ReviewsValve Stem Cap Pressure Gauge

Sunmns 24 Pack Tyre Valve Dust Caps for Car, Motorbike, Trucks, Bicycle (Black)

Function:these black valve caps can protect valve against exposure to dirt and dust.
Also can replace the original bad valve cap.
Durable plastic material: the hard valve cap is made of good quality and durable plastic, dustproof and waterproof.
Easy to install: installation only need screws it onto tire valve stem.
It is easy to install or remove when you want to check air pressure.
Detailed stripe and dome shape design: convenient to grip and fit for most valve.
Wide applications: each valve cap size is 13 x 10 mm/ 0.51 x 0.39 inch.
Universal size fits for most cars, bus trucks, motorcycle and bikes.

Check Stock

BAIONE Universal Tire Pressure Indicator Valve Stem Caps, Car Tire Pressure Monitor Valve Stem Cap for Motorcycles SUVs Bike Bicycle Trucks Dust Stem Covers (B)

Durable Tire Valve Stem Cap : Made of high quality steel material, which is corrosion resistant, durable.Protection the tire valve to ensure stability and protection when driving..
Smart Tire Pressure Monitoring Design: These valve caps can constantly monitor your tire pressures with Green/Yellow/Red color indicators.Green shows that tire pressure is normal, Yellow shows that the pressure is 10% lower than standard, Red alerts you that the pressure is 25% lower than standard..
Airtight, Leakproof Seal: These tire valve caps provide an enhanced seal to help prevent air leakage and to properly keep out dust, dirt, grime and road debris from damaging cores..
Universal Tire Air Valve Caps: can be use for 32-36PSI(2.2-2.4Bar) all of the vehicles, cars, trucks, off-road bicycles, road bikes, motorcycles..
Package included: 4 x Tire Valve Stem Caps. Super easy to install and read, an easy way to check your tires pressure.If you have any issues, please feel free to contact us,we will give you the best solutions..

Check Stock

Accu-Gage S60XA 5-60 PSI Swivel Angle Chuck Dial Tire Pressure Gauge with Bleed Valve

Gauge has a full geared, precision movement with bronze bourdon tube.
unlike piston-plunger-type gauges, the bourdon tube movement is not affected by....
Swivel angle chuck makes it easier to reach tire valves.
Durable steel case with polished brass bezel, stem, pressure release valve assembly and a 2 inch dial.
5-60 PSI steel case gauge (recommended for tire pressures 15-45 PSI).
Needle holds pressure reading until released and a pushbutton valve bleeds air to desired tire pressure.

Check Stock

Accu-Gage S15XA 3-15 PSI Swivel Angle Chuck Dial Tire Pressure Gauge with Bleed Valve

Gauge has a full geared, precision movement with bronze bourdon tube.
unlike piston-plunger-type gauges, the bourdon tube movement is not affected by....
Swivel angle chuck makes it easier to reach tire valves.
Durable steel case with polished brass bezel, stem, pressure release valve assembly and a 2 inch dial.
3-15 PSI steel case gauge (recommended for tire pressures 5-12 PSI).
Needle holds pressure reading until released and a pushbutton valve bleeds air to desired tire pressure.

Check Stock

20 Pack Tyre Valve Dust Caps for Car Motorbike Trucks Bike Bicycle Black

Tyre valve dust caps: valve caps can protect valve against exposure to dirt and dust.
Also can replace the original bad valve cap of the tyre.
Durable plastic material: the valve cap is made of good quality and durable plastic, dustproof and waterproof.
With detailed stripe design, convenient to grip.
Easy to install: dome shape and small, installation only need screws it onto tire valve stem.
It is easy to install or remove when you want to check air pressure.
Applications: each valve cap size is 13 x 10 mm/ 0.51 x 0.39 inch.
Universal size fits for most cars, bus trucks, SUVs, motorcycle and bikes with schrader valve.
Package includes: package contains 20 pack plastic valve caps.
Large quantity valve caps can meet your multi purpose need.

Check Stock

Outus 20 Pack Tyre Valve Dust Caps for Car, Motorbike, Trucks, Bike, Bicycle (Green)

Tyre valve dust caps: valve caps can protect valve against exposure to dirt and dust.
Also can replace the original bad valve cap of the tyre.
Durable plastic material: the valve cap is made of good quality and durable plastic, dustproof and waterproof.
With detailed stripe design, convenient to grip.
Easy to install: dome shape and small, installation only need screws it onto tire valve stem.
It is easy to install or remove when you want to check air pressure.
Applications: each valve cap size is 13 x 10 mm/ 0.51 x 0.39 inch.
Universal size fits for most cars, bus trucks, SUVs, motorcycle and bikes with schrader valve.
Package includes: package contains 20 pack plastic valve caps.
Large quantity valve caps can meet your multi purpose need.

