ReviewsVarious Spec

Wastegate Spring Large Blue Compatible with Tial 38mm 40mm 41mm F38 F40 F41 1.0Bar / 14.7PSI

  • Outlet (spec): Discharge Flange Counterbored for 1-3/4" OD Tubing.
Check Stock

Magpul M-LOK Polymer Picatinny Accessory Rail, 3 Slots

  • Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc..
  • Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
  • All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included..
  • 3 usable slots and a max overall length of 1.6"..
Check Stock

SCIGRIP Weld-On #4SC Adhesive 1/4 Pint and Weld-On Applicator Bottle with Needle

  • Working Time: 20 minutes Fixture Time: 2 hours Shelf Life: 1 year.
  • Meets the requirements of California South Coast Air Quality Management District (SCAQMD) Rule 1168..
Check Stock

mlock Picatinny Offset Rail Mounts Aluminum 45 Degree Adapter Combination for Flashlight Laser Sight Optics for mlok 3 Packed

  • inlucde 3 pcs different mlock offset rail for mlok rail.
  • 3 packed Offset Light/Opitc Picatinny Rail Mount for mlok screws.
  • The rail is perfect length and the mlock screw lock and hold perfectly!.
  • Offset Rail Mounts Attach to various 1913 Picatinny spec rail-mounted accessories, Such as Flashlights, Red Green Dot Sights, Scopes, Optics, Sling Mount, Iron Sight, Lasers Beveled ends and corners to reduce snagging and sharp edges, all hardware necessary for Slots is included.
Check Stock

HooGou Polymer Rail Section Kit for MOE Hand Guards

  • ✔ Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
  • ✔ Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc..
  • ✔ Available in four lengths, so you can position just enough rail area exactly where you need it for each accessory.Rails come in L2 Size (5 Slots)L3 Size (7 Slots) L4 Size (9 Slots) L5 Size (11 Slots) 4pcs set..
  • ✔ Screws and everything you need included. Screws are metal..
  • ✔ Product enjoy after sale guarantee, any questions please feel free to contact us, we do our best for our customers..
Check Stock

Magpul M-LOK Cantilever Rail/Light Mount, Aluminum

  • Designed for use with all M-LOK mounting surfaces.
  • Allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings.
  • Picatinny slots extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses.
  • Keeps lights and accessories low to reduce the firearm's profile.
  • All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
  • 3 MIL-STD-1913 Slots, max overall length of 3.15 in.
  • Available in either heavy-duty reinforced polymer or milspec-anodized aluminum.
Check Stock

LimbSaver Snap-On Recoil Pad for 6-Position Adjustable Stocks, Black

  • Snaps onto most 6-position mil-spec style tactical stocks.
  • Reduces muzzle jump allowing for faster target re-acquisition.
  • Non-slip surface helps keep rifle securely positioned against your shoulder.
  • Semi-flexible material is designed to snap over tactical stocks.
  • Sizing information: For 6-position tactical stocks measuring around 5.14" x 1.84" at butt end. Stock must have 1/4” step-down for pad to snap on. This pad is NOT designed to work with Magpul or other non-mil-spec or non-mil-spec style stocks without a 1/4" step-down..
Check Stock

TOUGH-GRID Backbone TM Paracord Rifle Sling - Gun Sling/Rifle Sling - Handmade in The USA with Authentic Mil-Spec 750lb Type IV Paracord and Mil-Spec Swivels BackBone70BLBoa

  • MIL-SPEC PARACORD - BackBone slings are made with 750lb Mil-Spec paracord! That's 200 lbs stronger than any other sling on Amazon..
  • MIL-SPEC SWIVELS - Our rifle slings come with a Mil-Spec (Military Grade) swivel on both ends… The vast majority have cheap, flimsy swivels!.
  • TONS OF PARACORD - Depending on the length, you'll get anywhere between 75 and 125 feet of paracord that will come in handy in any survival situation!.
  • SIZED TO FIT - Our slings are 36", 46", or 54" long... This provides an excellent size for any style of shooter and rifle..
  • MADE IN USA - All of our slings are HANDMADE in the USA with unquestionable and 100% guaranteed quality. You won't find anything better!.
Check Stock

CRUSHUNT M-Lok Rail Section 5,7,9,11 Slot Polymer Picatinny/Weaver Rail Fits M-LOK

  • Polymer 1913 Rails come in L2 Size (5 Slots)L3 Size (7 Slots) L4 Size (9 Slots) L5 Size (11 Slots) 4pcs Black set..
  • Designed for use with and Forends, the Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories.
  • Available in four lengths, so you can position just enough rail area exactly where you need it for each accessory..
  • Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
Check Stock

TSLA Men and Women Thermal Fleece Skull Cap, Winter Ski Cycling Under Helmet Liner, Running Beanie Hat, Skull Cap Galaxy, One Size

  • TSLA Winter Balaclava Series Geared for any weather and seasons..
  • [Size Spec] ONE SIZE FITS ALL. ** 1 or 2 piece(s) in one pack **.
  • [Materials] Mix of Polyester & Spandex that stretches to match any size without losing shape and excellent moisture-wicking, breathable, and lightweight..
  • [Thermal Fleece Lining] Soft inner lining is for warmth and heat retention..
  • [Multi-Functional] Various ways to wear such as a cycling cap, skull cap, helmet liner, etc..
Check Stock

linda-nice Outdoor Sports 6.7'' Aluminum Quad Drop Tested (Black)

  • ✔ Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
  • ✔ Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc..
  • ✔ Available in four lengths, so you can position just enough rail area exactly where you need it for each accessory.Rails come in L2 Size (5 Slots)L3 Size (7 Slots) L4 Size (9 Slots) L5 Size (11 Slots) 4pcs set..
  • ✔ Screws and everything you need included. Screws are metal..
  • ✔ Product enjoy after sale guarantee, any questions please feel free to contact us, we do our best for our customers..
Check Stock