ReviewsValve Test Stands

Munchkin LATCH Deluxe Bottle and Valve Brush

Durable silicone brush reaches hard-to-clean areas.
Valve brush, stored in the base, is ideal for thorough cleaning of the LATCH nipple and anti-colic valve.
Suction cup base stands upright away from germs.

Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....

Check Stock

ACCRETION TR413 Rubber Snap-in Tire Valve Stem (100pcs/bag)

High Quality Brass, Chrome Finish and EPDM Rubber, Long Service Life.
Fits 453" and .625" Valve Holes, 1 1/2" inch Effective Length, Complete Size:1.7" L x 0.75" W.
Hold the Pressure Well, 100% Air Leak Test to Ensure Safety.
4 Pcs TR-416 Metal Clamp in Valve Stem, Rated for 130 PSI.
Easy to Install, High Temperature Valve Core Included.

Check Stock

American Standard 6561017.020 Trimbrook Urinal with 3/4-In Top Spud, 26.75 in wide x 14.00 in tall x 17.5 in deep, White

This kind of GQ-837 dual Urinal flush valve has two different functions, devide to Sensor and Time delay dual functions.
When someone stands in front of this GQ-837 Urinal flush valve, this flushometer will automatically sense water after 8 seconds, each time is 1.0 GPF.
This kind of GQ-837 dual urinal flushometer is made of Brass ,High Efficiency, Low Consumption..
This kind of GQ-837 flush valve surface is polish chrome, and the delay button of this urinal flush valve is on the right ..

Check Stock

EZISOE 50 Pcs TR412 Black in Standard Length Stem Snap Rubber Valve Stems,for Off-Road Trucks ATV,SUVs,RVs with Tubeless 0.453in 11.5mm Rim Holes on Vehicles

QUANTITY:TR412 Rubber Snap-in Valve Stem (50 pcs/ bag).
Wheel bore diameter :0.453 inches, effective length :1.25"(L),Suitable for all kinds of ordinary cars, trucks, SUVs, RVS, outdoor recreational vehicles and other standard size wheels.
Excellent Performance:Meet SAE requirements and maintain flexibility in extreme cold weather.
Advanced Materials:Tire stem through EPDM rubber test, ozone test, 100% leakage test, valve core adopts high temperature brass, good handle, corrosion resistance, more durable, rust proof.
Easy to install: Bleed tires and puncture tire rims, insert new rods from within the rim until it clips into place.

Check Stock

EZISOE 30 Pieces TR416 Metal Copper Valve Stems Outer Mount Fits .453'/.625' Rim Holes Long 18.5/40mm

High Quality Brass, Chrome Finish and Natural Rubber, Long Service Life.
Fits .453″/.625″ Valve Holes, 18.5/40mm Effective Length.
Hold the Pressure Well, 100% Air Leak Test to Ensure Safety.
30 Pieces TR-416 Metal Clamp in Valve Stem.
Easy to Install, High Temperature Valve Core Included.

Check Stock

DeShan 25 Pieces TR416 Metal Valve Stems Outer Mount Fits .453' & .625' Rim Holes Long 1 1/2'

Product Information: Fits 453″ and .625″ valve holes, 1 1/2″ inch effective length, full size: 1.7″ L x 0.75″ W.
Excellent quality: made of high-quality brass, chrome-plated and EPDM rubber, long service life.
Hold the Pressure Well, 100% Air Leak Test to Ensure Safety.
TR-416 Metal Clamp in Valve Stem, Rated for 130 PSI.
Easy to Install, High Temperature Valve Core Included.

Check Stock

Moen U130CX M-CORE 3-Series 3 Port Shower Mixing Valve with Cold Expansion PEX Connections, or Unfinished

PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
CHOOSE FROM A VARIETY OF TRIM: Improved style options, including the perfectly matched mixing and transfer trim, are available.
VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed-in with the option of functionality and style changes that don't require removing or changing the valve(s).
STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
INTEGRATED TEST CAP: Offers a precise temperature limit stop adjustment, and the integrated test cap allows installers to easily flush and test the system without having to remove or install the cartridge.
SEVERAL PLUMBING OPTIONS: M-CORE mixing and transfer valves are available in several inlet and outlet plumbing options to meet the needs of the installers.

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

... range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel injection pump pressure easily and quickly. You can compare the pressure value to the manufacturer's recommended refer....

Check Stock

Refrigeration Gauges Digital Manifold HVAC Gauge Set Vacuum Pressure Temperature Leakage Tester for Testing Maintaining Air-Conditioner Refrigerator

Autool digital refrigeration gauges including Wording condition pressure test, Overheating test, Vacuum pressure test, Pressure leakage test,....
With double pressure test, dual temperature test, digital readout, multi-unit switching, multi-mode function and built-in refrigerant database,....
Air pressure gauge Built-in 89 kinds of refrigerant pressure-evaporation temperature database, also calculate the subcooling superheat, to facilitate....
Large-size liquid crystal display, LCD backlight support, data display clear and easy to read, convenient light operation. Long-life valve switches,....
The car ac recharge kit instrument uses high-strength engineering plastic and flexible non-slip silicone design. The whole machine is solid and....

Check Stock

Moen U130X M-CORE 3-Series 3 Port Shower Mixing Valve with Crimp Ring PEX Connections, or Unfinished

PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
CHOOSE FROM A VARIETY OF TRIM: Improved style options, including the perfectly matched mixing and transfer trim, are available.
VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed-in with the option of functionality and style changes that don't require removing or changing the valve(s).
STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
INTEGRATED TEST CAP: Offers a precise temperature limit stop adjustment, and the integrated test cap allows installers to easily flush and test the system without having to remove or install the cartridge.
SEVERAL PLUMBING OPTIONS: M-CORE mixing and transfer valves are available in several inlet and outlet plumbing options to meet the needs of the installers.

Check Stock