ReviewsUsed Truck Cr

FASTROHY 2Pcs MR-9 Battery Adapter Replacement for Film Camera and Exposure Meter MR9 PX625 PX13

  • ★High Quality: Tested under Strict Quality Control Standards. CE and ROHS Certified. Grade A cells CR2032 Ensure Longer Battery Life and Long Lasting Power.
  • ★Get the Exact Fresh CR2032 Battery, Have Full 3 Volts Charge, 3 Years Shelf Life.
  • ★Primarily used in Watches, Computer motherboards, Calculators, PDAs, Electronic organizers, Garage door openers, Toys, Games, MP3 players, Digital voice recorders, Door chimes, Pet collars, LED lights, Sporting goods, Pedometers, Calorie counters, Stopwatches, Glucometers, Medical devices, and more.
  • ★If your device uses any of the following batteries, this is what you are looking for.:Energizer CR2032，CR2032BP，DL2032，ECR2032，KCR2032，BR2032，LM2032,5004LC，5004LB，L14，SB-T15，EA2032C，EA-2032C，L2032,2032，DJ2032，KL2032，E- CR2032，KECR2032，GPCR2032，KT-CR2032.
  • ★What You Get: 10PCS CR2032 Batteries in Exact Blister Pack.
Check Stock

ECR2032 3V Lithium Coin Cell Battery CR2032 (100 Pack)

  • ★Guaranteed for 3 years in Storage: MJKAA Brand Lithium Coin batteries are guaranteed for 3 years in storage..
  • ★High Quality: Tested under Strict Quality Control Standards. CE and ROHS Certified. Grade A cells CR2032 Ensure Longer Battery Life and Long Lasting Power.
  • ★Primarily used in Watches, Computer motherboards, Calculators, PDAs, Electronic organizers, Garage door openers, Toys, Games, MP3 players, Digital voice recorders, Door chimes, Pet collars, LED lights, Sporting goods, Pedometers, Calorie counters, Stopwatches, Glucometers, Medical devices, and more.
  • ★If your device uses any of the following batteries, this is what you are looking for.:Energizer CR2032，CR2032BP，DL2032，ECR2032，KCR2032，BR2032，LM2032,5004LC，5004LB，L14，SB-T15，EA2032C，EA-2032C，L2032,2032，DJ2032，KL2032，E- CR2032，KECR2032，GPCR2032，KT-CR2032.
  • ★What You Get: 100Pcs CR2032 Batteries in bulk. 2032 3V coin batteries provide reliable, long lasting power for your medical devices, security devices, electronics and more.
Check Stock

Tenergy 3V CR123A Lithium Battery, High Performance 1500mAh CR123A Cell Batteries PTC Protected for Cameras, Flashlight Replacement CR123A Batteries, 16-Pack (Non-Rechargeable)

  • High power - The Tenergy 3V Lithium CR123A batteries are best used for these common applications: photo equipment, camera equipment, smart sensors, light meters, security cameras, and much more. Make sure you are maximizing the most of your electronic devices ability by delivering the best power..
  • Long lasting - The Tenergy Lithium CR123A 3V one-time-use batteries have high energy density that will last 3-5 times longer than alkaline one-time-use batteries when using in high drain devices. **These are NON-rechargeable/one-time-use/disposable batteries. Please DO NOT recharge..
  • Replace and upgrade - This CR123A can replace the following models and sizing names: CR123, DL123A, K123A, EL123AP, VL123A, 5018LC, and CR17345. Dimensions: 17 mm (diameter) x 34.5 mm (length).
  • ENHANCED PROTECTION- The Tenergy 3V CR123A Cell Batteries are UL, UN, ROHS certified. Tenergy CR123A battery incorporates PTC (pressure, temperature, current) protection..
  • Better value - Buy in bulk and save! Replace other household CR123A batteries and make Tenergy the new standard with this bulk deal of a 40 count CR123A battery pack..
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • ...Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years, Great for use with any Creality 3D printer..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Streamlight 85177 CR123A Lithium Batteries, 12-Pack

  • Pack of 12 Streamlight Lithium CR123A batteries.
  • Not recommended for Arlo security cameras and these batteries are NOT rechargeable.
  • Length 1.36" (34.5 millimeter), diameter 0.67" (17 millimeter).
  • Note: These batteries can be used in flashlights, film and digital cameras, and any other device that uses the following battery models: 123A, CR123A, CR123, CR17345, K123A, VL123A, DL123A,5018LC, EL123AP, SF123, and SF123A 3V.
  • These are the replacement battery of choice for all Streamlight flashlights that use disposable lithium batteries.
Check Stock

2-Pack Brass Transmitters for TireMinder TPMS TMG400C TM66 and A1A

  • Extra TireMinder Transmitter for TireMinder A1A, TM66 and TMG400C TPMS.
  • TPMS for RV, Trailer, MotorHome, Truck, Car or Any Other Vehicle with Brass (Rubber) or Steel Valve Stems.
  • Replaceable Battery with 9-14 Month Lifespan (CR1632).
  • Small, Light, and Out of the Way (0.5 OZ).
Check Stock

CR2450 3V Lithium Button Cell Battery for Dive Computer,Flameless Candles Thermometer(10pc/2cards)

  • Application:welding hood，truck key，security sensor，wireless thermometers.sensor,alarm system sensors,garage door remote,Learning Watch,Flameless Candles,tealight candles, Clocks, Watches, Calculators, Dive Computer，Car Key Remote，Security System.
Check Stock

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

  • Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
  • Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
  • Precise Detection: Blue LED indicates normal filament feed-in.
  • Blue LED turns off when filament runs out..
  • IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
  • Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

VESSEL® MEGADORA™ Screwdriver No.900 +2x100 JIS 900P2100J

  • ☞ High-end handle design, slip resistant grip reduces hand fatigue.
  • ☞ Four sizes of bits : PH2 CR-V 1/4 and PH1 CR-V 3/16 T15 CR-V T20 and T25 CR-V T30.
  • ☞ Suitable for home, auto repair, outdoor and other working occasions without additional screwdriver, a group of 8 in 1 screwdriver solve all your troubles.
  • ☞ High-end steel is used, the drill bit after precision processing and heat treatment is more rigid and durable.
  • ☞ Easy to carry out outdoor use, give men the best tool gifts.
Check Stock