ReviewsVariable Speed V belt

TACKLIFE Classic Belt Sander 3 ×18-Inch with 13Pcs Sanding Belts, Bench Sander with Variable-speed Control, Fixed Screw Clamps, Dust Box, Vacuum Adapters, 10Feet(3M) Length Power Cord - PSFS1A

  • ...o free your hand, providing more convenience and flexibility..
  • ▲【13Pcs Sanding Belts】 Come with 6pcs 120 grit and 7pcs 80 grit aluminum oxide sanding belts, saving your money, meeting the requirements for your different projects. Metal clamping lever for easy and quick sanding belt change..
  • ▲【Power & Variable-Speed Design】5 Amp motor offers great power to the sanding surface, delivering efficient removal and high quality finish. Variable-speed knob with 6 dials enables you to match the best speed to the application from 0-560rpm..
  • ▲【High Performance Dust Collection System】The dust collecting box is detachable, can be easily installed and removed, easy to clean dust. Two vacuum dust adapters, 32mm and 35mm make it possible to connect your vacuum cleaner, reaching the perfect dust collection effect..
  • ▲【Notes & Full Package】When meeting the problem that the belt slipping, adjust the screw at the bottom to a proper position, then the belt will run in track. Full package: Tacklife PSFS1A belt sander.
Check Stock

Beleeb 20Amp Variable Transformer Auto AC Voltage Regulator Power Supply, 2000VA Max, 0~130 Volt Output

  • a variable AC input to a transformer input DC bridge rectifier to produce a variable output.
  • The adjustable voltage transformers does not convert AC to DC. It requires an AC input and the output is also AC. Also, the unit will not affect the cycle rate from the power company. If your power system is providing 60Hz, the Variac auto transformer will not change that, the ouput will be an undistorted 60Hz. This unit is rated up to 20 Amps or 2KVA Peak (16A Continous)..
  • Power: 2000VA,Input voltage: 110V, Input current: 18A, Output voltage: 0-130V, Rated output current: 15.38A (Continuous operation for 2 hours, 003c10A can work continuously.
  • This variable transformer is the perfect speed controller. The speed is infinitely variable, and because a transformer doesn't chop up the AC waveform like electronic speed controllers do, there's no noise, humming, etc..
  • If you're planning on using this as an "industrial" or bench-top supply with heavy loads, I'd recommend examining the brushes and adjusting the spring pressure on the windings. This can improve performance by reducing brush-contact sparking. Otherwise, this device is ready to work right out of the box..
Check Stock

Powermatic DDS-225 Drum Sander, 5 HP, 1PH 230V (1791290)

  • Quick disconnect smooth sweep 90-Degree 4-Inch dust port.
  • Motor input power: 1-1/2 HP 110V single-phase 10.5A.
Check Stock

PSI Woodworking KWL-1218VS Turn Crafter Commander 12\ Variable Speed Midi Lathe

  • KWL-1218VS replaces TCLC12VS. ETL Listed and certified by Intertek..
  • Powered by 1hp Variable Speed high performance induction motor(120V-60HZ) & an SBC microprocessor. Two belt positions: 500-1800 RPM & 1950-3800 RPM..
  • Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 12". Cast iron base..
  • Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles..
  • See Description below for all of the included parts..
Check Stock

Pentair Mastertemp 300K Btu Heater 460734

  • Variable speed technology costs significantly less to operate. Savings based on variable speed pump compared to a single-speed pump running 12 hours per day at an average of $0. 16 per kWh in a 20, 000 gallon..
  • Ideal for standard pools requiring up to 1. 5 hp pump.
  • Real-Time clock with 24-hour memory retention.
  • Simple, intuitive user interface is easy to program and operate.
  • easy to access electrical connections for simple installation.
  • Three operating speed settings plus override capability.
Check Stock

Wood Drill Press Bores One Hole at Fast Speed

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Wood Drill Press Bores One Hole at Fast Speed

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Milwaukee M18 FUEL 3" x 18" Belt Sander - No Charger, No Battery, Bare Tool Only

  • Compatible only with 3” x 18” sanding belts..
  • Variable Speed Dial provides a belt speed range from 1350SFM to 750SFM (Surface Feet per Minute) for greater control of the removal rate in application..
  • The tool-free belt change lever allows for quick belt changes to minimize downtime between sanding belt changes..
  • Automatic belt tracking technology keeps the sanding belt centered on the drive rollers for straight alignment..
  • Tool-free belt tracking knob allows the user to adjust the sanding belt from left to right across the platen..
Check Stock

Hayward VVX3000CKITWH Pool Vac or Navigator V-Flex Variable Vane Turbine Upgrade Kit Improves Large Debris Cleaning and Energy Efficiency

  • IMPROVE YOUR POOL CLEANER: Upgrade your PoolVac or Navigator suction cleaner with this V-Flex variable vane turbine technology.
  • HANDLES LARGE DEBRIS: Improved handling of larger debris provides virtually clog-free cleaning.
  • FEATURES: Kit includes V-flex Turbine kit, bearing-free A-frame kit, 4 replacement shoes, 2 replacement wings, and a suction inlet.
  • MAXIMIZE SUCTION POWER: Energy-efficient design maximizes suction power at almost any flow rate.
  • WORKS WITH VARIABLE SPEED PUMPS: Great cleaner companion to variable-speed pool pumps.
Check Stock

Pentair SuperFlo® VS Variable Speed Pool Pump, 342001

  • Variable speed technology costs significantly less to operate. Savings based on variable speed pump compared to a single-speed pump running 12 hours per day at an average of $0. 16 per kWh in a 20, 000 gallon..
  • Ideal for standard pools requiring up to 1. 5 hp pump.
  • Real-Time clock with 24-hour memory retention.
  • Simple, intuitive user interface is easy to program and operate.
  • easy to access electrical connections for simple installation.
  • Three operating speed settings plus override capability.
Check Stock

Makita 9032 4.4-Amp 3/8-Inch Variable Speed Belt Sander

  • Compact design for sanding in close quarters.
  • 8.2 feet power cord for increased maneuverability.
  • Variable speed control dial (980-5,600 ft./min.) enables user to match the speed to the application.
  • Adjustable sanding arm pivots 100° for hard-to-reach areas.
  • Easily adjustable belt tracking with a turn of a knob.
  • 3 different size arm assemblies and belts available (1/4″”, 3/8″”, 1/2″”) for increased versatility.
  • Electronic speed control dial (980 – 5,600-Feet/min.).
  • Adjustable sanding arm pivots 100-Degree for hard to reach areas.
  • 3 different size arm assemblies and belts available (1/4-Inch, 3/8-Inch, 1/2-Inch) for increased versatility.
Check Stock