ReviewsVertical Shaft Kiln

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with Honda, Ryobi, Simpson, Craftsman Homelite and More

  • OEM replacement pump for your pressure washer: Fit most 7/8" shaft vertical gas pressure washer engines. Compatible for Craftsman, Subaru, Homelite, Ryobi, Honda, Husky and more. This easy-to-install kit is great for power washers that can support up to 3000 PSI at 2.5 GPM to wash cars, sidewalks, fences, vehicles, and more..
  • Easy start & maintenance-free: This pump pre-fill oil for lifetime, so you never have to change the oil. It is also manufactured from fully die-cast aluminum for good against corrosion. If the pressure washer is not used for a long time, we recommend that you uses a anti-freeze and lubricant formula, for use before extended storage and prior to startup the following season to keep your pump running on full blast..
  • Easy installation: This replacement pump features a threaded M22 connection pressure washer hose outlet, 3/4'' NH garden hose inlet. The standard bolt pattern fits most 7/8'' vertical shaft gas-powered pressure washers. Packet includes a chemical hose with filter, mounting bolts, shaft key, and instruction booklet to get your pressure washer back in life within 10 minutes. (*Fit 7/8'' vertical shaft engines ONLY).
  • A high-quality thermal relief valve is matters: It protects the pump from overheating while in bypa....
Check Stock

Martin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SH 32MM Quick Disconnect Bushing, Sintered Steel, Metric, 32 mm Bore, 47.52 mm OD, 33.33 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 35MM Quick Disconnect Bushing, Sintered Steel, Metric, 35 mm Bore, 55.54 mm OD, 46.03 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SF 11/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 0.68\ Bore, 3.125\ OD, 2.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SD 15/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 0.93\ Bore, 2.187\ OD, 1.81\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 1 15/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1.94\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 5/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1.31\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock