ReviewsVertical Lift Check Valve

K2 Pumps IRP15001K 1-1/2 HP Sprinkler Pump Dual Voltage

• Ideal for sprinkler zones, drawing water from a lake or pond, or moving large volumes of water.
• Constructed of corrosion-resistant, reinforced thermoplastic. Self-priming after pump is initially filled..
• Moves water at 47 GPM at 0' of lift with maximum lift of 20'.
• Heavy-duty, 115/230V dual voltage motor, preset at 230 volts.
• 1-1/2" NPT Suction and Discharge size. Requires a check or foot valve, sold separately..

Hydro Master Plastic Sump Pump Check Valve with Stainless Steel Clamps for 1-1/2 inch or 1-1/4 inch

• 1-1/2" or 1-1/4" Slip-on check valve for most sump pumps.
• Made of strong ABS body and EPDM rubber on both ends to prolong service life.
• Stainless steel 301 clamps and fasteners for corrasion and rust resistance.
• Can be installed vertical or horizontal, but vertical would be best.

Comp Cams K54-412-11 XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

• Good torque and very strong mid-range power. Good performance cam..
• 212/218 Duration at .050". 114 Degree Lobe Separation Angle. 0.522"/0.529" Valve Lift.
• K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, decals and instructions. Check description for more accurate listing of kit contents..
• Low End Grunt and High RPM Potential - Designed with Xtreme Energy technology to provide excellent power with the LS engine's enhanced cylinder head design..

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

• Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
• 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
• 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
• Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
• Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.

ENTP: metric IWCF and reminder

• High-quality Material: The submersible well pump comprises 304 stainless steel and a built-in check valve, rust-proof and corrosion-proof. You can get our durable and sturdy pump for a long time use..
• Super Large Head & Flow: Powerful flow of the deep well pump can achieve 42 GPM, and the head can reach 440 ft. More convenient and efficient to use water. Heavy-duty thermoplastic impellers are designed to provide large flow and high lift..
• Premium Filtration Mesh: The filtration mesh of a submersible pump is made of stainless steel to filter impurities. You can add a layer of gauze in front of the filtration inlet for a new drilled well with excessive granular sediment..
• Excellent Performance: The submersible water well pump is designed with a built-in check valve, which can be mounted vertically and is suitable for home use. The hermetically sealed motor is thermally protected to prevent overheating..
• Various Application: This submersible pump for a deep well is suitable for extraction from the deep wells for groundwater and uses in rivers, reservoirs, canals, and other water l....

VEVOR Air Jack, 5 Ton/11000 lbs Triple Bag Air Jack, (Blue) & Air Jack, 3 Ton/6600 lbs Triple Bag Air Jack, Air Bag Jack Lift Up to 15.75 Inch, 3-5S Fast Lifting Air Bag Jack (Blue)

• ...jack capacity: 6600 lbs/3T. And it's lifting Height Range: 5.9''-15.75''. It just takes 5 seconds to lift. Working Temp: -60℃~ 50℃..
• Product 2: Heavy Duty Construction: The pneumatic jack is made of high strength steel that makes the whole body sturdy and durable. The solid construction also provides lateral and vertical stability..
• Product 2: Portable Handle: There is a folding handle equipped in this airbag jack, which can be adjusted to three different positions to make the jack easy to use..
• Product 2: Easy to Use: The airbag jack is powerful and very fast to use. The triple bag jack is the easiest and fastest way to make the car lifted. It inflates with compressed air..

AIR JORDAN 1 Retro High Og Royal Toe 9

• Self-Priming up to 12 Vertical Feet [3.7M].
• Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid.

Dixon SWCV300 Brass Horizontal Swing Check Valve 3 NPT Female

Aqueon QuietFlow Air Pump Black 10

• Rubberized base lessens residual pump noise.
• Each air pump includes replaceable check valve, diaphragm and dust filter pad.
• Single vertical hose outlet for keeping hose kink-free.
• Repair kits sold separately to replace internal air pump components.

Shurflo 2088-514-144 Pump

• Self-Priming up to 12 Vertical Feet [3.7M].
• Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid.

Hood and Trunk Lift Support Gas Struts Fit for Chrysler 300 2005-2008 TUPARTS Automotive Replacement Shock Lift Supports

• ONLY FIT - Gas lift supports for Chrysler 300 2005 2006 2007 2008.
• Replace Reason - The hood or trunk won’t stay up?Some valve oil has leaked out of one of the ends?It could be old or defective, but regardless of....
• Working S-mart - Get new lift supports shocks to instead of holding up your hood or trunk with one arm while trying to work on the car with the other....
• Precise Technology - The TUPARTS gas spring shocks lift support are made of precise technology with durability and corrosion resistance,avoiding fuel....
• Tips - Please check year/make/model of your vehicle by the part finder tool on the top left corner to confirm compatibility before purchase.Please....