ReviewsVariable Helix End Mill

Humminbird 720108-1 14 M360 2DDI Y MEGA 360 & 2D/MDI Y Cable

Compatible with: MEGA 360, SOLIX 15 MSI G2, SOLIX 15 MDI G2, SOLIX 12 MSI G2, SOLIX 12 MDI G2, SOLIX 10 MSI G2, SOLIX 10 MDI G2.
Combines MEGA 360 Imaging transducer and 14-pin Dual Spectrum / MEGA Imaging+ transducers (including Built-in MEGA Imaging) into one 14-pin plug for connection to the same, compatible SOLIX fish finder, or HELIX fish finder with additional AD HELIX M360 adapter..
For use when connecting a MEGA 360 Imaging transducer to a compatible SOLIX or HELIX fish finder, in conjunction with a Built-in MEGA Imaging transducer or external 14-pin 2D /MDI transducer..
If this cable is being used with a HELIX fish finder, then the #720109-1 AD HELIX M360 adapter must be attached between this y-cable and the HELIX unit, to the single plug end of the Y cable..

Strong core: SDS max bits have tapered core for bit strength and maximum durability, especially when drilling deep holes.
Aggressive material removal: Two stage flute design with variable helix pattern of DEWALT SDS hammer drill bits allows for efficient debris removal.
Clean, round holes: Two sharp cutting edges for true holes.
Wear mark indicator: For accurate diameter of holes.
Elongated four flute helix for faster material removal.

Strong core: SDS max bits have tapered core for bit strength and maximum durability, especially when drilling deep holes.
Aggressive material removal: Two stage flute design with variable helix pattern of DEWALT SDS hammer drill bits allows for efficient debris removal.
Clean, round holes: Two sharp cutting edges for true holes.
Wear mark indicator: For accurate diameter of holes.
Elongated four flute helix for faster material removal.

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
Package Included：8 x 4 Flutes End Mill Cutter.

1.Four flutes produce a better finish than fewer flutes..
3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..

5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..

Strong core: SDS max bits have tapered core for bit strength and maximum durability, especially when drilling deep holes.
Aggressive material removal: Two stage flute design with variable helix pattern of DEWALT SDS hammer drill bits allows for efficient debris removal.
Clean, round holes: Two sharp cutting edges for true holes.
Wear mark indicator: For accurate diameter of holes.
Elongated Four Flute Helix for Faster Material Removal.
For use with electric or cordless rotary hammers..

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..