ReviewsVertical Type Check Valve

Dixon SWCV300 Brass Horizontal Swing Check Valve 3 NPT Female

TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..

APPLICATIONS: ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment.
galvanized steel "quick install" wall mount bracket.
rubber feet for vibration noise dampening.
INCLUDES OVERFLOW DETECTION SWITCH: dual function NO and NC operation.
shuts off equipment or can be attached to audible or visual alarm or security system.
AUTOMATIC OPERATION: vertical centrifugal pump design activates when condensate reaches 2.2 inches.
shuts off when condensate falls to 1.6 inches.
SPECIFICATIONS: 1/30 HP, 115 Volts, 60 Hz., 1.5 Amps, 93 Watts, 3/8-inch discharge, check valve included, 84 GPH at 1-ft. lift, 21 ft. shut-off, maximum 9.1 PSI.

THIS IN-LINE check valve can be used to keep your pump primed, increase pump lift or prevent backflow.
SUITABLE for use with manual or electric pumps. Must use hose clamps or PVC fittings.
HOSE FITS 1 inch or 1-1/2 inch (Stepped Connection). Type: Check Valve.
FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet..
2.MEASURE TWO SIZE: This item is only applicable to 2.56"-2.95"(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be....
3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank.
4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10....
5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve..

used in delivery and transfer of liquid applications up to 3 GPM (11.4LPM).
1/2" MPT, 115VAC 60Hz, non-corded 3 wires, built-in check valve prevents back flow of fluid.
built-in pressure switch, turn on/off at 45psi, adjustable pressure setting.

This 3/4″ water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the back flow of water through the circulation pump once the jet pump is activated.
Works on Tiger River Spas, Hot Spring Spas, and Limelight Spas..
All water check valves have arrows stamped on the outside to indicate the direction of flow which should be pointer towards the circulation pump..
Troubling Shooting: The symptoms of a non-operative check valve are.
* Water Leak – If water is leaking from around the check valve, it should be replaced. * Rattling – A rattling check valve indicates that water is not being allowed to flow properly past/ through the check valve. * Verify the check valve is installed with the flow in the correct direction. * Heater High-Limit Tripping – Poor water flow through the check valve could lead to heater high-limit tripping. Ensure the check valve is n.

Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
Working Pressure 200 WOG,Port Types:Female x Female threaded.
Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..

★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..