ReviewsValve Shaft

LAJIAOZ CV Removal Tool,CV Boot Tool,CV Joint Boot Installation Removal Expander Tool

• Compatible With: Vtt, Toyota, Corolla, Audi, BMW, UTV, ATV.
• Material: We use high -quality materials that have been tested many times to ensure the durability and safety of the product.
• Description: This tool can save time, money and prevent CV joint damage. Install CV Joint Boots, no need to disassemble the driver shaft from the vehicle or remove the CV connector from the drive shaft. The composite valve body combined with the simple control valve to send the air from the standard workshop.
• Introduction: When the assembly starts, the tool can be removed from the air pipeline when pressing (eight claws holding the arm) and keeping the pressure until the release button is pressed.
• Note: This product is only suitable for general-purpose dust cover, not special-purpose one.The pressure of the air pump should be at least 7.5..

OSOF 25Pcs Tyre Valve Stem Puller Tools Set - 10Pcs TR412 Snap-in Valve Stems with 10Pcs Valve Stem Cores, 1Pcs 4-Way Valve Tool, 1Pcs Dual & 1Pcs Single Head Valve Core Remover Installer Tool

• 【Function】25 In 1 Tyre valve stem puller tools set. For quick removal or installation of tyre valve inserts and repair tire.Works with any wheel that uses a standard 0.453" valve stem.With 10 replaceable Valve stems and multiple wrenches，meet your different needs..
• 【Material】- Durable plastic handle and robust steel shaft with a corrosion resistant plating these valve cores is copper nickel-plated valve cores .The nickel plating enhances the corrosion resistance of the valve core and valve stem. Rubber TR412 Valve Stem Cores ，more durable, safe and reliable..
• 【Widely Use】- Suitable for repair of tubeless tires for passenger cars, bicycle,motorcycles, ATVs, electric cars, off-road vehicles and trucks.Fit for all standard valve cores..
• 【Easy to Use】- Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems.The tool sets easy to carry and use..
• 【Package】1 Pcs Long Valve Stem Puller Installer Tool.
• 10 Pcs TR412 Valve Stems with 10 Pcs Valve Stem Cores.
• 1Pcs Single Head Valve Core Remover, 1 Pcs Dual Single Head Valve Core Remover ,1 Pcs 4-Way Valve Tool, 1 x Tire Valve Stem Core Tool -- Total 25Pcs/Pack.

Fat Elvis

Mophorn Helm Outboard Hydraulic Steering Pump 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats

• ...aft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing..
• Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use..
• Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be a worry. Enjoy the steering helm for years to come..

Engine Valve Cover and Gasket Set Replacement for BMW X3 X5 Z4 128i 323i 328i 328xi 528i 528xi

• Premium Material: YHTAUTO Affordable and Prime Engine Valve Cover is Precisely Manufactured with High Quality Plastic, Designed to Protect the Engine to Work Stably and Smoothly.
• Direct Fit: Replacement for BMW 128i 2008-2013, 323i 2006-2011, 328i 2007-2013, 328i xDrive 2009-2013, 328xi 2007-2008.
• Direct Fit: Replacement for BMW 528i 2008-2011, 528i xDrive 2009-2010, 528xi 2008, X3 2009-2012, X5 2007-2010, Z4 2006-2011.
• Package Included: Valve cover, valve cover gasket, bolts, PCV valve, eccentric shaft actuator seal.
• Reference Number: 11127552281, URO011833, 264-935.

Himore Pressure Washer Pump KIT for Honda EXCELL XR2500, XR2600, XC2600, EXHA2425, XR2625 by The ROP Shop

• New PRESSURE WASHER PUMP fits Honda Excell XC2600 XR2500 XR2600 XC2600 EXHA2425 XR2625.
• Fits the 7/8" shaft diameter, Only Honda Short Shaft Horizontal Engines for Excell,.
• Quick connect adaptor included - connect quickly to high pressure hose.
• Includes hardware kit ( Bolts, Lockwashers, Spacers Shaft Key) and Instructions.
• Garden hose hookup / Thermal valve/ Chemical injector included.

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

• ...ower pump would fit or not ! Not fit all series models, pls check the mounting size, pressure power and shaft size before you buy. Nothing is worse than having to return a product. Let’s work together to avoid this !.
• 003e Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock.
• 003e 100% Satisfaction Seller Service: EZJOB pressure washer pumps promise 48 Hours Pre-Sale and After-Sale Service. The mounting flange provides a convenient connection to most 3/4’’ diameter shaft. If you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, and send us your former pump's pictures, or any after-sales problems, we would like to service you. Pls notice - Pumps are consuming products, running about 2-3 years..

Dante Products FP.GV.PTR Pewter Floor Plate for Dante Globe Valve

• Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
• 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
• The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.

Frienda 8 Pieces Tire Valve Stem Removal Tool Single and Double Heads Valve Core Remover Tire Repair Install Tools for Cars Truck Motorcycle Bicycle

• What you will receive: these tire valve stem removal tools have a total quantity of 8 pieces in total, including 6 pieces of dual head valve core removers and 2 pieces of single head valve core removers.
• The abundant quantity and various styles can meet your different using demands.
• 3 Styles for convenience: these single double head valve core removers are designed with 3 styles of dual head, single head, and mini size dual head valve core remover in different colors.
• Dual-purpose remover tools can not only remove valve core of air conditioning but also remove valve core of tires.
• Reliable and durable to use: the handles of these tire remover repair tools are made of quality plastic, aluminium alloy and wood material for high practicality and comfort.
• The steel shaft is firm, reliable, and durable, which is not easy to rust or break for a long using time.
• Nice presents for others: these valve core remover tools can be a nice and delicate present for your parents, brothers, cousins, colleagues, and people who like repairing tires, which will enhance your relationship and express your love to them.
• Easy and simple to use: these tire repair install tools can be operated easily, which offer you a lot of convenience in installing and removing the valve cores,....

Valterra 7301 ABS Gate Valve, Black, 3\ Slip

• APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
• KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
• SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed - PVC with female Slip/Hub fittings which receive 6" PVC pipe.
• REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.

New 2700 psi Pressure Washer Pump Replaces AR RMW2.2G24

• FITS MANY BRANDS SUCH AS KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA, POWERSTROKE, and OTHERS!.
• 2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8" and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE.
• SPECS: FITS 7/8" Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES.
• MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4" - CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16" – 6 3/16" - 6 7/16".
• Please Compare The Picture With Yours Before Purchasing..