ReviewsV band Quick Release Clamp

HOIGON 2 Pack Double Handle Corner Clamp, 90 Degree Right Angle Corner Clamp with Adjustable Swing Jaw Aluminum Alloy for Woodworking, Welding, Framing

  • RIGID - The double handle right angle clamp forged with thick aluminum alloy material, lightweight but practical to last, thus the double handle right angle clamp is easy to carry and use. Steel solid threaded screw rod is durable and not easy to break or bend..
  • QUICK RELEASE - 2 red quick-release buttons on both sides of corner clamp with quick release are metal-made, which is more durable than plastic one. Press down the button for quick setup and adjustments or instant release of workpieces..
  • EASY TO GRASP - With a maximum clamping range of 2.56 inches, our double handle corner clamp comes with anti-skid rubber handles and adjustable jaws for fast clamping wooden, glass, metal or plastic pieces together at 90 degrees..
  • WIDELY USES - 2-pack 90 degree right angle clamps are suitable for drilling, welding, framing, or doweling to make cabinets, boxes, photo frames, canvas frames, aquarium, etc. A gift for woodworkers, gardeners, mechanics, handymen and DIY'ers..
  • BUY WITH CONFIDENCE - After you receive the double handle right angle corner clamp. If you dislike or have any probl....
Check Stock

JDMSPEED New 3 V-Band Flange Clamp Kit With Ridge 4 Pcs Stainless Steel Replacement For Exhaust Downpipe 4

  • Packing Includes: 4X V-Band Clamp, 8X V-Band Flanges (Male/Female), As the picture shown.
  • Both of the flange has a machined ridge for the exhaust pipe to fit into for perfect and precise welding.
  • This V-band clamp makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes, etc. Great for racers....
  • No instruction included,Professional installation is highly recommended.
Check Stock

Steelman Pro Quickalign 6-Inch Pipe Clamp for Welding, Accommodates 2-6-Inch Pipes

  • Heavy-duty steel pipe clamp designed to join two pipes together for welding.
  • Quick-release button lets clamp quickly adjust to clamp to or release pipes.
  • T-handle provides easy rotation of the ACME threaded screw for quick adjustment.
  • Carrying handle provides additional control when adjusting the clamp diameter.
  • Three wing bolts provide contact points to fine-tune the fit of pipe segments.
Check Stock

NICEYRIG 15mm Shoulder Pad with Quick Release Baseplate for Manfrotto, 15mm Rod Clamp Applicable for Video Camcorder Camera DV/DC Support System DSLR Rig

  • The Camcorder Shoulder support kit is designed for poeple who keep long time shooting to help release pressure. The design of the 15mm shoulder pad integrates with ergonomics, which makes it very soft and comfortable. The shoulder pad improves stability on photographing. Plenty of room and holes for mounting balance weights, V-Mount batteries, etc. A great assisstant for you..
  • Quick release plate kit is mounted on 15mm shoulder pad with two 1/4 screw. Compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. So you could switch your shoulder-shoulder shooting to tripod shooting quickly..
  • There is off-rail prevention on the mounting baseplate, preventing QR plate from removal accidentally. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod clamp also is mounted on the shoulder plate for you adding to your video rig..
  • Made of aluminum alloy and sponge, lightweight and durable. Net weight: 17oz.
Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

  • The quick release plate is compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. Also could be mounted with camera or camera cage on the top. It is anti-skid designed..
  • There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
  • Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
  • Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw....
Check Stock

SMALLRIG Monitor Cage for Atomos Ninja V,Built-in NATO Rail and HDMI Cable Clamp Monitor Cage 2209

  • ???? Multiple Threaded Holes: SMALLRIG Ninja V Cage for Atomos mounts to the monitor by a 1/4’’-20 screw on the top and two M3 screws on the left side. Across the top and bottom the cage features multiple 1/4’’-20, 3/8’’-16 holes, and a locating mount point for ARRI on the base.
  • ???? Built-in NATO Rails: NATO rails are also provided along on both top and bottom to allow use with a range of SMALLRIG mounts such as SMALLRIG Ball Head Magic Arm 2071 or the 2072 for quick release.
  • ???? HDMI Cable Clamp: Includes a single HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4k 60p cables. If required, the cage supports the use of a second SMALLRIG HDMI Cable Clamp 1693 for the HDMI output. It is attached on the left to protect the HDMI cable and port.
  • ???? Drive Locks: For backwards compatibility with Atomos Master Caddy II, the cage also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the cage’s form factor.
  • ???? Attachment Points: SMALLRIG ninja v cage features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.
Check Stock

Quick Release Bolt, Bicycle Seatpost Clamp Bolt Quick Release Lever for Mountain Bike Road Bike ( Color : Silver )

  • PREMIUM MATERIAL: Quick Release Bolt is made of Aluminum alloy, this seatpost clamp lever is durable and sturdy..
  • UNIVERSAL FIT: Standard size suitable for all bicycles with hollow axles.
  • QUICK RELEASE: This Quick Release Bolt allows you to quickly and easily adjust the seat height without tools..
  • GREAT REPLACEMENT: This Seat Clamp Quick Release Lever is a simple replacement for your seat binder bolt..
  • GUARANTEE: If you have any problem with this product, you can just take advantage of our 180 days warranty. We will change or refund for any reason..
Check Stock

Dixon LS128 Stainless Steel 301 LS Style Quick Release Worm-Drive Clamp 1/2 Band Width 1-3/4 to 8-9/16 Hose OD Range

  • Type 301 stainless steel band helps provide resistance to corrosion, wear, and fatigue.
  • Worm gear mechanism for precise band adjustment.
  • Quick release screw swivels to lock or disengage the clamp.
Check Stock

Kreg K5 Pocket-Hole Jig

  • The new Kreg Jig K5 is packed with features your are sure to appreciate.
  • It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts.
  • The quick-release Drill Guide Block makes set up simple.
  • Front-mounted clamp handle makes clamping easy.
  • Ratcheting clamp mechanism adjusts without tools.
  • Quick-release pin holds drill block in place, and can't get lost.
  • Storage Wings provide built-in storage for bits, screws, accessories.
  • Stop-Collar Setting Block makes drill bit setup easyDescriptionThe New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet..
Check Stock

Dixon LS72 Stainless Steel 301 LS Style Quick Release Worm-Drive Clamp 1/2 Band Width 2 to 5 Hose OD Range Pack of 10

  • Type 301 stainless steel band helps provide resistance to corrosion, wear, and fatigue.
  • Worm gear mechanism for precise band adjustment.
  • Quick release screw swivels to lock or disengage the clamp.
Check Stock

Dixon Valve & Coupling LSS248 Stainless Steel 301 LSS Style Quick Release Worm-Drive Clamp 1/2 Band Width 10-3/4 to 16 Hose OD Range

  • Type 301 stainless steel band helps provide resistance to corrosion, wear, and fatigue.
  • Worm gear mechanism for precise band adjustment.
  • Quick release screw swivels to lock or disengage the clamp.
Check Stock