Check Stock

Tire Supply TR-572 Brass Commercial 3-3/4 Valve Stem (10)

Snap-In Tubeless Valve Stem – Created as a Schrader replacement these black tire valve stems can be installed into any standard wheel seamlessly using and let you add a replacement tire valve core effortlessly with a core remover tool..
Leak-Resistant, Road-Ready Design – The heavy-duty rubber is weather resistant, strong enough to stand up to on- and off-road adventures and won’t leak air or retain moisture even during intense climate or environmental changes..
Rust-Resistant Brass Tip – Each TR-413 tire valve stem is fitted with a high-quality brass fitting that allows you to safely secure a tire valve stem cap. It also allows for better air flow when you’re filling up tires or checking tire pressure..
Optimal Stem Valve Length – Valve-Loc valve stems for tires are 1.25” in length and fit wheel hole diameters of 0.453” to ensure they can fit a wide range of common cars, trucks, SUVs, RVs, outdoor recreational vehicles and other standard-sized wheels..
Complete Black 4-Pack – Every order comes with four individual snap-in, tubeless tire valve stems to make it easier to swap out one at a time as needed, or to replace all stems on your vehicle at once. They’re also backed by our unbeatable service!.

Check Stock

Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap

...to remove stubborn valve stems with less effort. This remover and installer definitely a good helper for changing the valve stem..
TR413 VALVE STEM - Snap-in rubber car tire valve stems for tubeless 0.453” (11.5mm) diameter rim holes. Outside EPDM rubber is for ozone resistance. Apply for 65 PSI max cold inflation pressure and max rim thickness of 0.156”. fits cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
Slotted-Head Valve Cap - 2 Pieces of valve remover caps are equipped in this kit. 2 in 1 valve caps are made of premium material, strong and durable to use. The top slot head can be used to remove valve cores and the bottom can be used as tire caps to prevent air leaking and dust. The little caps are made of highest quality nickel-plated brass and with a seal washer inside..
SINGLE HEAD REMOVER - All the accessories in this kit includes single head valve remover and 4 pieces valve cores. The valve stem core tool is plastic & stainless steel and with a handy pocket clip beside for easy carrying. The completed valve stem replacement tool kit is a perfect one for removing old leaky or faulty valve stems..

Check Stock

SAFELIFE Brass Air Chuck Closed Flow Tire Chuck Heavy Duty Lock on Tire Inflator Chuck with Clip

【Closed Flow】 Closed flow, with shut-off valve inside, air only passed through when the air chuck is engaged with a tire valve..
【Heavy Duty】 Upgraded heavy duty brass air chuck make it easier locking onto stem valves - no air leakage ever since..
【Lock on Clip】 When use the air chuck to inflate a tire or measure pressure, please use the lock-on clip to secure the chuck to the valve stem for sealing..
【Fitment Type】 1/4" female NPT, compatible with most tire inflator, wheel pressure gauge and compressor. Straight chuck tip is suitable for all vehicles..
【Satisfaction guarantee】 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues..

Check Stock

Accu-Gage by Milton Presta Valve Bike Tire Pressure Gauge with Bleeder Valve for 0-15 PSI - ANSI Certified

DURABLE: Unlike piston-plunger-type gauges, this gauge is designed for heavy-duty use. The bourdon tube movement is not affected by changes in....
ACCURATE READINGS: Fitted with a Presta Valve stem and Air Chuck, this tire pressure gauge provides a seamless connection seal with no air leakage,....
ANSI CERTIFIED: This heavy duty bike tire gauge is calibrated to ANSI Commercial Grade B gauges and meets ANSI B40.1 Grade B specifications to ensure....
DUAL FUNCTION: Not only does this tire pressure gauge provide quick, accurate readings — it's also equipped with a deflator valve and outfitted to....
A SAFETY INVESTMENT: Maintaining proper tire pressures improves bicycle handling and reduces the risk of tire failure across terrains, extending the....

Check Stock

Accu-Gage by Milton Presta Valve Bike Tire Pressure Gauge with Bleeder Valve for 0-60 PSI - ANSI Certified

DURABLE: Unlike piston-plunger-type gauges, this gauge is designed for heavy-duty use. The bourdon tube movement is not affected by changes in....
ACCURATE READINGS: Fitted with a Presta Valve stem and Air Chuck, this tire pressure gauge provides a seamless connection seal with no air leakage,....
ANSI CERTIFIED: This heavy duty bike tire gauge is calibrated to ANSI Commercial Grade B gauges and meets ANSI B40.1 Grade B specifications to ensure....
DUAL FUNCTION: Not only does this tire pressure gauge provide quick, accurate readings — it's also equipped with a deflator valve and outfitted to....
A SAFETY INVESTMENT: Maintaining proper tire pressures improves bicycle handling and reduces the risk of tire failure across terrains, extending the....

Check Stock