ReviewsUsb Camera For Raspberry Pi 4

CanaKit Raspberry Pi 4 Extreme Kit - 128GB Edition 4GB RAM

  • Includes Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM).
  • Includes 128GB Samsung EVO+ Micro SD Card (Class 10) Pre-Loaded with NOOBS, USB MicroSD Card Reader.
  • CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan.
  • CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter, Set of Heat Sinks, Set of 2 Micro HDMI to HDMI Cables - 6 foot (Supports up to 4K....
  • CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4).
Check Stock

Vilros Raspberry Pi Zero W Basic Starter Kit- Black Case Edition-Includes Pi Zero W -Power Supply & Premium Black Case

  • Includes Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE).
  • 2.5A Power Supply Designed for Raspberry Pi-HDMI-Mini HDMI Adapter-Micro USB OTG.
  • Premium Black Case with 3 Covers-1 Closed Cover-1 with GPIO Access Cover-1 with Camera Mount Cover.
  • 40 Pin Header---Heatsink for Raspberry PI Zero--Camera Module Adapter.
  • All Parts Covered Under the Vilros 1 Year Warranty.
Check Stock

Raspberry Pi Noir Camera Module V2 8MP 1080P for Raspberry Pi 4, 3 B+, 3B, 2B, Pi Zero RPi Infrared Night Vision

  • NEW RASPBERRY PI CAMERA MODULE V2: MX219 8-megapixel sensor with fixed focus lens, which is not only a resolution upgrade, but also a leap forward in image quality, color fidelity, and low-light performance..
  • HIGHER RESOLUTION: NOIR Camera V2, Capable of 3280 (H) x 2464 (V) still picture resolution and supports 1080p30, 720p60, 640×480p90 and VGA90 video modes. No infrared filter, supports night vision..
  • BETTER COMPATIBILITY: This RPi camera module supports all models of Raspberry Pi 4, Raspberry Pi 3, Raspberry Pi 2 and 1 and Jetson Nano Developer Kit..
  • WILD APPLICATION: This pi camera can be used to take high-definition videos as well as still photographs. It can capture IR photographs, better performance in the night and low light vision, especially suitable for wildlife photography, home security and surveillance, NDVI in agriculture, etc..
  • PACKAGE LIST: An 8mp Raspberry Pi official NOIR camera V2 with a 15cm original FFC cable..
Check Stock

SmartiPi Touch Pro - Case for The Official Raspberry Pi 7 Touchscreen Display - with Cooling Fan

  • Works with the Official 7" Raspberry Pi display and Raspberry Pi B+,2B,3B,3A+,3B+, and 4.
  • Includes a cooling fan with rubber vibration mounts.
  • Works with Raspberry Pi HAT boards and has secondary mounting points for your own development board.
  • Raspberry Pi, Raspberry Pi camera, and Raspberry Pi display not included.
  • Port blocking part to cover the Raspberry Pi ports included.
Check Stock

Smraza Raspberry Pi 4 Case, Metal Case for Raspberry Pi 4 Model B with Cooling Fan 35MM, Pi 4B Case Aluminum Alloy Enclosure with 4 PCS Heatsinks Pillar Thermal Adhesive Black (RPI Board Not Included)

  • Raspberry Pi 4 Case - Only compatible with Raspberry Pi 4 Model B. Access to all ports for Pi 4. Not for Pi 3B+. And RPI board not included..
  • Cooling System - Raspberry pi 4 case with cooling fan and built-in 4pcs thermal adhesive to tightly touch with on-board raspberry pi 4 chipset. Better for heat dissipation. Size of fan: 35 x 35 mm(If you reveive wrong size, please reaching us to get a right one.) Size of heatsinks for CPU: 25 x 25 mm..
  • Access to All Ports - Metal case for raspberry pi 4 can access to all ports for Pi 4. Such as the dual micro HDMI port, USB-C power connector port, Audio/Video port, USB and Ethernet ports and micro SD card slot..
  • High Quality Metal Material - Raspberry pi 4 fan case made of smooth and straight aluminum material, Ultra-thin design & Easy to install. Strong metal case can protect your raspberry pi 4 from scratched, dust, damaged..
  • Satisfaction Guaranteed - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution..
Check Stock

CanaKit Raspberry Pi 4 8GB Extreme Kit - 128GB Edition 8GB RAM

  • Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM).
  • Includes 128GB Samsung EVO+ Micro SD Card (Class 10) Pre-Loaded with NOOBS, USB MicroSD Card Reader.
  • CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan.
  • CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter, Set of Heat Sinks, Set of 2 Micro HDMI to HDMI Cables - 6 foot (Supports up to 4K....
  • CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4).
Check Stock

LoveRPi Ultra Wide Angle Camera for Raspberry Pi 4/3/2/Zero W (5MP, 220 FOV)

  • ULTRA WIDE ANGLE 220* CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for ultra wide angle, low latency, and high quality imaging required for computer vision, streaming media, and remote data acquisition..
  • INTEGRATED IR FILTER: Infrared light is invisible to the naked eye but will cause hue changes to CMOS camera sensors. The integrated filter prevents infrared light from distorting the image hue resulting in color accurate imagery for daytime outdoor applications..
  • AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality. Additionally, it has built-in 50Hz/60Hz anti-flickering, lens correction, and defective pixel cancelling functions..
  • SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for Raspberry Pi Zero, Pi Zero W, and Pi 0WH are also included. Open a terminal, type in "sudo raspi-config.
Check Stock

LoveRPi Noir Camera for Raspberry Pi 4/3/2/Zero W 5MP No IR Filter

  • NOIR CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi....
  • NO IR FILTER: Designed for low light and infrared applications, this camera module captures infrared light for higher contrast in dark environments.....
  • AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality.....
  • SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for....
  • USER UTILITIES: There are two command-line utility "raspistill" and "raspivid" for capture images and videos respectively. There are user-developed....
Check Stock

NorthPada Raspberry Pi 3 Model B B+ A+ Plus Power Supply Charger AC Adapter Cord 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch, with a USB C Adapter for Raspberry Pi 4 Model B, Pi 400

  • Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3000mA/3A.
  • Cable Length: 150cm/5Feet with On/Off Power Switch, Inline Noise Filter.
  • For Raspberry Pi 3 Model B B+ A+, Raspberry Pi 2 Model B, Raspberry Pi A/A+/B/B+, Raspberry Pi Zero, Raspberry Pi Pico, ASUS Tinker Board S.
  • Come with a micro USB to USB C Adapter, it can also support Raspberry Pi 4 Model B, Raspberry Pi 400.
  • Package included: 1 x 5V power supply with micro usb, 1 x micro USB to USB C Adapter.
Check Stock

Arducam 16MP Camera for Raspberry Pi, IMX298 Programable Motorized Focus Pivariety, Compatible with Raspberry Pi ISP and Gstreamer Plugin

  • Major Breakthrough: Arducam Pivariety series not only breaks the limitation of the Raspberry Pi camera’s resolution and sensors, but also supports hardware ISP functions like AEC/AGC, etc. In other words, with Pivariety, you can get higher resolutions with the same decent image quality as the Official cameras. NOTE: The newest version C doesn't come with a camera adapter board, you can directly connect to raspberry pi to use...
  • Still Image: This camera module adopts the IMX298 sensor for 16MP higher resolution than 12.3MP IMX477 Raspberry Pi High Quality Camera.
  • ISP output image format of JPG, YUV420, RAW, DNG..
  • Capture Video: supports frame rates 4640×3472@10 fps, 2320×1732@20 fps, 3264×2464/3840×2160@15 fps, 2592×1944@20 fps, 1920×1080@30 fps, 1280×800@45 fps, 1280×720@50 fps.
  • ISP output video format of MJPEG, H.264..
  • Focal length: 4.04mm, can be adjusted via programmable focus control.
  • Compatibility: supports Raspberry Pi 4, Pi 3/3B+/3A+, and other A & B models(Except Raspberry Pi 2B and Zero). Compatible w/ all libcamera-based apps maintained by the RPi foundation, like Gstreamer, OpenCV etc. NOTE: Pivariety can only work with libcamera instead of raspistill appl....
Check Stock

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Check Stock