ReviewsV band Hose Clamp

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • Why Non-Stripping: Our hose clamp band material is thick and non-perforated. The other typical 1" hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. Our screws are much bigger and with deeper threads that grip the embossed band tightly. The buckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of ....
Check Stock

EVIL ENERGY 3.0 Inch Stainless Steel Exhaust V Band Clamp Quick Release Mild Steel Flat Flange

  • Application: V band clamp work very well in operating conditions involving stress, vibration and extreme temperature fluctuations,such as exhaust....
  • DESIGN:Each assembly consists of two mild steel flat flanges and one 304 stainless steel v-band clamp,providing a perfect overlap seam for welding.The....
  • ADVANTAGE:One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal. They provide....
  • ADVISE : You can use a drop of anti-seize on the clamp’s retaining nut. This helps extend the life of the clamp and protects the ability of the....
  • The 3.0" V band clamp have 3-month warranty.No instruction included, Professional installation is highly recommended.We value your shopping experience....
Check Stock

TAISHER 10PCS Brass Hose Barb Fittings 3/8 Inch to 1/4 Inch Barb Hose, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel with 20PCS Hose Clamp

  • [ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel..
  • [ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose..
  • [ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F..
  • [Function] Used to connect hoses of different diameters. The hose barb can be firmly connected to the hose, and the hose clamp can form a tight seal on the flexible or semi-rigid hose..
Check Stock

STEELSOFT DIY Hose Clamp System Kit, 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Band Clamp Pipe Clamp Screw Clamp Metal Hose Clamp Large Adjustable for Ductwork, Pole Mount, Metal Strapping

  • DIY Hose Clamp: Nothing like the freedom to determine your own screw clamp sizes and still have enough material left, come in handy for other future projects. Trim the strap in suitable length, insert the fasteners and get small or large hose clamp options from 2.5'' to 37''max diameter..
  • Super Easy To Use: In our 2nd image, you can read the diagram manual! Only a snip/plier and a screwdriver needed. If you have no a snip on hand, please use a plier to bend the strap up and down repeatedly, it will be cut easily! Make an adjustable hose clamp as you want!.
  • Cost Effective: Our hose clamp kit makes it much more cost effective and flexible than ordering a variety of pre-made worm clamps. You can make band hose clamps in odd sizes such as 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch and so on. Round and polygonal shapes are all available..
  • Smooth Worm Gear Clamp: Our fastener steel is thicker than competitions, which is not easily bent when making the hose clamp tight! We used the best quality screws which can grip the strap band tightly and keep smooth driving when turning the screwdriver! There is no hard pressure to apply!.
  • All 304 Stainless Hose Clamps: The strap roll 9.8 FT and 6 PCS fasteners are all made of real 304 SS, not 2....
Check Stock

304 Stainless Steel Hose Clamp Assortment Kit DIY Cut-To-Fit 12 FT Metal Strap + 8 Stronger Fasteners Large Adjustable Worm Gear Band Hose Clamps Screw Clamps Duct Pipe Metal Clamp Strapping

  • DIY Hose Clamps: Our hose clamp assortment is an awesome kit for you to determine your own size of worm clamps. Anytime to get odd sizes 2.5'' or extra large 45'' which are rare to find in the local stores..
  • Super Easy To Use: In our second image or package, you could please read the instructions. 30 seconds to 1 minute fast setup! If you do not have a snip on hand, DON'T WORRY! Please use a plier to bend the metal hose clamp strap back and forth, it will be cut easily. A nut driver for our screw clamp with 5/16'' hex head is available..
  • Cost Effective: No longer need to stock different sizes of pre-made stainless hose clamps. It is more flexible to make hose clamp large as 14 inch 16 inch 18 inch 20 inch 24 inch 30 inch 40 inch! The standby materials come in handy for future projects!.
  • Hose Clamps Stainless Steel: 12 FT strap and 8 PCS fasteners are all made of high quality 304 stainless steel, NOT 201 SS. These worm gear clamps will last forever, reusable, anti-rust and anti-corrosive, very suitable for outdoor use!.
  • No Jamming No Slipping Fasteners: The steel sheet of our hose clamp fasteners is thicker! It keeps the stainless strapping strong and heavy duty. The screw grips the strap band tightly so that the band clamp can be tightened! The worm driv....
Check Stock

