ReviewsVariable Helix End Mills

ACCUCUT I4KES 3/16 Carbide End Mill, 4 Flute, Square End, Ideal for Steel, Forge Steel, Copper and Alloys, 45 Degree Helix (5 Pieces)

  • GENERAL USAGE：Our end mill can be applied for steel, forge steel, copper, alloys & material < HRC 50.
  • SOLID CARBIDE：This end mill is made of ultra fine grain tungsten carbide. The hardness is 92 HRA.
  • AlTiCrN COATING：it features tough, resists wear & lubricity for smooth surface and heat protection.
  • 4 FLUTE CUTTER：great for speedy cutting. Ideal for planar, step, groove, forming surface & more.
  • 45° HELIX：high helix design can perform a better finishing cut than those with lower helix degree.
Check Stock

DEWALT SDS+ Hammer Bit, Rock Carbide, 1/2-Inch by 4-Inch by 6-Inch (DW5437)

  • Strong core: SDS max bits have tapered core for bit strength and maximum durability, especially when drilling deep holes.
  • Aggressive material removal: Two stage flute design with variable helix pattern of DEWALT SDS hammer drill bits allows for efficient debris removal.
  • Clean, round holes: Two sharp cutting edges for true holes.
  • Wear mark indicator: For accurate diameter of holes.
  • Elongated Four Flute Helix for Faster Material Removal.
  • For use with electric or cordless rotary hammers..
Check Stock

Peugeot Paris Olivier Pepper Mill 22cm - 9in Olive Wood

  • Made in France. Peugeot Mills are partially filled with pepper at the factory in France as part of final assembly and testing. Ready to use..
  • The pepper mechanism is equipped with a helix-shaped double row of teeth for a perfect grind. Patented treatment protects the steel from corrosion while maintaining its sharpness and wear resistance..
  • Classic grind adjustment: turn the top knob tighter (clockwise) for finer grinds.
  • looser (counter-clockwise) for coarser grinds..
  • Releases maximum flavor and aroma by first cracking each peppercorn before it is ground.
Check Stock

Peugeot Bistro Chef Pepper Mill, 10cm/4\

  • Made in France. Peugeot Mills are partially filled with pepper at the factory in France as part of final assembly and testing. Ready to use.
  • The pepper mechanism is equipped with a helix-shaped double row of teeth that guide and hold the peppercorns for a perfect grind. It has a patented treatment that protects the steel from corrosion.
  • Classic grind adjustment: turn the top knob tighter (clockwise) for finer grinds.
  • looser (counter-clockwise) for coarser grinds.
  • Releases maximum flavor and aroma by first cracking each peppercorn before it is ground.
  • Lifetime limited guarantee on the mechanism and 5 years on the exterior of the mill.
Check Stock

Peugeot Paris Classic Collection Antique Pepper Mill 22cm/8-3/4 Natural 30971

  • Made in France. Made of PEFC certified beech wood. Peugeot Mills are partially filled with pepper at the factory in France as part of final assembly....
  • The pepper mechanism is equipped with a helix-shaped double row of teeth that guide and hold the peppercorns for a perfect grind. It has a patented....
  • Releases maximum flavor and aroma by first cracking each peppercorn before it is ground.
  • Classic grind adjustment: turn the top knob tighter (clockwise) for finer grinds.
  • looser (counter-clockwise) for coarser grinds.
Check Stock

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Made of extra-fine grade carbide for ultra high transverse rupture strength.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

Peugeot Paris u'Select 7-inch Pepper Mill, Passion Red, 41212

  • Made in France. Made of PEFC certified beech wood. Peugeot Mills are partially filled with pepper at the factory in France as part of final assembly and testing.
  • The pepper mechanism is equipped with a helix-shaped double row of teeth that guide and hold the peppercorns for a perfect grind. It has a patented treatment that protects the steel from corrosion while maintaining its sharpness and wear resistance.
  • Releases maximum flavor and aroma by first cracking each peppercorn before it is ground.
  • Classic grind adjustment: turn the top knob tighter (clockwise) for finer grinds.
  • looser (counter-clockwise) for coarser grinds.
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock

JAINGU 1pc T Slot Milling Cutter 4-12mm Shank 4 Flute Carbide End Mills for Metalworking T Slot Keyseat Router Bits CNC Milling Cutter-1pc 6x2x3x9.5x50

  • Package Including:1pc 4 Flute T Type End Mills.
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock