ReviewsVfd Ac Driver

Southwire Tools & Equipment 21550T Clamp Meter with Built-In NCV Tester

  • VFD Mode provides superior accuracy for working on VFD-controlled equipment.
  • Advanced power efficiency and harmonics measuremenets for system level performance analysis.
  • Powerful Worklights no only assist with clamping but are bright enough to serve as a primary worklight.
  • FLIR Tools Mobile connects the FLIR CM83 to your compatible smartphone and table via Bluetooth.
  • METERLiNK technology wirelessly integrates electrical readings on your infrared image with FLIR Thermal Cameras.
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

RS-550s 18v (12v - 20 volts) DC Motor Round Shaft - High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine

  • 【PACKAGE INCLUDE】-1pcs 110V/1.5KW Square Spindle Motor(4.3kg,9.5lbs） +1pcs 110V/1.5KW VFD Inverter +13pcs Collets ER11(1mm-7mm) + 20pcs Drill Bits+ 1meter aviation wire +2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm beyond expectation..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.It includes wire and 2 wrenches to connect spindle motor with VFD.It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/Plastic/Aluminum carving/engraving machine, advertisement engraving machine, CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ...eplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn out Can engrave the high hardness or metal.
  • DESCRIPTIONS】Industrial fit for engraving machine controller was designed system Waterproof design, very durable, anti-dirt, oil spray P....
Check Stock

HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot

  • ۞۞۞【Great Torque and Speed Range】This VFD uses unique control method to realize high moment of force, high accuracy and wide speed regulating driving range.
  • ۞۞۞【Great Adaptability and Stability 】It has good anti-trip performance and ability to adapt to rough power supply, temperature, humidity and disturbance and developed with a large heat sink for better cooling that significantly improves stability.
  • ۞۞۞【Low noise & Low Electromagnetic Interference】By optimizing the PWM control technology and the electromagnetic compatibility, the device runs with low noise and low electromagnetic interference.
  • ۞۞۞【Easy to Use】Easy and convenient to use and wire, wires can be connected by screw terminals.
  • ۞۞۞【Parameters】Suitable Motor Power: 2.2kW.
  • Rated Voltage: single-phase/3-phase AC220V.
  • Size: 18 x12.5 x 12.5cm/7.1 x 4.9 x 4.9in.
  • Weight: 1.3kg(approx.) Weight: 1.3kg(approx.).
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

CNC Router Engraver 4 Axis USB 1.5KW VFD 6040 CNC Engraving Drilling Milling Carving Machine 3D Cutter Desktop DIY Artwork Woodworking With Remote Controller

  • 【ENGRAVER MACHINE PARAMETERS】(Note: When you receive this machine, please contact us to send you the Operation Video and Mach3 Software.] X Y Z....
  • 【CONTROL BOX PARAMETERS】Operating Voltage: AC 110V.
  • Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive.
  • 【PREMIUM MACHINE】The 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can....
  • 【CAN CONNECT WITH COMPUTER】The mini router frame is movable. The machine can connect with computer as other external device such as printer ,....
  • 【WORK WITH VARIOUS MATERIALS】This Engraving machine can work with various materials(metallic & non-metallic), such as: wood, pmma or other....
Check Stock

Litever Under Cabinet LED Lighting Kit Dimmable by AC Wall Dimmer. Plug in or Hardwired LED Driver. Super Bright Linkable Light Bar for Kitchen Cabinet Counter Shelf. 35W 2000 Lumen. Daylight 5000K

  • 【Dimmable by AC Wall Dimmer】--The included LED driver is compatible with most branded in-wall AC dimmers. Smooth Dimming. Flickering-free lighting effects..
  • 【Super Bright】 --35W super bright but even daylight white under cabinet light fixture. Very nice light color. No LED dots. No light glaring..
  • 【Plug in or Hardwire】 --The LED driver is with a removable AC plug. It can be plugged into an outlet connected with your AC wall dimmer. You can also remove the AC plug for direct hardwiring it to your AC wall dimmer..
  • 【Easy to Install】--Slim LED driver with 1 screw hole for mounting. Slim linkable LED light bars and extension cables. Easy to hide. Sufficient self-adhesive pads, mounting clips, wire clips, extension cords will help you to install this under cabinet led lighting kit quickly and easily..
  • 【DIY & Extendable】---Following the “Recommended Layout”, add-on LED light bar, extension cables, 2-way power splitter can be added into this LED cabinet light system. It’s easy to DIY them to work as kitchen under cabinet lighting, above kitchen cabinet lightin....
Check Stock

EDUP WiFi Adapter ac600Mbps Wireless USB Adapter 5.8GHz/2.4GHz Dual Band 600Mbps USB Adapter 2dBi External Antennas Supports Windows XP,Win Vista,Win 7,Win 8.1, Win 10,Mac OS X 10.6-10.13

  • Dual band wireless usb adapter downward compatability 802.11g/n Internet device.
  • 802.11ac Wi-Fi technology and detachable 2dBi omni-directional dual band antenna for increased coverage and stability.
  • Wifi usb adapter up to 600Mbps Wi-Fi speeds on 5.8GHz (433Mbps) and 2.4GHz (150Mbps) bands. Dual band reduces interference for better connections to more Wi-Fi devices, Use Roaming technology, promise high effective wireless connect.
  • most powerful Wi-Fi technology – 3 times faster than wireless N speeds. 5G WIFI Ideal for gaming online and seamless HD video streaming.
  • 2.0 USB Wireless wifi Antennas Support Operation System:Windows XP/Vista/Win7/Win8.1/Win10/Mac OS 10.6-10.13(The newest driver from EDUP site:http://www.szedup.com/support/driver-download/ep-db1607-driver/).
  • Upgrades PCs to 802.11ac, the latest &.
  • Wifi dongle AC600Mbps lifetime warranty Easy to install,driver updates and full technical support in English.(Newest driver link in description or Contact us).
Check Stock

4KW 220V VFD Inverter Variable Frequency Drive Converter Driver Controller 5HP 3-Phase Output 18A VSD with 2m Extension Cable For Spindle Motor Drive Control/CNC Router Engraving Milling Machine

  • Input voltage:single phase or three phase 220V 60Hz.
  • Cable:parcel include 2m extension cable/control panel box.
  • Output Current:18A；this VFD can not install brake resistor..
Check Stock

CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine

  • 【BASIC INFORMATION】-This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm....
  • 【SPINDLE ADVANTAGE 】-It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than....
  • 【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD..
  • 【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock