ReviewsValve Spring For Komatsu

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

NICHE Cylinder Head Valve Spring Kit For 1987-2011 Yamaha Big Bear Bruin Grizzly Moto-4 Raptor Warrior Wolverine 350 400

  • Replaces OEM Part Numbers: Yamaha 3GD-12151-00-00, 22U-12113-00-00,1UY-12114-01-00, 1UY-12111-01-00,1UY-12121-01-00, 3Y1-12116-00-00,93210-09350-00, 3Y1-12156-00-00,3Y1-12117-01-00, 1J7-12118-00-00.
  • Compatible with the 1993-1999 Yamaha Kodiak 400, 1996-1999 Yamaha Wolverine 350, 2000-2011 Yamaha Big Bear 400.
  • Includes Intake Valve, Exhaust Valve, Valve Spring Retainers, Valve Spring Seats and Rocker Arms.
  • Also Includes Inner/Outer Valve Springs, Wave Washers, O-Rings, Valve Seals and Valve Cotters.
  • Valves and Retainers are Made of a Hardened, Heat-Treated Alloy.
Check Stock

OEMTOOLS 25029 Flexible Air Valve Holder Hose 14 Length Fits 14mm and 18mm Spark Plug Holes Valve Spring Tools for Air Compressor

  • SAVE TIME AND PREVENT STRESS: Replace valve springs or valve stem seals without removing the engine head.
  • FITS MOST VEHICLES: This air holder fits engines with either an 18mm or 14mm spark plug socket size, making it compatible with the most common....
  • MORE ROOM TO WORK WITH: Easily connect the valve hose to the spark plug hole with the flexible 14 inches of hose, which is longer than some....
  • THE EASY WAY TO DO ENGINE VALVE WORK: While attempting a valve spring removal or valve seal removal, use this valve holder tool to blow compressed air....
  • AN ESSENTIAL PART OF A VALVE SPRING KIT: Unless you are a hobbyist wanting to take apart an engine head for educational or recreational reasons, air....
Check Stock

SILCA EOLO III CO2 Inflator Head Only | Presta & Schrader Compatible | Bicycle Tire Pump CO2 Adaptor | Easy Push to Inflate | Head for Co2 inflator for Bike Tires

  • Versatile | Looking for a bike pump Presta valve adapter? The Silca CO2 bike tire Inflator is the smallest spool valve CO2 regulator on the market and works with any 16g or 25g threaded cartridge. Co2 inflator Presta and Schrader valves compatible..
  • Easy to Use | Thread the cartridge on, press it onto the valve, pump with co2, and air is in your tire. Simple press-to-pump design. No lever needed! Lightest spring action of any spring-valve regulator. Works perfectly with the Presta valve pump or the Schrader valve pump..
  • Airflow Regulation | Light action spring provides easy control over how much co2 is released. Press this EOLO III Silca pump lightly for lesser air in your tire or put more pressure for faster tire inflation..
  • Great Emergency Kit Tool- The small and lightweight quality of the EOLO make it essential for your bike repair kit or bicycle tire repair kit. Perfect to keep in your saddle bag, pocket or your Silca Premio. You can count on this tiny tool to get you home in a pinch!.
  • Camera-lens' Style Valve Head | Allows for easy installation even in disc wheels.This Silca tool features 3 (Red, White, Green) insulation rings to prevent frozen fingers from co2 inflator cartridge..
Check Stock

ROOSAIN 5.7 6.1 6.2 6.4 Cummins Valve Spring Compressor for Dodge Ram 2500 3500 5.7L 6.1L 6.2L 6.4L Engine

  • Compatible with: 5.7 6.1 6.2 & 6.4 cummins Dodge ram 2500 3500 valve spring compressor.
  • Material: made of high -strength stainless steel and aluminum valve spring compressors.
  • Installation: Easy to install, while a unique lead screw and cage design compresses the spring, freeing up your hands for easy access to the valve locks.
Check Stock

