ReviewsVentilation Fittings

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ☑PART NUMBER: Cenipar Dryer Vent Hose- Flexible Aluminum Foil Ducting Vent Hose(4 inch 8 feet) with 1 X 8 in Flexible Aluminum Foil Ducting Vent Hose&2 X metal Clamps. Cenipar STV-90 Drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTu....
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

4 Inch Metal Tee Cap - Round Vent Cover - Indoor and Outdoor Pipe Cover - Dryer Vent Cover - Dryer Duct End Cap - 4In Metal End Cap - Metal Plug 4Inch - Round Metal Duct Cap

  • The cap is used at the end of tubing as a cover to fit over pipe fittings.
  • Manufactured from high quality galvanized metal.
  • Easy and fast installation - just push the cap in the pipe.
Check Stock

Scepter 08590 Neptune Portable 3 Gallon Marine Fuel Tank For Outboard Engine Boats, 17-Inches x 11-Inches, x 8-1/2-Inches, Red

  • EASY TO TRANSPORT – Portable 3-gallon marine fuel tank with dual molded top handles easily transports from dock to small fishing boats, dinghy’s, and other small vessels.
  • COMPACT DESIGN – Molded-in feet keep tank off floor for increased ventilation and stability while slim profile makes for convenient under-seat storage.
  • 2-WAY VENTED CAP – Automatic air inflow valve system allows air to enter tank during operation and pressure to be released above 5 PSI.
  • DURABLE CONSTRUCTION – Crush-resistant design made of UV-stabilized, rust and corrosion-resistant HDPE for maximum durability.
  • CONVENIENT CONNECTION: Accepts standard 1/4 NPT marine tank fittings for easy fuel line connections.
Check Stock

Bimini Top 3-Bow/4-Bow Stainless Steel Boat Jaw Slide Cap Eye End Deck Hinge Fittings Hardware 16 Set 1 Inch

  • 4 BOW and 1'', Round Tube Bimini Top Kit with Stainless Steel Fittings.
  • 8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings.
  • Package : 16 Pieces in 1 Set, (WHAT YOU GET:8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings).
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

MX Bimini Top Fitting Hardware Set Fit 7/8',Boat Jaw Slide,Cap Eye End,Deck Hinge(6pcs)

  • Bimini Top Fittings Hardware Set Black Nylon 6 PCS.
  • 7/8 inch tube bimini top fittings hardwares set.
  • Bimini fittings set included: 2 pcs nylon eye end cap fittings, 2 pcs nylon jaw slide fittings, 2 pcs nylon deck hinge fittings with screws..
  • Bimini top hardware made of durable black nylon.
  • The bimini top fitting kit easy to install,very convenient.
Check Stock

Tangkula 52 Inches Acacia Wood Patio Bench, Wood Dining Bench with Slatted Seat, Patio Backless Bench for Garden Backyard Poolside Balcony, Ideal for Outdoors & Indoors (1, Teak)

  • ...yle & Practical Design: With natural teak color and wood-textured surface, the bench will be a good complement to your home and matches your furniture well. The bench is great for casual seating and is suitable for various outdoor or indoor places such as your patio, backyard, garden, hallway and dining room..
  • Great Ventilation & Easy to Clean: The slatted seat of this bench makes for better ventilation. Meanwhile, it can prevent water from accumulating which enhances lifespan of this bench. In addition, with the smooth and waterproof surface, the wooden bench is easy to clean with a damp cloth..
  • Easy to Assemble & Dimensions: The necessary fittings and instructions are included so it is very easy and quick to assemble the bench. You can complete the assembly in a short time by following the instructions. Bench dimension: 52” (L) X13.5” (W) X17”(H), max weight capacity of bench: 700 lbs..
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ☑PART NUMBER: Cenipar Dryer Vent Hose- Flexible Aluminum Foil Ducting Vent Hose(4 inch 10 feet) with 1 X 10in Flexible Aluminum Foil Ducting Vent Hose&2 X metal Clamps. Cenipar STV-90 Drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 10 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on You....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ☑PART NUMBER: Cenipar Dryer Vent Hose- Flexible Aluminum Foil Ducting Vent Hose(4 inch 8 feet) with 1 X 8 in Flexible Aluminum Foil Ducting Vent Hose&2 X metal Clamps. Cenipar STV-90 Drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTu....
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock