ReviewsVertical Turning Center

StoreSMART - Flip Chart Easel Binder - Portrait/Vertical - Black- 3-Pack - VH430-3

  • Designed specifically to work with StoreSMART's Vinyl Sheet Protectors for Vertical Flip Chart Easel Binder (VH1430)..
  • Includes three 1" binder rings. Rings are 2 3/4" apart on center..
  • Opens and closes normally. Just flip it around to form a stand-up easel..
  • Inside capacity: Fifty 8 ½" x 11" sheets..
  • Opens and displays information in the vertical/portrait position..
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...ivided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automatic start, delay automatic start.❥Indexing function: you can switch the direction of turning tool through "DIR" button.❥Angles can be cleared with one click.Control panel set parameters after saving and start can realize reciprocating turning function and turning thread..
Check Stock

Rockwell Delta 11' Wood Lathe Spindle Bearings Set of 2, SP-5360, Later 46-111 Models

  • Brand new wood lathe live center and spur center.
  • Enjoy true accurate wood turning on your wood lathe with no messy lubricants to stain or burn your project.
  • Please, check your part number before purchase.
  • Follow the safety guidelines when installing parts.
Check Stock

TEXALAN Heavy Duty Live Tailstock Center #2 Morse Taper

  • Size: #2 Morse Taper Cone is 2-1/2" by 1-11/16" overall diameter.
  • Application: Precision ball bearings for smooth, balanced turning. Ideal for many turn-between-center woodturning projects.
  • Note: Place rear taper end on the tail stock and the opposite end in the center drill hole.
  • We recommend applying lubrication oil to bearing prior to....
  • Sturdy: Alloy steel shaft construction for ultimate strength and longevity.
  • Packing： Shipped in Protective case for storage.
Check Stock

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

  • Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
  • This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
  • No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
  • No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
  • Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....
Check Stock

Pen Mandrel Woodworking Pen Turning Mandrel Parts Woodworking Steel Pen Mandrel Saver Mechanical Accessory Tool Taper Shank #2 Morse Taper

  • Appropriate for many lathes: each wood turning pen mandrel is 7.95 inches in total length, 6 mm/ 0.24 inch in diameter, which is acceptable for most....
  • An adjustable tool: the package includes 1 useful woodworking pen mandrel saver with fine polished, the length of the shaft can be adjusted at will....
  • Firmly use: the mandrel for lathe is made of quality steel material, tough and sturdy, wear resistant and high temperature resistant, which can help....
  • Flexible to use: pen turning accessory is equipped with a bushing that can protect the mandrel from scratches, which can be moved easily and flexibly,....
  • Versatile uses: the lathe mandrel is designed for producing pens, with fine workmanship, which can reduce the off center turning, improving your work....
Check Stock

Dynabrade 50303 4-1/2-Inch-5 Inch Vertical Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Vertical, 12 hp, Side Exhaust, 12,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 8.25"W x 6.75"H.
Check Stock

DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks

  • LOCATE AND DRILL PEN BLANK CENTERS: The DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks vertically holds and centers pen blanks up to 1.5 inches (3.8cm) square and makes center drilling of pen blanks a repeatable process that is easy.
  • NO MORE MARKING THE CENTER: Once clamped and centered under the chuck, it is quick and easy to drop in a blank and drill a centered hole.
  • You will appreciate not having to mark the center on each blank.
  • EASY SETUP: Unique support and threaded design that makes setting up the jig a simple one-time process.
  • There is no need to change the setup again to center and drill multiple pen blanks.
  • USE YOUR TOOLS: Use this vise with your existing drill press to drill a perfect center hole for the brass tube before putting the blank on a mandrel for turning on a lathe.
  • VARIOUS APPLICATIONS: Will hold both square and rectangular pen blanks up to 1.5 inches (3.8cm) square and can also be used for other applications such as wine stopper projects.
Check Stock

New 2700 psi Pressure Washer Pump Replaces AR RMW2.2G24

  • FITS MANY BRANDS SUCH AS KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA, POWERSTROKE, and OTHERS!.
  • 2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8" and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE.
  • SPECS: FITS 7/8" Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES.
  • MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4" - CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16" – 6 3/16" - 6 7/16".
  • Please Compare The Picture With Yours Before Purchasing..
Check Stock

2800 psi POWER PRESSURE WASHER WATER PUMP Troy-Bilt 020245 020245-0

  • FITS MANY BRANDS SUCH AS KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA, POWERSTROKE, and OTHERS!.
  • 2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8" and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE.
  • SPECS: FITS 7/8" Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES.
  • MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4" - CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16" – 6 3/16" - 6 7/16".
  • Please Compare The Picture With Yours Before Purchasing..
Check Stock