JEGS 514146 LS Valve Spring Retainer [7 Degree 1.035 in. Diameter] set of 16

  • Drop-In Dual Spring Kit for LS - This Dual Valve Spring Kit includes carefully matched components that drop into GM LS engines without any machine work..
  • High Lift - Includes Dual Valve Springs that are capable of handling up to 0. 660" valve lift..
  • Quality Components - Includes only the best valve train parts that are constructed from the best materials available..
  • Fits GM 4. 8, 5. 3, 5. 7, 6. 0 and 6. 2 GEN III/IV LS engines.
Check Stock

Monoblock Hydraulic Directional Control Valve, 3 Spool, 11 GPM, SAE Ports

  • Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3600 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
  • Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
  • Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
  • Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
  • Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check Stock

DPTOOL Valve Pressure Spring Installer/Remover Tool Plier for BMW Mini N12 N14 N16 N18 Engine Timing Tool and for Peugeot Citroen 1.6T

  • Applicable Engine: Compatible with BMW MINI N12, N16, N18.
  • for Peugeot 207, 308, EP6 Engine. Replace BM number119571 119572 119573.
  • Function: Specially designed to remove and install the pressure spring on intermediate lever. and the valve slider holding pliers could easy to install the valve slider.
  • Accurate : Our valve pressure spring remover and installer have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine.
  • More Convenience : This kit include valve pressure spring remover/ installer , and valve slider holding pliers, three tools put in a suitcase, the case design easy to store and carry.
  • Quality Guarante: Our camshaft timing tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. and we offer lifetime warranty, let you order without worry.
Check Stock

iPower 4 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4", HVAC Extractor Fan Vent, Range Hoods

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathro....
Check Stock

Arko Tractor Parts Overhaul Kit for Perkins 3.152 for Massey Ferguson Tractors 135 148 230 240 250 254 255 350 353 550 355 360 363 253 U5MK0701 Lip Type Seal

  • Brand New Aftermarket Overhaul Kit For Perkins 3.152 Lip Type Seal.
  • For Massey Ferguson Tractors 135 148 230 240 250 254 255 350 353 550 355 360 363 253.
  • The Package Includes: 3* Finished Cylinder Liner 31358345 91,49 mm/ 3* Piston + pincirclips 68332 91,49 mm / 3* 5 Ring Set type 41158057 (2.38 + 2,38....
  • 1* Full set Gasket / 3* Exhaus Valve 31431591 / 3* Inlet Valve 31431281 / 6* Valve Guide 33261723 / 6* Valve Spring 780007 / 6* Valve Spring 780006 /....
Check Stock

ABN 8in Valve Spring Compressor, 3-6.5in Capacity, 6in Clearance – Small Overhead OVH Engine Repair Compressing Tool

  • EASY COMPRESSION: The ABN Valve Spring Compressor Small Overhead OVH Engine Repair Compressing Tool allows you to effortlessly disassemble and reassemble valves.
  • For correctly fitting, installing, and removing automotive valve springs.
  • FITS YOUR VEHICLE: Suitable for small to medium engines with overhead valves.
  • Works with a cylinder head on your workbench or any OVH head removed from the block.
  • 3-inch to 6.5-inch (7.6cm to 16.5cm) capacity with a 6-inch (15.2cm) throat clearance.
  • GRIP COMFORTABLY: Molded and cushioned handle that will give you more leverage.
  • Automatic locking and an easy grip handle help you to keep the tool in place and gain slip-free leverage.
  • EASY TO USE: Close the clamp until the fork-type portion of the tool fits snugly on the spring cap and the screw pivot is on the valve face, then screw in the threaded rod to compress the spring.
  • Automatically locks in place and is simple to release, lift, and compress.
  • BUILT TO LAST: Constructed from high-quality metal that eliminates tool flex.
  • Strong and adjustable cam-action works perfectly in line with the valve and can get into even the narrowest valve chambers.
Check Stock