ReviewsValve

20 Pack Tyre Valve Dust Caps for Car Motorbike Trucks Bike Bicycle Black

  • Tyre valve dust caps: valve caps can protect valve against exposure to dirt and dust.
  • Also can replace the original bad valve cap of the tyre.
  • Durable plastic material: the valve cap is made of good quality and durable plastic, dustproof and waterproof.
  • With detailed stripe design, convenient to grip.
  • Easy to install: dome shape and small, installation only need screws it onto tire valve stem.
  • It is easy to install or remove when you want to check air pressure.
  • Applications: each valve cap size is 13 x 10 mm/ 0.51 x 0.39 inch.
  • Universal size fits for most cars, bus trucks, SUVs, motorcycle and bikes with schrader valve.
  • Package includes: package contains 20 pack plastic valve caps.
  • Large quantity valve caps can meet your multi purpose need.
Check Stock

ATPEAM Overhead Valve Spring Compressor | Universal Automotive Engine Removal Repair Install Tool

  • The ATPEAM universal overhead valve spring compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many cars, vans, & light trucks.
  • Constructed of quality carbon steel for durability and longevity.
  • strong bearings provided to withstand high force to easily compress springs.
  • coated with zinc and black oxide, this valve compressor tool is resistant to rust and corrosion.
  • Easily remove valve springs in passenger and light commercial vehicles with this valve spring tool.
  • This compression tool works on foreign vehicles, domestic vehicles, and vehicles with dual springs and inner and outer springs.
  • Compressing springs can be difficult and dangerous, but this spring compressor features two different length jaws grips that easily attach to the valve spring for a secure hold on the part.
  • The overhead design allows you to easily attach the valve tool to your valve springs without having to take the cylinder head from the vehicle for quick removal and installation.
  • Package: 1 x Overhead Engine Valve Spring Compressor Tool.
Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

  • This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
  • Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
  • Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
  • The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
  • The valve spool has annular grooves to help center the valve in the bore..
Check Stock

Outus 20 Pack Tyre Valve Dust Caps for Car, Motorbike, Trucks, Bike, Bicycle (Green)

  • Tyre valve dust caps: valve caps can protect valve against exposure to dirt and dust.
  • Also can replace the original bad valve cap of the tyre.
  • Durable plastic material: the valve cap is made of good quality and durable plastic, dustproof and waterproof.
  • With detailed stripe design, convenient to grip.
  • Easy to install: dome shape and small, installation only need screws it onto tire valve stem.
  • It is easy to install or remove when you want to check air pressure.
  • Applications: each valve cap size is 13 x 10 mm/ 0.51 x 0.39 inch.
  • Universal size fits for most cars, bus trucks, SUVs, motorcycle and bikes with schrader valve.
  • Package includes: package contains 20 pack plastic valve caps.
  • Large quantity valve caps can meet your multi purpose need.
Check Stock

2pcs Presta Valve Caps, Oil Slick Stem Bolts, TC4 Titanium Alloy Bike Tire Valve Caps, Multicolor Mountain Road Bicycle Bike Valve Caps, Dust Covers for Inner Tube Gas Nozzle Bike Valve caps

  • [ Material ] Presta Valve Adaptors is made of TC4 titanium alloy. TC4 titanium alloy material, Vacuum nitride coating, flowing light and color. The valve cap not only can prevent leakage, but also prevent dirt and rain water into your bicycles..
  • [ Exquisite and Mini ] This gas nozzle valve cap is exquisite with mini size, lightweight and very useful. Removable valve core for easy inflation and addition of sealant. Universal Compatible.Good Airtightness. For Replaces Bad Presta Valve Cores..
  • [ Safe and Reliable ] Dimensional thread rolling, fully match your nozzle. Used to replaced the leak of the old valve make the Tire rejuvenation. Stop air leaks from old valves. Universal Compatible. Good airtightness. More durable, safe and reliable..
  • [ Color ] Colorful. The Bike Presta Valve Caps adopts a color design to make your bicycle look different and enhance the viewing of your bicycle..
  • [ Special Design ] TC4 titanium alloy Bike Presta Valve Adaptors, circular design, smooth and considerate. These Valve Stem Adapters are Suitable for Bicycles, Road Bikes, Folding Bikes and Most Mountain Bikes..
  • [ Exquisite and Mini ] This gas nozzle valve cap is exquisite with mini size, lightweight and very useful. Removable valve core for easy inflation and addition of....
Check Stock

Anodized Aluminum Alloy Bicycle Dust Covers Presta Tire Valve Caps and Copper Presta to Schrader Bike Valve Adaptor Tube Pump Air Compressor Tools Set Gold

  • Set: 4x Gold Aluminum Alloy Presta Valve Caps + 4x Yellow Copper Presta to Schrader Bicycle Bike Valve Adaptors.
  • Anodized Presta Valve Caps, Fits Mountain Bikes, Road Bikes, and Fixie bikes with Presta Valve Tubes.
  • Copper Presta valve to a Schrader valve ：suitable for varied types of bikes, including mountain bike, roadbike, folding bike, especially for mountain bikes.
  • Convert a Presta valve to a Schrader valve，Also turn a UK valve into a US valve Used with a Bicycle Pump or a Air Compressor.
  • Direct replacement,easy to install, only use the wrench to put the caps onto the tire valve stem, Size: Approx.1.5cm x 0.9cm x0.7cm.(L*Big head diameter*Small head diameter)..
Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
  • 【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
  • 【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

Beech Lane Upgraded Water Valve Kit 385311641 for Dometic Toilets 300, 310, and 320, Freeze Resistant, Increased Valve Lifespan, Ultrasonic Sealing Safeguards Against Leaks (Natural)

  • RE-ENGINEERED UPGRADED REPLACEMENT VALVE FOR DOMETIC 300 SERIES TOILETS- Stop breaking your back every year replacing your leaking toilet valve with another poorly design valve. This Beech Lane Patent Pending valve fixes the core issues which cause valve failure. Fits Dometic 300, 310, and 320 Series RV Toilets. Compare to Dometic Sanitation 385311641 Water Valve Kit F300/F310..
  • FREEZE RESISTANT TECHNOLOGY PREVENTS CRACKS- Features glass fiber reinforced polymer construction that is tested down to -22 Degrees F for crack resistance during freezing temperatures..
  • PATENT PENDING DESIGN INCREASES VALVE LIFESPAN - This Beech Lane valve features a Patent Pending design for increased valve longevity and prolonged function..
  • ROTARY SEAM MELTING COMPLETELY SEALS VALVE SEAMS- Engineered with a hexagonal inner structure to the cap to allow for complete seam sealing during production between cap and valve body with rotary melting..
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock