ReviewsVacuum Hose Fittings

BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/Case

  • Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
  • Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
  • Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters（R410a）, 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
  • Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
  • 【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..
Check Stock

Ritchie/Yellow Jacket 49967 - 4-V R410A/404A/22 HAV-60

  • Fourth hose to enable connection to hi-/lo-sides, refrigerant tank and recovery unit or vacuum pump for diagnostics, evacuation and charging without switching hoses.
  • 3/8" vacuum port for use with larger hose to cut evacuation time by up to 33 percent (all other fittings are 1/4").
  • Front access for easy field recalibration.
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck

  • ... to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. 21" metal hook, 23" transparent bleeder hose and 60" refill hose are included..
  • HAND PUMP LEAK DETECTOR AND THERMOMETER: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Stainless steel thermometer with index range 0 to 200℃ (32 to 400℉). American & European styles air plugs are included for you to choose. Customized blow molding case keeps everything in place and protects the gauges during storage..
  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund wi....
Check Stock

Makita 565056-5 Power Supply Cord

  • ...lying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting.
  • Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
  • Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric.
  • The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½" vacuum connection.
  • Expanded version of Cen-Tec's popular 94192 dust collection hose with additional ¾”, 1-1/4” power tool adapters, and additional 2 ½" shop vacuum adapter.
Check Stock

LeLuv Male-to-Male Quick-Release Fitting with O-Ring Single for Vacuum Pumps - Black

  • Barbed male-to-male 1/4 inch O-ring Fitting for hose-to-valve.
  • Made with medical grade nylon and nitrile o-ring. Mates to specifically-designed female fittings.
  • For use with 1/4 Inch (6.35 mm) inside diameter hose.
  • Allows you to maintain vacuum within the cylinder/cup when disconnected.
  • Specially design to fit LeLuv/Eyro brand cylinders and fittings with 100% guarantee. We do not guarantee that the item(s) will fit any other brands..
Check Stock

LeLuv Male-to-Male Quick-Release Fitting with O-Ring Single for Vacuum Pumps - Blue

  • Barbed male-to-male 1/4 inch O-ring Fitting for hose-to-valve.
  • Made with medical grade nylon and nitrile o-ring. Mates to specifically-designed female fittings.
  • For use with 1/4 Inch (6.35 mm) inside diameter hose.
  • Allows you to maintain vacuum within the cylinder/cup when disconnected.
  • Specially design to fit LeLuv/Eyro brand cylinders and fittings with 100% guarantee. We do not guarantee that the item(s) will fit any other brands..
Check Stock

BACOENG 3 Gallon Stainless Steel Resin Trap Vacuum Degassing Chamber (3 Gallon/1.2 QT/2 QT Available)

  • Resin traps come complete with glycerin-filled vacuum gauge, fittings for use with 1/4" vacuum tubing,brass ball valve and instruction manual..
  • Capture excess resin and protect your pump! Measuring range of vacuum gauge：0-29.25inHg.
  • Unique Catch Port Design: An additional hose can be installed at the port inside the tank to facilitate accurate collection of resin..
  • 5 Feet Reinforced Vacuum Hosing Connect Directly To Vacuum Pump 1/4" SAE..
  • Silicone gasket to be used over 10,000 times without deterioration..
Check Stock

Manual Boost Controller Kit, Aluminum Material Adjustable Bilateral Turbo Tee Bleed Valve Manual Boost Controller Kit Universal for Car

  • Features many boost control capabilities found on the e-Boost2.
  • Two boost settings easily selected via the turn-and-push button.
  • External switch can be used to change between boost groups if required.
  • Supplied with e-Boost STREET control unit, wiring loom and installation kit, solenoid with mounting bracket and vacuum fittings, vacuum hose and hose clamps.
Check Stock

Shop Fox D4870 2-1/2\ Benchtop Tool Dust Collection Kit

  • Great for collecting dust from machines without built-in dust ports.
  • Includes: one dust hose, two vacuum hose end fittings, one rectangular nozzle, and one tapered nozzle.
  • Use the wide mouth nozzle to collect ambient fine dust.
  • Use the narrow tapered nozzle to collect heavier dust and wood chips.
Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

VacuMaid UV150GKP Extended Life Professional Wall Mounted Utility Vacuum with 50ft. Garage Kit Pro (Unit and Kit)

  • The UV150GKP is intended for one user to directly connect the hose to the vacuum. No plumbing required. Utility kit may be purchased separately to convert to multiple workstations..
  • The UV150GKP1 and UV150GKP3 are designed for one user to directly connect the hose to the vacuum or to plumb 1 or 3 additional utility valves, respectively, for multiple workstations. Pipe, wire, fittings, and glue must be purchased separately to plumb the vacuum for additional valves..
  • LONG LIFE WALL MOUNTED UTILITY VACUUM. This system with its long life motor can last 3x longer than most standards wall mount vacuums and shop vacuums. 1500 hour motor life..
  • MANUFACTURED IN THE USA by the 3rd generation of family-owned business, Lindsay Manufacturing, Inc., since 1956..
  • FREE LIFETIME TELEPHONE SUPPORT direct from the manufacturer. If you need help or have questions, we are available to assist during normal business hours..
Check Stock