ReviewsValve Rocker

Powerbuilt Valve Spring Compressor Tool, Remove and Install Valve Springs and Retainers, Compressing, for 3/8 Inch and 7/17 Inch Studs - 940541

Simple effective and powerful tool for compressing high performance valve springs.
12" long handle offers plenty of leverage for compressing springs.
Stud mount for 3/8 and 7/16 inch rocker studs.

Ultimate street rocker designed for serious performance enthusiasts.
Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift.
Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift.
15 to 30 horsepower increase over stock rocker arms.
Use in any applications with less than 350 lbs. open spring pressure.

Ultimate street rocker designed for serious performance enthusiasts.
Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift.
Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift.
15 to 30 horsepower increase over stock rocker arms.
Use in any applications with less than 350 lbs. open spring pressure.

An oil tolerant, removable, medium strength, blue threadlocker.
Designed for the locking and sealing of threaded fasteners between 1/4" and 3/4".
Not only works on active metals but also on passive substrates such as stainless steel and plated surfaces.
Tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
Typical applications include Rocker studs, rocker adjustment bolts, bolts on valve and cam covers, oil pans, disc brake calipers, intakes and alternators, and pulley assemblies.

Includes 2 gaskets for both Rocker Cases. Replaces OEM 11061-2182 &11060-2332.
Our gaskets are the same material as OE but .02 mm thicker for better sealing. No more leaks!!.
Includes Valve Cover / Rocker Case Replaces OEM 11022-2068 & 11022-2056.
Fits Kawasaki 2500, 2510, 2520, 3000, 3010, 3020, 4000, 4010 Mules (1993-2016).
This product will ship FAST & FREE using Postal mail Service ONLY. Please include your post office box number if you do not receive mail at your....

NEW! REPLACEMENT FOR YAMAHA TIMBERWOLF 250 YFB250 2X4 / 4X4 CYLINDER HEAD ASSY 1992-2000.
THIS BRAND NEW AFTERMARKET KIT HAS BEEN INSPECTED FOR THE HIGHEST QUALITY & THE HIGHEST GRADE MATERIALS HAVE BEEN USED IN THE MANUFACTURE OF THIS KIT.
PURCHASE INCLUDES: CYLINDER HEAD ASSEMBLY. ( HEAD INCLUDES: EXHAUST & INLET VALVES, VALVE SPRINGS, CAMSHAFT, ROCKER ARMS, VALVE RETAINERS ). CAMSHAFT COVER. VALVE COVERS. CAMSHAFT PLATE. HEAD VENT TUBE. O-RING KIT. NUT, BOLT & WASHER KIT. NGK SPARK PLUG..
REPLACEMENT FOR OEM Part # 4BD-11101-03-00.

4.6L 5.4L 3V Rocker Arm with Valve Lifter Lash Adjuster Includes: 24 Rocker arm and 24 Lifter Lash Adjuster.
2005-2010 Ford Mustang -GT Models With 4.6L V8 Engines 2005-2010 Ford F-150 -With 4.6L V8 & 5.4L V8 Engines 2005-2014 Lincoln Navigator -With 5.4L V8 Engines.
2005-2010 Ford F-250 F-350 F-450 F-550 Super Duty -With 5.4L V8 & 6.8L V10 Engines 2006-2010 Ford Explorer -With 4.6L V8 Engines 2006-2010 Mercury Mountaineer -With 4.6L V8 Engines.
2007-2010 Ford Explorer Sport Trac -With 4.6L V8 Engines 2005-2014 Ford Expedition -With 5.4L V8 Engines.

【Cylinder Bore】: 47mm / Non-EGR Cylinder.
【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.

✅DESIGNED FOR compressing valve springs with the cylinder head on. Help to quickly and easily replaces valve springs.A must have for engine rebuild....
✅FITS 3/8 ” and 7/16” rocker studs.
✅Superior Material: HEAVY-DUTY STEEL 12” ensures high strength and durability, non-deformation, anti-corrosion, Impact resistance and aging....
✅Precise machining: Each part is manufactured to OEM specifications and precision-engineered..
✅5.100% SATISFACTION GUARANTEE:If you're not 100% satisfied with our items, simply return them for a full refund in 30 days. Support 12 months....

4.6L 5.4L 3V Rocker Arm with Valve Lifter Lash Adjuster Includes: 24 Rocker arm and 24 Lifter Lash Adjuster.
2005-2010 Ford Mustang -GT Models With 4.6L V8 Engines 2005-2010 Ford F-150 -With 4.6L V8 & 5.4L V8 Engines 2005-2014 Lincoln Navigator -With 5.4L V8 Engines.
2005-2010 Ford F-250 F-350 F-450 F-550 Super Duty -With 5.4L V8 & 6.8L V10 Engines 2006-2010 Ford Explorer -With 4.6L V8 Engines 2006-2010 Mercury Mountaineer -With 4.6L V8 Engines.
2007-2010 Ford Explorer Sport Trac -With 4.6L V8 Engines 2005-2014 Ford Expedition -With 5.4L V8 Engines.

2 Spools, A Spool (Controls Double Acting Cylinders), 12 Volt.
Momentary Rocker Switch includes a 3′ switch harness and 5′ extension valve harness for a total of 8′ between switch and valve allows for easy control with Mountable Switch Bracket.
All spools are double acting with spring return to neutral position, A spool is designed to control double acting cylinders, A and B ports are closed to Tank in neutral position.
Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI.