ReviewsUsb To Ide Adapter

StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader 35BAYCF2IDE

Connect a CF card to a computer through an IDE connector.
Compatible with compact flash memory cards and desktop computers with an IDE slot.
Compact flash IDE adapter / CF to IDE adapter / CF to IDE converter / IDE to CF card reader.
Quick and driver free installation into any IDE 40 pin and 44 pin slot.

IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the laptop or desktop which have SATA connector..
Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..

IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the....
Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..

COMPLIANCE WITH STANDARDS£ºSD to IDE adapter is compliance with standards: Memory card specification Ver2.0, IDE/ATA?33 specification. Products that meet the specifications are very suitable for your use..
STANDARD IDE INTERFACE£º44Pin male adapter hard disk adapter adopts standard IDE interface, true IDE mode, and supports DMA-33 transmission mode. The IDE interface is a 44-pin/2.0 mm male connector. This product is convenient for you to use..
TWO MAIN CONTROL CHIPS£ºThere are two main control chips on this board, and there is a memory card socket on the back. Advantages: small footprint, compact design and simple operation..
SYSTEM SUPPORTABLE£ºThe memory card can be included with the OS and application software, and the device can be directly activated.
Supporting DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / OSX / Linux systems..
SPECIALLY DESIGNED£ºSmall memory card to IDE memory card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable ....

One 22 Pin male SATA connector，One 44-Pin standard female IDE connector..
IDE to SATA Adapter. The 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE....
Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives..

External hard Drive Reader: support 2.5/3.5 SATA HDD and SSD, 2.5 /3.5 IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive, dual-head IDE....
Widely Compatibility: This USB 3.0 to IDE and SATA adapter allow to operate 3 HDDs simultaneously, It is compatible with 2.5"/3. 5" Ide/SATA hard....
High speed transfer: data transfer up to 5Gbps. Backward compatible with USB 2.0/1.1..
Support system: Windows XP/Vista/7/8/10(32bit and 64bit).
Linux,Mac OS 10. X (OTB mode isn't applicable for W8 and Mac).
on/off switch for HDD protection. Led light shows power and activity status..

Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.

Universal SATA/IDE Hard Drive Adapter: It can support 2.5 "/3.5" SATA I/II/III Hard Drive and 2.5'' SATA SSD.
Super Speed USB 3.0: USB 3.0 supports transfer rates of up to 5Gbps(The actual transmission speed is limited by the setting of the device....
Pulg & Play: Support Plug and play & hot swap, On/Off power Switch for Hard drives protection. Tips: Some IDE hard drive is old, you need to set....
System Compatibility: Support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux etc. Support devices PS4/Xbox/TV/monitoring equipment..
Customer Focus: Our goal is to give you a 100% satisfaction shopping experience, so we provide 18 months warranty.

One Female SATA 7+15pin port, one 3.5Male PATA port (40-pin IDE), and one 4-pin Molex power connection Adapter.
SATA Female to 40 pin Male 3.5 inch IDE Adapter allows you convert hard drive interfaces to work with newer/older systems..
Converts Parallel ATA(PATA, ATA, IDE) to Serial ATA (SATA) Converts SATA to PATA/ATA/IDE/EIDE..
Package: Sata to Pata Interface Adapter x1..

Turn a 2.5” SATA III or IDE HDD / SSD into an external hard drive that connects to your computer through USB 3.0 with UASP.
Works with USB 3.0 computers such as Ultrabooks, Macbooks and desktop computers and 2.5in IDE or SATA HDDs & SSDs such as Samsung 840 EVO.
2.5" hard drive enclosure / SATA 2.5 hard drive enclosure.
IDE HDD or SSD enclosure / USB to IDE enclosure / 2.5 inch enclosure.
Turn an unused IDE or SATA drive into additional external storage.

SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive 2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
Works with all SATA Drives up to 500GB Supports IDE 66/100/133MB/s.
No need for an extra power supply. 44 Pin IDE connector powers the Drive no other cables or adapters are needed. No driver needed, plug and play,....
Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Adapter is good for up grading an old....
Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..