ReviewsVariable Controlled Drive

Milwaukee M12 12-Volt Cordless PVC Shear (2470-20) (Power Tool Only - Battery, Charger and Accessories Sold Separately)

Patented Shear Mechanism: Allows for cuts up to 2-inch Schedule 80 PVC..
Quick Blade Return: Increases productivity in repetitive cuts..
Stainless Steel Blade and Aluminum Jaw: Impact, water and rust resistant..
Razor-Sharp Pierce-Point: Burr-free cuts on PVC, CPVC, PEX Tubing, BlazeMaster, ABS, Non-Metallic Conduit, and Rubber Hose..
Power Tool Only - Battery, Charger and Accessories Sold Separately..
Powerful Mechanism - Cuts up to 2" schedule 40 PVC in 3 seconds. Ultra Sharp Blade with Pierce Point - No burrs or shavings to remove.
Offset Blade - Cuts PVC / PEX in-wall, in-ground, or close to wall Quick Return Blade - Increased productivity during repetitive cuts. All Metal Planetary Drive - Delivers over 200 cuts per charge.
Stainless Steel Blade and Aluminum Jaw - Impact, water and rust resistant.
Variable Speed Trigger - Controlled cut in warm or cold weather.
On Board Fuel Gauge - Displays remaining run-time.

Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.
The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.
Variable 2-speed 1/2" Hammer Driver-Drill (0-500 and 0-2,000 RPM) with BL Brushless Motor delivers 530 in.lbs. of Max Torque.
Variable speed Impact Driver (0-3,400 RPM and 0-3,600 IPM) with BL Brushless Motor delivers 1,500 in.lbs. of Max Torque.

ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Powerful 7.0 amp motor for tough applications.
1/2 in. keyed chuck to accept large diameter bits designed for woodworking and cutting.
Side assist handle for controlled, accurate drilling.
Variable Speed trigger for controlled drilling speed.

Poweful 7.0 Amp motor for tough applications.
1/2 inch keyed chuck to accept large diameter bits designed for wood working and cutting.
Side assist handle for controlled, accurate drilling.
Variable Speed trigger for controlled drilling speed.

... [Smart Loosen Technology & 1/4" All Metal Chuck] Smart loosen mode turns on when the green light on the cordless impact drill battery is on. It will automatically stop when tightening screws, providing excellent speed and torque balance for a wide range of uses. The speed is controlled by pressing the variable speed switch, the higher the pressure, the higher the speed. The 1/4" all metal hex impact driver for quick change chuck will improve work efficiency and save working time..
[Forward & Reverse, 2-speed Transmission] The high-impact driver headset can be operated in both forward and reverse directions by simply pressing the reverse switch on the impact driver body. The 2-speed trigger design allows the power impact driver kit speed range to reach 0-2000 RPM. For more precise control, the direction and speed can be freely controlled according to different needs during operation..
[High-capacity 4.0Ah Battery & Built-in LED Light] The brushless cordless impact driver kit is equipped with a high-capacity 4.0Ah battery for a longer working time. The battery in the cordless impact drill driver set is compatible w....

Your child will love building the amazing app-controlled Batmobile toy and patrolling the streets of Gotham City with Batman! Set features Batman....
This LEGO Batmobile is built with 321 pieces and includes a Batman minifigure, and a Blue-tooth controlled hub which enables the builder to drive,....
The fast, remote-controlled Batmobile has 4-wheel drive and 2 dual stud shooters and an opening cockpit for a minifigure driver. Control the Batmobile....
This LEGO DC Super Heroes Batmobile building set brings home the incredible action of the cinematic DC Justice League film series and is compatible....
This cool app-controlled car toy measures over 3” (9cm) high, 7” (19cm) long and 5” (13cm) wide..

Powerful 13.0 AMP motor delivers more output and variable (4,000 - 10,000) RPM.
SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
Variable speed control dial enables user to match the speed to the application.
Makita 9566CV 6" SJS High-Power Cut-Off/Angle Grinder.

ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

specification： 532185685 Variable Vari-Speed Drive Control Cable Assembly 185685.
Fits:Walk Mower 5521CH A Repair Parts (B) 5521 CHB () (2003-03)-->Drive Assembly.
Fits:917378401,917378493,917378644,917378482,917378400,917378402,917378403,917378404,917378490,917378494,917378480,917378481,917378491,917378492,917378....
Drive control assembly 185685 engages the gear case to drive the lawn mower..
PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer.

has an edison plug for pinspot or other lightsounce that is DMX controlled as well.