.
Universal 'all-in-one' integration cartridge. Web-programmable data immobilizer bypass and doorlock integration for over 4000 vehicle models from 1997 to date including exclusive KLON firmware applications. Inserts directly in Blade-compatible remote start, vehicle security and convenience products for seamless integration..
ADS-USB: Weblink USB Interface Weblink USB to Serial Computer Interface Cable and Software.

Check Stock