ReviewsVacuum Extruding Machinery

2-1/2 x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

20 Pieces 5 Inch Cars Microfiber Wax Foam Applicator Pads,Microfiber Round Sponge Detailing Cleaning Pads Car Wax Applicator Pads Polish Microfiber Foam Sponge for Cars,Yellow Green Blue Dark Blue

  • Soft and durable material: the round sponge cleaning pads are made of microfiber and sponge, which has good softness, absorbency, longevity, and strong decontamination, washable and reusable, can last for a long time use.
  • Features: after the sponge absorbs water, the sponge holes can absorb dust and particles by extruding, and will not directly scratch the body surface, safe for hard surface, plastic, rubber, leather, vinyl, paint, transparent coating and more.
  • Size information: each microfiber round sponge measures approx. 13 cm/ 5 inches in diameter and 2 cm/ 0.8 inch in thickness, proper and compact size for your use, lightweight and convenient for you to carry or store.
  • Wide application: the microfiber sponge wax applicator can be applied to waxes, polishes, sealants, creams, dressings, conditioners and glazes, etc., multi-purpose sponge is not only suitable for cleaning, waxing, dusting and polishing vehicles, interior cleaning, leather seat cleaning, can also be applied as household cleaning tool.
Check Stock

Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery

  • ...any of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums..
  • This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more..
  • Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision..
  • Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64” OD a....
Check Stock

ZKGRAND CNC Dust Shoe,80mm 3.15in ,White

  • This product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly eliminate sawdust and dirt, so as to keep the worktable clean and tidy..
  • Spindle diameter: 80mm / 3.15 inch, vacuum port: 97mm / 3.82 inch,Please confirm the diameter of your router before choosing..
  • The assembly and installation of this product is very simple, and it is easier to replace the drill bit..
  • The brush is easy to disassembly and replace when worn..
Check Stock

CNC Engraving Machine Dust Shoe For 70mm Spindle

  • Spindle diameter: 70mm / 2.75inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router....
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

CNC Engraving Machine Dust Shoe For 85mm Spindle

  • Spindle diameter: 85mm / 3.35inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router before choosing..
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

CNC Engraving Machine Dust Shoe For 100mm Spindle

  • Spindle diameter: 100mm / 3.94inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router before choosing..
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

Red Devil 3986 Skeleton Caulk Gun Thrust Ratio 10:1

  • 10:1 THRUST RATIO: Ideal for extruding light to medium viscosity materials.
  • UNI RAIL CONSTRUCTION: Provides durability and lays flat for space savings.
  • HEX PISTON ROD: Extrudes material smoothly.
  • PUSH RELEASE LEVER: Offers quick stopping of material flow.
  • COMPATIBLE WITH STANDARD SIZE CARTRIDGES: Use with standard size caulk or adhesive tubes.
Check Stock

Make Fidget Cube 3D Pen

  • 3D handle - a unique device, with which it became possible to draw in three planes!.
  • Create unique 3D images, by means of extruding heated plastic!.
  • The result is a full-length volumetric toy, the shape that you gave it!.
  • Now all these features can appear in your phone and be always at hand!.
Check Stock

Anti-Rotation Bracket 0

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Philips Kitchen Appliances Noodle HR2357/05 Retail Box Packaging, Pasta Maker Plus, One Size

  • With powerful and automatic mixing, kneading and extruding, the Philips pasta maker allows you to make a pound of fresh pasta or noodles within 10 minutes!. Cord length : 40 Inches.
Check Stock