ReviewsVacuum Relays

waveshare Raspberry Pi Power Relay Board Expansion Board Module Three Channel(3-ch) for Raspberry Pi A+/B+/2B/3B/3B+/4B Loads up to 250VAC/5A,30VDC/5A

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
High quality relays, loads up to 5A 250V AC or 5A 30V DC.
Photo coupling isolation, prevent interference from high voltage circuit.
Onboard LEDs for indicating relays status.
Relay control jumper, allows to control the relays by custom pins other than the default pins.

Check Stock

Nilight 90017C 3 Gang Aluminum Panel Toggle Dash 5 Pin On/Off Pre-Wired Rocker Switch Holder for Automotive Car Marine Boat, 2 Years Warranty

40A/30A High Switching Capability. These relays have a universal application and can be used in automotive setups, car sound systems, security systems, and various other applications..
Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87).
These Relays are Interchangeable/Compatible with: All automobiles and devices equipped with a 12-14 Volt DC power source.
Package includes: 10 pack electrical relays.

Check Stock

6 Way Blade Fuse Holder Box,12-Slot Relay Box with Spade Terminals and fuses,6PCS 4Pin 12V 40A relays for car Truck Trailer and Boat

6-way fuse box 6-relay holder with spade terminals and 6pcs fuse, 6PCS 4Pin 12V 40A relays(5PCS 4Pin 12V 40A Relays,1PC RTT7121 4-Pin 12V 40A relay).
Suitable for all marine, motor-home, automotive & motorsport applications..
Waterproof connector.Can be installed in circuit..
Can be fixed through 2 pre moulded holes on side..
Package Includes:1 Piece Relay Holder Box with fuses 4-pin relays and 36 Pieces Pins terminals..

Check Stock

Ingcool Compatible with Raspberry Pi Expansion Board Power Relay Module Kits for Raspberry Pi 4B/3B+/3B/2B/ A+/B+ 5A 250V AC/ 5A 30V DV

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
High quality relays, loads up to 5A 250V AC or 5A 30V DC.Photo coupling isolation, prevent interference from high voltage circuit.
Relay control jumper, allows to control the relays by custom pins other than the default pins.Onboard LEDs for indicating relays status.
Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835.

Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

Check Stock

MPC Emergency Manual Release Kit for Shaved Doors/Door Poppers

Built-in Relays - The new control module has built-in relays which eliminates 90% of wiring for a cleaner, faster, simplified installation. This system will shave AT LEAST an hour off the install time.
Single wire connections: No need to buy extra wire or make splice connections. Our new control module includes a wiring harness w/1 WIRE to run to each side of the vehicle & connect to the solenoid.
Programmable Safety Feature - To prevent accidents, our new control module automatically disables the door popper system if it sense that the vehicle is running.
Redesigned Remotes - Sleek two-button design w/a sliding cover to prevent accidental door opening while the remote is in your pockets. Press both buttons at the same time for optional trunk release!.
(2) Heavy-duty solenoids (45 lb. max pulling force), (2) chrome door poppers, RC receiver w/built-in relays per door, (2) 2-button 3 transmitters, (2) push buttons, steel linkage cable.

Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....

Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....

Check Stock

TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m.
width: 2.5mm), Suction Pump Size (length: 21cm)..
High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.

Check Stock

10 Pieces Refrigerator Starters QP2-4R7 4.7 Ohm 1 Pin Refrigerator PTC Starter Relays and 6750C-0005P Refrigerator Overload Protectors Refrigerator Parts Accessories

Package content: there are 5 pieces of 4.7 ohm 1-pin PTC starting relays and 5 pieces of 750C-0005P refrigerator overload protectors in the package,....
Compatible models: refrigerator overload protectors can effectively prevent the compressor in the refrigerator from overheating, they can be effective....
PTC starting relay: the PTC starter relay is a universal starter relay, applied in various brands of mini refrigerators and coolers.
Easy to install: the refrigerator start relays are durable, reliable and not easy to rust thanks to plastic and brass materials.
Wide applications: the 4.7 ohm 1-pin PTC start relays and 6750C-0005P refrigerator overload protectors are compatible with most mini refrigerators,....

Check Stock

HELLA H84709011 Mini\280\ Weatherproof Relay Connector Kit

Weatherproof Mini "280" relay connector kit..
Fits any automotive industry standard Mini "280" weatherproof relays regardless of manufacturer. Hella mating relays include 931410087, 931410082, 931410057, 931410917..
Kit includes plastic connector housing, external housing seal, (7) 6. 3 mm locking terminals, (6) various wire seals..
Package dimensions:5.91" (L) x 3.62" (W) x 1.94" (H).

Check Stock