3 Inch V Band Clamp CNC Stainless Steel Flanges 3in SS Vband V-Band Flange Kit

  • 1️⃣ 3 Inch V Band Clamp with CNC Stainless Steel Flanges，Complete V-band kit, offer effective fastening solutions, remove intercooler systems....
  • 2️⃣This kit is specifically designed for 3" exhaust pipes.Good stainless, thick enough to not warp without a million tacks. Male/ female means no....
  • 3️⃣ One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal. They provide....
  • 4️⃣This complete 3inch Vband kit includes 1x 3" V-Band clamp (3.25" outer diameter) which is designed to accommodate the 2x stainless steel 3"....
  • 5️⃣The 3.0" v band clamp have 3-month warranty.No instruction included, Professional installation is highly recommended.We value your shopping....
Check Stock

Hose Clamps, Stainless Steel Hose Clamp for 1/2 Inch to 1 Inch Hose Pipe Adjustable Worm Gear Hose Clamps Assortment for Automotive Plumbing, Fuel Line, Mechanical Application, 10 Pcs Hose Clamp Set

  • Sturdy & Durable --- Stainless Steel Hose Clamps made of 0.5mm thickness 304 stainless steel (including band, housing and screw). Hose clamp set have the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Pipe Clamp are reliable strong reusable and durable for long-term use..
  • Adjustable Hose Clamps --- The Worm drive Hose clamps are high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/2 inch to 1 inch (14mm-27mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc...
  • Easy To Install --- Hose clamp large has pre-assemble hose clamp fasteners, with through hole process design and slotted holes, steel belt through hole, tight locking and strong torsion force. Hose clips installation just need to use the hose clamp driver to loosen the screw(6mm Flat Head) of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are perfectly suitable for home, industrial, gardening, mechanical, electronic, boat, marine and more. Hose clamps metal are perfect for automotive, seal hoses, water pipe....
Check Stock

440Pcs 15 Sizes 6mm-20mm Spring Band Clamps for Water Pipe-Automotive Fuel Line-Silicone Vacuum Low Pressure Air Tube Clamp Fasteners Assortment Kit

  • 【15 Sizes】The spring band clamp have various sizes including 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 15 different sizes can meet your different needs..
  • 【High Quality】The spring band clamp is made of 65 Mn steel, strong and durable, corrosion-resistant for long time use..
  • 【Leak Proof】The fuel line hose clamp can ensure a reliable and leak-proof connection between the hose and the joint, and is very suitable for connecting the hose to the joint to prevent flow leakage..
  • 【Easy to Use】1. Prepare pliers and spring clips. 2. Press firmly on both ears to make the inner ring bigger. 3. Put the spring band clips on a suitable pipe. 4. Loosen the pilers, can be clamped..
  • 【Wide Application】The vacuum hose clamp is suitable for push mower, riding mower and snowmobiles, ideal for vacuum and low-pressure fuel lines etc..
Check Stock

yeesport Vise Grips Locking Pliers 3PC,Hose Clamp Pliers,Remover Kit with Long Reach Wire Spring Hose Clamp Pliers for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps

  • Professional Hose Clamp Pliers Set of 3: The is a set of 3 pairs of hose clamp pliers, including long reach wire spring hose clamp pliers, 45-degree angled hose clamp pliers, and flat band hose clamp pliers. The maximum opening sizes of these 3 pairs of pliers are 2.4in, 2.8in, and 0-2.2in, respectively, meeting different needs..
  • Rotatable Pliers Head & Spring Gear Lock: The pliers heads of the 45-degree angled clamp pliers and the flat band one can be flexibly rotated to handle hose clamps of various angles. The opening size of the pliers can be adjusted by the spring lock, and the gears are engaged to keep the opening, which is convenient and labor-saving..
  • Forged From Hardened Steel: Forged from steel with high hardness by hardening and black electroplating, the pliers heads are sturdy against rusting and corrosion. The spring clamping mouth is made of quality elastic material, which deforms under external force and returns to its original shape after removing the external force..
  • Comfortable Non-slip Rubber Handle: The handles adopt an ergonomic design, which will not slip during use, and the rubber covering makes them comfortable to hold so you won't feel your hands sore and fatigued easily, perfect for long-term work. Besides, the spring locking s....
Check Stock

ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps

  • Function: Precision clamps at the ends of flexible cables allow extensions where other models hose clamp pliers are not accessible, while heavy duty 24-inch flexible cables allow for use in any position. The hose pliers also have a locking mechanism that holds the clamp in the open position for easy removal and installation of the clamp..
  • Premium Quality: The hose clamp pliers are made of high quality material with extra sturdy carbon steel cable prevents twisting and breaking, the hose clamp removal hook set also has durable chromoly vanadium construction..
  • Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
  • Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
  • Package Included: The hose removal too....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock