ReviewsUsb Z Wave Controller

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

  • 4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
  • FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
  • Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
  • MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
  • MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....
Check Stock

ZRC-90US, BW8510US, by Remotec, Cert ID: ZC10-15100007

  • ...AL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing..
  • EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. Backed by a 5-year warranty..
Check Stock

Z-Wave Plus Smart Light Dimmer Plug Built-in Zwave Repeater/Range Extender Zwave Hub Required Works with SmartThings Wink- ZW39

  • Hassle-free Operation: Plug the smart outlet in, can control and dim your lights from anywhere, schedule a timed event or create a custom scene from....
  • Adjust brightness level from 10-100%: Manual & Remote Control,come on or turn off via a schedule, cuts energy costs and extends bulb life.
  • Plug and Play: The wall plug adds to your Z-Wave hub in minutes. Z-Wave Plus dim control for 120V light devices, max loading 500W.
  • Works with Alexa for voice control (Alexa device and hub sold separately). Compatible with the following Z-Wave certified Hubs: SmartThings, Wink,....
  • Once plugged in, the Wall Plug acts as a signal repeater that boosts connectivity between hub and devices. NOTE: Z-Wave gateway controller....
Check Stock

Kryolan Tear Stick Art 3005 4 grams.

  • A USB stick that houses both a Z-Wave and Zigbee radio..
  • Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 6.51.06.
Check Stock

Wireless Z-Wave Multi-Input/Output Dry Contact Bridge Cert ID ZC08-16040002

  • BEFORE YOU BUY: Check to make sure your home automation controller / security panel is interoperable with our device. NOT ALL Z-wave Controllers are....
  • One 24VDC / 110 VAC Relay to control any low voltage device via Z-wave. Controls garage doors, motorized shades, gates, solenoid valves, etc. Relay....
  • One SIGNAL Input terminal block to receive low voltage (digital, analog, or pulse) signals via Z-wave. Use with reed sensors, contact sensors, door....
  • 9V AC power adaptor included. Low voltage wire is NOT included.
  • Please visit our website and youtube page for application details and how-to video's. Wiring diagrams are also downloadable on our website product....
Check Stock

Z-Wave Smart On/Off Light and Appliance Plug, Dual Outlet Plug-in, 1 Alway-On+ 1 Smart, Built-in Zwave Repeater, Zwave Hub Required, Works with SmartThings, Wink

  • Hassle-free Operation-Plug the smart outlet in, control lights from anywhere, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day..
  • Two Outlet-This outlet contains 1 Always-On outlet+1 Z-wave outlet, which is more flexible and convenient to use..
  • Plug and Play-No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. The wall plug adds to your Z-Wave hub in minutes..
  • Voice Control-Works with Alexa for voice control (Alexa device and hub sold separately). Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris..
  • Once plugged in, the Wall Plug acts as a signal repeater that strengthens Z-Wave signals and boosts connectivity between hub and devices. NOTE: Z-Wave gateway controller required- sold separately..
Check Stock

Zooz Z-Wave Plus S2 Double Plug ZEN25, 2 Outlets, 1 USB Port

  • 2 SMART OUTLETS: Control 2 outlets individually or at once from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Z-Wave alarm panels like ADT, Ring, or Alarm.com. Custom handler required for SmartThings, contact seller for details..
  • POWER MONITOR: Track energy of connected devices for smarter power management. Schedule automatic shut-off times and restore status after power failure. NO ENERGY MONITORING OR ADVANCED SETTINGS ON WINK!.
  • USB PORT: Charge your tablet or headphones and get on/off (charging/charged) reports to your email or phone (NO Z-Wave control, reports only, turn off the device while charging for best results)..
  • SIMPLE SET-UP: Just plug it in to a standard receptacle. The extra compact design allows you to fit 2 Double Plugs in the same receptacle! Go to Zooz support website for step-by-step instructions how to add and use the Double Plug with your Z-Wave hub..
  • CERTIFIED: This device features overload protection and has been confirmed by ETL labs to comply with North American safety standards. It's equipped with the latest S2 smart security (your hub needs to support S2 too) and Z-Wave Plus 500 chip to offer longer range and faster communication speed..
Check Stock

Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required

  • ...AL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing..
  • EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. Backed by a 5-year warranty..
Check Stock

Zooz Z-Wave Plus S2 Motion Sensor ZSE18 with Magnetic Mount, Works with Vera and SmartThings

  • EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways..
  • 2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB..
  • FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning..
  • CERTIFIED SECURE: Uses the latest S2 Z-Wave protocol and AES-128 signal encryption. Z-Wave Plus chip for longer range and increased battery life..
Check Stock

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do....
Check Stock

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock