ReviewsUsb Oscilloscope Cable

Goupchn MCX Oscilloscope Probe 60MHz 1X 10X Alligator Clip for Mini DSO Nano Portable Oscilloscope DS201 DS202 DSO201 DSO202 VC101 VC102 with Accessory Kit

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • MCX oscilloscope probe has compact size. Multiple functions are combined in one. It is convenient to use. The MCX probe is firmly connected to the cable and will not fall off after repeated use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Package includes: 1 x probe, 8 x marker rings, 2 x insulated protection caps, 1 x probe hook, 1 x user manual..
Check Stock

SKYXIU Digital Tablet Oscilloscope,with 2 Channel Handheld Multifunction Oscilloscope,100Mhz Bandwidth,1GSa/s Sampling Rate 7\ TFT LCD Touch Screen(1013D Plus)

  • 【7-inch LCD display】This mini oscilloscope has a resolution of 800*480, bright colors and high contrast.Capacitive touch panel. Touch sampling rate is similar to tablet PC, touch sensitive..
  • 【PROFESSIONAL DESIGN】This 2 channel oscilloscope with100 MHz analog bandwidth @ 1 GSa/s Real-time sampling,240kbit Sample memory depth..
  • 【INTELLIGENT ANTI-BURN】This portable oscilloscope with Intelligent anti-burn,Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V.Built-in 6000mAh high-performance lithium battery,can be used continuously for 4 hours after fully charged.(Note:Before use,please read the manual attached to the product. If you have any questions,you can contact us.).
  • 【MULTIFUNCTION OSCILLOSCOPE】This lab oscilloscopes with powerful waveform picture manager supports thumbnail browsing,viewing,detailed viewing,page turning,deletion and waveform zoom in,zoom out,move,etc.Equipped with a USB interface,it can be connected to a computer to share screenshots with the computer, which is convenient for secondary analysis..
  • 【MEASUREMENT RANGE】This tablet oscilloscope has High measurement voltage range,1X can measure 0 ~ 40 V,10X can measure 0 ~ 400Vm,100X can measure 0 ~ 4000V.Up to 12 parameters measuremen....
Check Stock

DP10007 Oscilloscope Probe, DP10007 100MHZ 700V Probe, High Voltage Accessory for Voltage Testing

  • The attenuation rate is 10X, which can be used in any brand of oscilloscope, meet the needs of floating measurement..
  • DP series high‑voltage differential probes, specially designed for the measurement of high‑voltage differential signals..
  • High‑voltage differential probes sample high‑impedance isolation between input and output to protect person safety..
  • The power supply adopts USB DC 5V output and has a USB interface, which is easy to use and carry..
  • Convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Assembled Finished Machine EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be....
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div....
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also....
Check Stock

Hantek 2D42 3in1 Handheld Oscilloscope/Waveform Generator/Digital Multimeter with USB Port, 2 Channels 40MHz 250MSa/s Multifunction Tester

  • ⚡【Automotive Oscilloscope】 4 Channels oscilloscope, 1GSa/s real time sampling rate, 2mV-10V/DIV high input sensitivity and large input range, 250MHz high bandwidth automotive oscilloscope..
  • ⚡【Support Different system】 Fit for the portable computers, table PC, and suitable for wild mobile use and business trip use. Support WIN10/ WIN8/WIN7 etc..
  • ⚡【USB 2.0 Interface】 USB 2.0 interface plug and play, and no need extra power supply.
  • ⚡【20 Kinds of automatic measurement】 Great function, More than 20 kinds of automatic measurement function, PASS/FAIL Check function. Resourceful trigger function, dynamic cursor tracking, waveform record and replay function..
  • ⚡【After-Sales Service】This is a professional instrument, if you need technical support, please feel free to contact us, we will reply you and solve your problem within 24 hours. If it is a product problem, we provide free return goods service, use too long time, need to return to China, we also support the exchange of new services!Any problem,please give us a chance to help you first!!!.
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Power Adapter Assembled Finished Machine Q15001 White

  • ASSEMBLED FINISHED - ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can....
  • UPGRADED VERSION - The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others. It reaches....
  • HAND-HELD - This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET - You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe with Power Supply, (Assembled Finished Machine) EM001

