ReviewsVertex 3d Printer Bed Cover

Creality Ender 3 Pro 3D Printer with UL Certified Power Supply Removable Build Surface Plate Resume Printing Function Free Filaments & Nozzles FDM DIY 3D Printers 32bits Mainboard 220x220x250MM

Resume Printing Function: This Creality Ender-3 Pro 3D Printer supports resume printing from the last recorded extruder position after suffering unexpected power outages or your stopping printing. Ensuring excellent printing effect & use experience for you..
Removable Magnetic Hot-bed Surface: The Ender-3 Pro 3D Printer is assembled with removable magnetic hot bed surface for good adherence and easy removal of models. No need to spatula or razor models after printing..
32-bit Motherboard: The Printer is equipped with Advanced built-in 32-bit motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect..
Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle & 50-60 degree of hot bed for using PLA/ ABS Filament, 245 degree of nozzle & 60-65 degree of hot bed for using TPU/PETG Filament..
Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!.

Check Stock

CR Touch 2023 Upgrade Noiseless Auto Leveling, with Beginner Software Pack, Creality 3D Printer Bed Leveling Sensor Kit for Ender 3 Pro/ Ender 3 V2/ Ender 3/ Ender 5/ Ender 5 Pro

【Suitable for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers】The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer...
【Independent Development】Compared with traditional BLTouch or 3D Touch, CR Touch is upgraded to a metal probe with noise-reducing silicone ring. 360° translucent protective shell makes CR Touch safer and more exquisite. Positioning accuracy ≤0.04mm, Automatic detection and leveling, can be reused for over 100,000 times..
【Strong compatibility】CR Touch 3d printer auto leveling, Compatible with PEI / sticker bed / glass bed / metal bed.
【Easy to install and easy to use】An SD card comes with our product, which contains all you need for the installation, so that the CR Touch is a plug-and-play upgrade part for your 3D printer..
【After-sales Service】If you encounter unsolvable problems during installation and use, feel free to contact us, the technologist will provide you with detailed solutions within 24 hours..

Check Stock

Doodler

ADVANCED 3D PRINTING: The Dremel Digilab 3D45 Idea Builder 3D printer is one of the best 3D printer options for printing advanced materials. It is....
BEST IN CLASS: The winner of PCMag.com’s 2022 Editors’ Choice Award for Best 3D Printer for Professionals and Small Businesses, a Google For....
EASY TO USE: Our guided setup process gets you from unboxing to printing in just a few minutes. The 4.5 inch full color touchscreen has an intuitive....
TOP RATED FEATURES: Features include an automated 9 point leveling sensor that detects any variation in the print bed and automatically accounts for....
THE DREMEL STANDARD: With over 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey.....

Check Stock

Creality TPU 3D Printer Filament 1.75 mm - Black | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance ±0.02 mm | Fit Most FDM Printers (1 Pc/Pack)

SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – Black | Dimensional Tolerance +/- 0.02 mm | Shore Hardness: 95A | Speed: 20-60mm/ | Recommended Nozzle Temperature: 215-235 ℃ | Recommended heat bed settings: No heat/ 60-80℃.
MATERIAL - With outstanding bed adhesion, no heated bed requirements, minimal warping, and abrasion resistance much higher than any other standard printing material, the uses and possibilities that TPU uncovers have revolutionized 3D printing for people around the globe..
UNIQUE FEATURES - Creality TPU 3D Printer filament is Soft adhesive with high elastic, Chemical resistance and environmental resistance, Waterproof and moisture proof and Environmental protection. The printing model is resistant to wear and scratch, with good aging resistance..
FIT MOST FDM PRINTERS - Creality TPU 3D printer filament is compatible with all FDM printers of Creality 3D, and you can create your artwork with this filament of high quality in just a few simple steps..
CHEMICAL RESISTANCE - TPU 3D Printer filament have Excellent chemical resistance (water resistance, oil resistance, solvent resistance) and environmental resistance, environmental protection, and nontoxic..

Check Stock

Amazon Basics PETG 3D Printer Filament, 2.85mm, White, 1 kg Spool

3D printer filament (2.85mm diameter, white.
designed to fit most common 3D printers (check spool size for compatibility).
Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS).
offers easy bed adhesion, stiffness, and a glossy-type finish.
resealable storage bag included to protect filament between use.
keep filament dry and away from UV light.
Backed by an AmazonBasics 1-year limited warranty.
Please make sure your printer supports 2.85mm filament before buying this filament. This filament is supported on all 2.85mm open standard 3D printers. Verify your printer before purchasing to avoid unnecessary returns..

Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

【Intelligent Detection】Crealtiy CR Touch adopts multi-point detection intelligent compensation technology. CR touch is an automatic leveling accessory for 3d printer platform independently developed by Crealtiy. It is more stable than the traditional BL touch leveling function, and you can get better quality with less money product upgrade..
【Strong Compatibility】CR Touch 3d printer auto-leveling is compatible with all printing platform materials such as PEI/sticker bed/glass bed/metal bed, etc. No matter what kind of printing platform material you use, it can adapt and work stably..
【Longer Service Life】 Crealtiy CR Touch has been upgraded to a metal probe, which is more durable and can reduce the wear caused by daily use, thereby greatly increasing the service life of the probe, 0-6mm extension length, 0.04mm repeat positioning accuracy, automatic leveling , can be reused more than 100,000 times..
【Compatible Models】This kit includes 3 different mounting brackets and extension cables. You can install it easily, and it can be adapted to more Crealtiy 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7....

Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....

Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....

Check Stock

MINGDA Removable Magnetic Build Plate Flexible Heatbed Mat 235x235mm for 3D Printer Hot Bed Platform

【PACK of 4】The 220mmx220mm (8.7" x 8.7") 3D Printer build plate is fully matches heated bed for large format printers such as the Creality MK2,....
【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature....
【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides....
【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible....
【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer a 90 day money back guarantee!.

Check Stock

Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm

Compatibility: Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer’s platform firstly..
No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed..
Super Convenient: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools..
Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing..
High Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. Glass bed’s hardness is up to 8 Mohs and is capable to work up to 400 ℃. Using alcohol or acetone to wipe it after repeated use..

Check Stock

Voxelab Aquila 3D Printer,Fully Metal Frame,DIY FDM 3D Printer Kit with Removable Carborundum Glass Platform,Fully Open Source Design and Resume Printing Function Build Volume 220x220x250mm

【Integrated Structure & Semi-assembled】:Fully metal frame design which sturdy and durable,users can quickly install according to the instructions....
【Fast Heating & Resume Printing】: Voxelab Aquila 3d printer comes with a tempered glass plate on the heated bed, greatly resolving warped bed....
【Upgraded Silent Mainboard 】Voxelab aquila 3d printer comes with upgraded silent Mainboard , allowing for quieter and more precise printing....
【Fully Open Source】Aquila is a fdm printer based on open source technology. It allows users to improve their printer upon the source code and....
【Warranty and Service】: All Voxelab 3d printers are provided lifetime technical assistance and 12-months warranty. if you have any question please....

Check Stock