ReviewsValve Rod

Kweetle 2Gal Stainless Steel Pump Up Sprayer Reinforced Hose, Hand Pump Sprayer with Pressure Gauge&Safety Valve, Adjustable Nozzle Suitable for Gardening (2 Gallon)

【All Stainless Steel Structure】- Capacity: 2 Gal.
Pressure: 1.5-4.0 Bar. The 1.5Gal Stainless Steel Sprayer pump, box, cover, rod, pump handle and rod handle are all made of durable stainless steel. Braided durable hose， high quality – with viton seals and gaskets.
【HAND-PUMPED SPRAYER】- This sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.adjustable spray is perfect for misting.
【WIDE-MOUTH WATER INLET】- This sprayer boasts valve and pressure gauge that can provide convenience and ensure safety.Large Wide Mouth opening allows for easy filling and cleaning and less spilling.
【EQUIPPED WITH PRESSURE RELIEF PROTECTION VALVE】-The bleach sprayer can be in the case of too much air will automatically vent pressure relief, can avoid the risk of pot burst due to the pressure is too large， Built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture, commerce and medicine.
【WIDE APPLICATION】- Our handheld stainless steel sprayer is ideal for gardening, lawn, yard, indoor and outdoor spraying needs, automotive, general cleaning, pet bathing.

Check Stock

QWORK Stainless Steel Floating Ball Float Valves 1/2 inch DN15 Adjustable Male Thread Water Float Sensor Hydraulics, Pneumatics & Plumbingall

Float valves use a rod and float ball attached to a valve shutoff lever to control.
Floating Ball Material: 304 Stainless Steel.
Designed with G1/2 inch thread that is normally used, can fit many pipe connection.
This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes sure no leaking.
Widely used in magnetic level switch and liquid level measurements.

Check Stock

COMP Cams 159 Engine Break-In Oil Additive, 12 oz. Bottle

Improves surface mating of rotating assembly, rod journals, piston rings, valve guides, cam and lifters, etc..
Protects all internal engine components, including flat tappet and roller valve trains.
Proprietary additive package includes optimum amounts of ZDDP (Zinc and Phosphorus), Molybdenum and detergents.
Requires no additives or supplements for maximum protection.
Fully compatible with gasoline, methanol and high octane race fuel.

Check Stock

S SYDIEN 1Pc Universal Cooker Relief Jigger Valve Replacement Regulator Weight Pressure Control 80KPA

⭐Package Content:1Pc Jigger Valve & 1Pc Stainless Steel Anti-Blocking Cover & 1Pc Anti-Blocking Bracket & 1Pc Exhaust Rod..
⭐Dimension:External Size (Approx):28x38mm/1.10''x 1.50''(D*H).Bottom Hole Diameter:10mm/0.39''..
⭐Pressure cooker regulator is essential for pressure cooker to work under normal situation. Ideal replacement jigger valve for pressure cooker..
⭐Suitable for 80kPa pressure cookers with a diameter of 10mm-10.5mm in the middle of the cover. NOT suitable for Explosion-proof pot..
⭐Please make sure the valve fits your pressure cooker properly and safe functioning before ordering..

Check Stock

ABS Balanced Float Ball Valve, 100 psi Pressure, 3/4 inch PT Male

Balance pressure between piston and Valve, as well as smaller ball and shorter level can bear high pressure..
adjustable arm with over 180 degrees of adjustment range..
Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" PE Float.
Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.

Check Stock

Acouto for SBC Push Rods, 16pcs Hardened Steel Pushrods Set 5/16in Diameter 7.8in Standard Length Fit for Chevy OEM Replacement Pushrod Set

Fitment---- Valve Push Rods are suitable for '55-'94 262, 283, 302, 305, 307, 327, 350 and 400 non roller cam engines. 100% brand new, please be assured of your purchase.
Size---- 5/16in diameter with welded (not pressed) ball ends, 7.800in standrad length. Please confirm whether the product is suitable before purchasing.
High Quality Steel---- The push rods are made of high-quality steel material, which are wear-resistant and durable, not easy to break. The manufacture of the push rod meets the strict quality requirements.
High Strength---- Heat treated for added strength, guideplate compatible. Durable one-piece construction, which has long service life, high precision and good reliability.
Good Replacement---- Mate perfectly with high energyand magnum rockers. Ideal and direct replacement for old or damaged valve push rod, dependable to use.

Check Stock

Longray SP4A Stainless Steel Sprayer, 1 Gallon, Metallic

【All Stainless Steel Structure】- the pump, box, cover, rod, pump handle and rod handle are all made of durable stainless steel. Braided durable hose， not cheap plastic - with Viton seals and gaskets.
【HAND-PUMPED SPRAYER】- This sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.adjustable spray is perfect for misting.
【WIDE-MOUTH WATER INLET】- This sprayer boasts valve and pressure gauge that can provide convenience and ensure safety.Large Wide Mouth opening allows for easy filling and cleaning and less spilling..
【FOR MULTI-PURPOSE】- Built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture, commerce and medicine.
[Note]-We provide 1 gallon 1.5 gallon 2.5 gallon 3 gallon 3.5 gallon stainless steel sprayer, blue film, the film is scratch-resistant and does not need to be torn.
the liquid is on the piston rod, only hydraulic spraying is required.

Check Stock

4PCS 12" Braided Dual Tire Valve Extension Stem + 90 Degree Extender Rod For Truck RV Trailer Wheel 300mm

4pcs 12 inch Valve stem extension +4PCS 90 degree can be applied to various types of vehicles with a single tire width of less than 12 inch, or a dual tire width of less than 12 inches. Small and convenient, easy to carry, suitable for fast inflating the vehicle in any situation..
High-strength carbon steel U-shaped chuck and screw design. The U-shaped chuck can be fixed on hubs of different sizes (0-0.59inch). The chuck is tightly locked on the hub by rotating the screw, which prevents the extension stem from falling off the valve core..
Our connector adopts a 360-degree rotating universal size, which can fit 99% of the valve cores and air pumps of car models. For example: RVs, truck, bicycles, car, Balance car, motorcycles, ATVs, Trailer and more..
The Valve Extension Stem Rod uses 304 stainless steel braided flexible hose and arrow-shaped weaving technology. The precise weaving technology protects the inside of the product from damage and improves the service life of the product..
Package included:4pcs 12 inch Valve Extension Stem + 4PCS U-Chuck +4pcs 90 Degree Stem.

Check Stock

DNJ EK1105M Master Engine Rebuild Kit for 2002-2003 / Dodge, Jeep/Liberty, Ram 1500/3.7L / SOHC / V6 / 12V / 226cid / VIN K

THIS KIT INCLUDES: Piston Set, Piston Ring Set, Balance Shaft Bearing Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump.
FITS: 02-03 Dodge, Jeep / Ram 1500, Liberty 3.7L V6 SOHC Naturally Aspirated.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit Engines w/ Stamped Steel Valve Covers, Master Kit, w/ Steel Valve Covers.
You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.

Check Stock

Reed Tool HWB Cast Ductile Hydrant Wrench

Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..

Check Stock

Hydraulic Top Link Cat 1-1 with Locking Block 18 1/8” - 26 3/8” with 2 x Hose

Including Hoses, Male Couplers with dust cover, Banjo Bolts,Washers.
Holder to hold the unit when it is un-used.
This top link is equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve.
Painted Black Color (Rarely paint damages & Scratches during cargo).

Check Stock