  • 【SIMPLE DESIGN】ETEPOPN EM001 oscilloscope kit is an assembled finished machine that can be used directly to avoid assembly/soldering process problems and saving you a lot of time. The display and MCU are mounted on the same board (motherboard) to avoid the use of inter-board pinouts. The analog channels are placed on a separate board containing most user-installed parts, thus allowing better separation of analog and digital circuits..
  • 【UPGRADED VERSION】The sensitivity of the EM001 oscilloscopes has been extended both in width and height which is wider and higher than the others It reaches 5mV / div – 20V / div while the others is only 10mV / div – 5v / div..
  • 【HAND-HELD】This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop..
  • 【ROTARY ENCODER】It has been added the rotary encoder makes parameter adjustment more quicker and easier..
  • 【WHAT YOU GET】You will get an assembled mini oscilloscope, BNC clip cable, and a power supply. Detailed operating instructions (troubleshooting guide) and schematics are also provided. If you have any questions about this digital oscilloscope, you can always contact us and we will reply within 24 hours..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED – ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can be used directly to avoid assembling/welding process problems and greatly save your time..
  • UPGRADED VERSION – The sensitivity of the EM001 has been extended both in width and height, which is wider and higher than the others. It reaches 5mV/div – 20V/div, while the others is only 10mV/div – 5v/div..
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and schematic are also provided..
Check Stock

Mivofun Mini USB Digital Oscilloscope 5012H 2.4 IPS LCD 500MS/s Sampling Rate 100MHz Bandwidth Support Waveform Storage Professional Handheld Oscilloscope Kit with Protective Case

  • It is widely applicable inacademic experiment, electronicsmaintenance, electronic engineering tasks, etc..
  • Only 1 button with Touch area, operated with the gestures of one-click, double-click, press and slide。.
  • Equipped with 320*240 color display, 8M Memory Card (U Disk), and chargeable Lithium batteries。.
  • This pocket size oscilloscope is a 2-channel digital oscilloscope.
  • It supports SD card USB flash disk storage and USB charging.
Check Stock

LCD Handheld Digital Oscilloscope Kit - 138 Pro 2.4"TFT Mini Automotive Oscilloscope 200Khz Digital Oscilloscopes Portable 2.5Ms/s Sampling Rate, 80khz Pwm, Trigger Function Auto/Nomal/Single

  • Faster Sampling Speed: Digital oscilloscope has a real-time sampling rate of 2.5MS/s, a bandwidth of 200KHz, 80KHz Pwm,and a complete trigger function (single, normal, automatic). Equipped with efficient one-key AUTO, the measured waveform can be displayed without tedious adjustment. It can be used freely for both periodic analog signals and aperiodic digital signals, and can measure voltages up to ±400V.
  • More Powerful Detection Range: A cost-effective handheld oscilloscope for people in the maintenance industry and R&D education industry. The highly practical oscilloscope can meet your daily testing needs.
  • Clearer Lcd Display: Portable oscilloscope is equipped with a 2.4-inch high-definition LCD screen with a resolution of 320*240, which is small in size and has strong anti-overload capability.
  • Longer Battery Life: Automotive oscilloscope has a built-in 1000mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. At the same time, it is equipped with a type-c charging cable, which can also be used while charging, which is very convenient.
Check Stock

OWON HDS242 Oscilloscope 2 in 1 Universal Test Instrument, Professional LCD Display Screen Mini Handheld Digital PC Oscilloscope,20000 Counts Digital Multimeter, with Lithium Battery(40 MHz + 2CH)

  • ✨[20000 Counts Digital Multimeter ]: Digital multimeter be used to measure AC/DC voltage/current, resistance,diode,capacitance,on-off test. High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry..
  • ✨[Small Size & Powerful Function]: Mobile phone body,Oscilloscope, Digital Multimeter multifunction in one.3.5-inch high-resolution,high-contrast color LCD display,suitable for outdoor use..
  • ✨[Great Power Management]: Ultra-low comprehensive power consumption less than 3W.Powered by 4400mAh lithium battery.The lithium battery may not be fully charged when delivered. To make the battery fully charged, it takes up to 4.5 hours (when the device is turned off) or it is subject to the charging indicator. After charging, the battery can supply power for about 6 hours..
  • ✨[Excellent Oscilloscope Performance]: OWON Handheld Oscilloscope have two acquisition modes,high refresh,deep storage,7 kinds of auto measurement,cursor measurement function and save function..
  • ✨[USB Type-C Interface]: Type-C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.OWON Oscilloscope can be charged by an adapter or a power bank, and supports PC software connecti....
Check Stock