ReviewsUpholstery Staples 4

Arrow T50X TacMate Heavy-Duty Staple Gun for Upholstery Furniture Office Decorating Fits 1/4 5/16” 3/8 or 1/2 Staples

  • READY FOR ACTION: This stapler is great for professional or household projects like installing insulation, upholstery, general repairs, classroom....
  • COMFORT AND PROTECTION: The lightweight tool housing and molded handle provide a comfortable and secure grip.
  • A non-marring rubber tip keeps projects....
  • HEAVY DUTY CONSTRUCTION QUALITY: Metal internal components deliver a durable and powerful tool.
  • Whether applying fabric to furniture or adding....
  • EFFICIENCY AND VISIBILITY: The bottom-load magazine makes it easy to load new staples.
  • The staple-viewing window takes the guesswork out of knowing....
  • CHOOSE THE RIGHT STAPLES: This tool uses Arrow T50 staples (sold separately) in 1/4-Inch, 5/16-Inch, 3/8-Inch, or 1/2-Inch.
Check Stock

Upholstery Staple Remover | Tack Lifter Tool With Double Pronged Head For Pulling Nails Staples and Tacks.

  • EASILY REMOVE STAPLES, NAILS, AND TACKS: This staple puller tool makes it easy to remove staples, nails, and tacks from upholstery or other materials..
  • GET LEVERAGE EASILY WITH THE LENGTH AND ANGLE OF THE STEEL ROD: The 15 degree bend is just the right amount to give you the leverage to pull any....
  • SHARP PRONGS GET UNDER THE MOST STUBBORN FASTENERS: The super sharp double pronged tip allows you to wedge under those tightly fastened staples..
  • COMFORTABLE HANDLE: The common screwdriver handle we’re all familiar with makes this upholstery tool feel like it has been in your toolbox forever.....
  • ELECTROPLATED TREATED STEEL WONT BEND OR CHIP: Don’t worry about the sharp points chipping. The treated steel is hard enough to withstand the....
Check Stock

Woodpecker N7116S Pneumatic Continuous Firing Upholstery Stapler, 22 Gauge 71 Series 3/8-inch Crown Fits 3/16-inch to 5/8-inch Staples

  • ... 【Precise & Efficient Shooting】The good manufacturing in muzzle makes it slim, precise, and sturdy, which minimizes the odds of jamming to ensure stable performance. At the same time, it is also extremely fired well even in tight spots. Compare to the traditional manual upholstery stapler, there is an obvious efficiency improvement in attaching fabric, trim or other upholstering.
  • 【Easy to Maneuver】Bottom slide loading makes reloading convenient and quick. The textured rubber handle gives you a good grip. The trigger is sensitive for reducing your finger fatigue in the long using time.
  • 【Suitable Staples & Practical Application】Comptatible with 22 gauge 71 series 3/8'' (9mm) crown, 1/4'' to 5/8'' (6-16mm) length staples. Widely used in upholstery, like repairing furniture, cabinets, renovation, decoration, even attach or fasten the items you want.
Check Stock

meite 20GA 50Series 5012 1/2-Inch Crown by Leg Length 1/2-Inch Galvanized Fine Wire Staples(5000pcs/Box) (1-Box Pack)

  • For Upholstery . Furniture . All Type Wood Working..
  • 20 gauge 1/2-inch crown, 1/2-inch length upholstery staples.
  • Related Products: meite 20GA MT5016S, MT5016SLN 1/2'' Crown Fine wire Staples.
Check Stock

VERCCA Upholstery Staple Remover, Staple Puller, Tack Lifter Tool with Double Pronged Head Nail Remover for Furniture Carpet Floor Carton Photo Frame Office 2pcs

  • Double Pronged Head Design: The upholstery staple remover is designed with ultra sharp double pronged tips, allows you to wedge under and pull out the deeply embedded staples or any stubborn fastners without damage the surface.
  • Ergonomic Handle: The staple puller comes with a curved plastic handle, the tack remover has a multisided handle with non-slip design to keep from rolling, super light-weight, you can handle this upolstery tool with ease.
  • Easy to Use: This upholstery tool has a leverage design with 15 degree bend and it is just the right amount for you to pull out any staples, tacks or nails quickly and easily, protect your hands from stress or pain, save your time and effort.
  • Premium Quality Construction: The Staple Remover is made of hardened steel with quenching treatment to enhance its strength, will not bend or chip.
  • The tack lifter has excellent rust-resistance and long lasting performance for your daily reupholstery.
  • Functional and Versatile: This upholstery tack lifter is ideal for carpenter, handyman, professional or amatuer to remove staples or nails from furniture....
Check Stock

Arrow 214 JT21 Thin Wire Staples for Staple Guns and Staplers, Use for Upholstery, Crafts, General Repairs, 1/4 Inch, 1000-Pack

  • READY FOR ACTION: These staples are used for all stapling applications that use a thin wire: from general repairs, to crafts, upholstery, and fabric work, the JT21 has the same quality and precision as the T50 heavy duty staples, for great holding power.
  • USE THE RIGHT TOOL: These staples are designed to be used with Arrow staple guns, including the TT21 TruTac Forward Action Staple Gun, the JT21CM Professional Light Duty Staple Gun, and the JT27 Light Duty Staple Gun.
  • HIGH-QUALITY CONSTRUCTION: The heavy-duty galvanized steel construction is designed for durable long-term holding.
  • DRIVES DEEP: These staples feature precision points that drive deep into the base materials to ensure a firm, lasting hold when stapling into wood, fabric, carpet, or other materials.
  • DIMENSIONS AND COMPATIBILITY: Leg length 1/4 Inch (6mm).
Check Stock

meite 21 Gauge 1/2-Inch Crown by Leg Length 3/8-Inch Galvanized Fine Wire Staples Upholstery Staples for MT8016 Stapler(10,000pcs /Box) (1)

  • For Upholstery . Furniture . All Type Wood Working..
  • Staples Compatible With meite MT8016, 8016B, 8016BL, MT8016LN Staplers.
  • 21GA 1/2-Inch Crown, 3/8-Inch Length upholstery staples.
Check Stock

Arrow T50 Heavy Duty Staple Gun Kit, All Chrome Steel Stapler, with 3750 Pieces T50 1/4", 3/8", 1/2" Staples, for Upholstery Professional Projects

  • 3750 Pieces T50 Staples: Come with 3750 Pieces 1/4", 3/8", 1/2" Arrow T50 staples (Each 1250 Pieces), providing options for a variety of projects.
  • Heavy Duty Construction Quality: Features a all chromed-steel housing which will have the strength for any job. The steel parts have been hardened in a 1,500-degree furnace for maximum durability.
  • Easy Operation: The rear-load magazine with jam-resistant mechanism provides a smooth stapling experience.
  • The staple-viewing window takes the guesswork out of knowing when to reload that will make your work more efficient.
  • Comfortable Grip: The high leverage handle on this stapler provides a comfortable experience and helps ensure that each strike drives the staples though the materials you are fastening, save time and energy.
  • Wide Application: The Arrow T50 stapler is compatible with 1/4"(6mm)-9/16"(14mm) T50 staples. It's great for professional or household projects like installing insulation, upholstery, general repairs, and crafts.
  • It belongs in the workshop of any builder, maker, or crafter.
Check Stock

meite 22GA 71 Series or C Crown 3/8-Inch Crown by Leg Length 3/8-Inch Galvanized Fine Wire Staples Upholstery Staples 10000pcs/Box

  • 22 Gauge 3/8-inch crown, 3/8-inch leg length upholstery staples.
  • For Upholstery . Furniture . All Type Wood Working..
  • Staples Compatible With meite MT7116, 7116C, MT7116S and MT7116LN Staplers.
Check Stock

HAUSHOF Light Duty Staple Gun Kit, Fits JT21 Staples of 1/4'' & 5/16'' & 3/8'', Includes 800 Staples of 5/16'' and A Staple Remover, Staple Gun for Upholstery, DIY, Decoration, Carpentry, Furniture

  • 【Suitable For JT21 Staples】The light duty staple gun fits 3 1/4’’ (6mm), 5/16’’ (8mm), 3/8’’ (10mm), equivalent to arrow JT21. Comes with 800pc staples of 5/16''..
  • 【Multiple Functions】6 mm staples can be used on window screens & shades, shelf papers, closet lining.
  • 8mm staples can be used on light upholstery and other relatively thin materials.
  • 10mm can be used on insulation, weather stripping, wire mesh, carpet pads, canvas and other materials of moderate strength where material thickness is up to about 3/16”maximum..
  • 【Ergonomic Design】The staple gun has linear power curve which will comfort users. Loading staple becomes easier and quicker with the magazine release latch..
  • 【Easy & Safe Storage】The handle can be locked to become shape-regular and prevent accidents. It only takes up a little storage space..
  • 【What You Can Get】 1 x light duty stable gun, 800 x staples of 5/16’’ (8mm), 1 x staple remover, 1 x instructions. You are always welcomed to contact us whenever there is problem with the product..
Check Stock

Heavy Duty Hammer Tacker Stapler T50 6-14mm 1/4" to 9/16" with 200 Staples

  • This Heavy duty Hammer Tacker is suitable for insulation, house wrap, roofing, wiring, carpeting, upholstery, hobby and crafting, and more..
  • Rugged alloy steel contruction with Chromed finish.
  • Convenient bottom loading for quick and easy jam clearing.
  • Compatible with 1/4" - 9/16" (6mm-14mm) staples.
  • Overall dimension: 13.5(L) x 3.5(H) x 1.5(W) inch.
Check Stock