ReviewsUphere Gpu Brace Install

upHere U1207 USB Fan Dual-Ball Bearings,Rainbow LED,Multi-Speed Control,Silent 120mm Fan for Computer Cases Computer Cabinet Playstation Xbox Cooling

1.【Multi-Speed Speed Controller】upHere U120 USB fan 120* 120* 25mm with speed switch, 3 levels adjustable speed to meet different cooling needs, Protect your devices..
2.【Dynamic Rainbow Effect 】Equipped with 12 super bright RAINBOW with dynamic vivid Rainbow illumination effect for a bright and clean visual experience..
3.【Dual Ball Bearing】High quality dual ball bearing has a lifespan of 70,000 hours. Fan can be used both lying and upright..
4.【Portability】Allows fans to be powered through USB ports found behind AV Cabin,PlayStation and other equipment.Giving you near endless possibilities for using the fan in your home, in your car or wherever a need for cooling occurs..
5.【Widely used】 upHere U120 120 * 120*25mm USB Cooling Fan, ideal for cooling PC / Laptop / TV Box / Receiver / AV Cabin / PS4 / Projector / Router, protect your equipment from damage..

Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....

Check Stock

1/4 Classifier Sifting Pan Gold Panning Fits 5 Gallon Bucket Mesh Screen

OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....

Check Stock

8 PCS Heavy Duty Corner Brace FANDAMEI 40x40mm Stainless Steel Joint Right Angle Brackets with Screws 90 Degree Wall Brackets Hanger for Shelves Tables Dressers Chairs Silver

Thickened corner brace size is about: 40*40*20mm(L*H*W), Thickness: 3mm.
a pair of heavy duty corner brace can support heavy weight up to 38lb. Very....
High quality material: made of solid stainless steel with excellent workmanship, brushed finish, no burrs, not scratch your hands and get oxidized.....
Easy to install: just drill a hole on the wall or on wooden board and screw the bracket on to wall or board. This corner brace can fix firmly with any....
Widely applied: this small corner brace can used to fix any kinds of furniture, such as book shelves,chair corner, table leg, bed, cupboard, even....
Package include 8 pcs corner braces and 32pcs M4 screws, very humanized package content, all screws you needed to install the brace are included.

Check Stock

Michal Tech Hobby Mining GPU Hanger for Wire Rack Pack of 6

HOBBY VARIATION - Heat resistant for complete open air system only. High heat tolerant variation for enclosed systems NOW FOR SALE: PROFESSIONAL GPU....
SIMPLE and CONVENIENT - Compatible with almost all wire racks.
EASY TO INSTALL - This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on....
Full kit includes set of 6 screws and 6 hangers..
NOTICE - GPU's with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU,....

Check Stock

Mining Rig Frame - 12 GPU Steel Open Air Miner Mining Computer Frame Rig Case for Crypto Coin Currency Bit Coin ETH ETC ZEC Mining Accessories Tools - Frame Only Fans & GPU is not Included

▶▶▶【Slot】12 GPU slots. (GPU is not included). 12 card spacing is 61MM. The length of the graphics card is unlimited..
▶▶▶【Easy to install】Easy to install and strong structure. Keep all cables clean and organized, along with everything in your mining machine..
▶▶▶【High Quality Material】The open air mining frame case made up of the highest quality stainless steel material, strong, durable and....
▶▶▶【Perfect Design】Professional design for mining rig frame, accelerating the air convection, super cooling design for heat dissipation.....
▶▶▶【Note】The Frame Only, Not includes Fans or other CPU, GPU, PSU, Motherboards, Cables. If you are not 100% satistifed with this Miner,....

Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....

Check Stock

upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum Black (G195BK)

1.Fully Made of Alumium Alloy. providing strong and long lasting support. By using all-aluminum metal material rather than plastic material,upHere G195 graphics card support stand can avoid the fragile and ageing problem of plastic material, it can be used for a long time even other hardware have been upgraded..
2.Segmented and slide design, compatible with traditional MATX, ITX and long PSU bracket cases, Support 1 Graphics Cards/CPU Fans Max.Match various computer case and motherboard..
3.Concealed Magnet Design Base. With hidden magnet designon bottom, it not only lets user install it easily but also stand firmly inside the case..
4.Showing the details of the workmanship. It is a small graphics card support stand with three complex production process..
5. A.Tool-less screws are used for fixing the support module.B.The support module is equipped with cushioning scratch-proof pad.C.The base adopts high glossy process..

Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

...】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use.Compatible with Win10 /OS, but you'll need to install the system yourself..
【Kindly Note】The new version of mining case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating. The miner machine system doesn't come with GPU. Our products have undergone strict quality inspection before leaving the factory. If you encounter any problems during use, please feel free to contact us..

Check Stock

HELOIA Mining Rig Frame - 6/8 GPU Steel Open Air Miner Mining Computer Frame Rig Case for Crypto Coin Currency Bitcoin ETH ETC ZEC Mining Accessories Tools - Frame Only Fans & GPU is not Included

【Slot】6/8 GPU slots. (GPU is not included). 6 card spacing is 81MM, 8 card spacing is 61MM. The length of the graphics card is unlimited..
【Easy to install】Easy to install and strong structure. Keep all cables clean and organized, along with everything in your mining machine..
【High Quality Material】The open air mining frame case made up of the highest quality stainless steel material, strong, durable and available.....
【Perfect Design】Professional design for mining rig frame, accelerating the air convection, super cooling design for heat dissipation. Enough space....
【Note】For installation steps, please refer to the main image of the user manual on the left. The Frame Only, Not includes Fans or other CPU, GPU,....

Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw

...RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1).
Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
【ULTRA PCIE4.0 Right Angle-25cm: B08XMZ788Y】【ULTRA PCIE4.0 Left Angle-15cm: B0964B4G2S】【ULTRA PCIE4.0 Straight-....

Check Stock