ReviewsVia Motherboard

Creality Ender 3 V2 Upgrades V4.2.7 Silent Board 32 Bit Silent Mainboard with TMC2225 Drivers Compatible for Creality Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro 3D Printer

NOTE: If you want to install this V4.2.7 silent motherboard on the printer, you need to flash the motherboard firmware to work properly. You can....
Firmware Pre-Installed Only for Ender3 V2 - Marlin 2.0.1 and firmware(not BLTouch version) for Ender-3 V2 comes pre-installed on this board. If your....
Update the Motherboard Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the....
Noiseless - TMC ultra-slience chip, effectively eliminates noise. Low-decibel operation keeps the motherboard running. Using high-quality MOS tube,....
High Performance - Equipped with STMicroelectronics 32-bit MCU, which brings a new experience. Connect to temperature sensor via smart fanEnable....

Check Stock

EZDIY-FAB NVME M.2 Aluminum Heatsink 12V 4 Pin RGB Cooler for 2280 M2 SSD Heat Sink Tri-Cool with Silicone Thermal Pad

Aluminum Alloy Heatsink with the most heat dissipation designed specially for 1x M.2 SSD 2280 DIY Desktop PC SSD.
Triangular Aluminum fin design, Double-sided cooling design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer..
Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, 980 PRO, etc..
Advancing thermal pad is made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD.
Sync RGB lighting via motherboard:- ONLY works with an RGB(+12V, 4-pin) capable motherboard or an RGB(+12V, 4-pin) controller(Please check the 12V RGB motherboard of your motherboard before purchase!).

Check Stock

upHere 5V 6-Pack 120mm Silent PWM Intelligent Control 5V Addressable RGB Fan Motherboard Sync Adjustable Colorful Fans with Controller T7SYC7-6

Customizable ARGB LED Lighting:With 8pcs of independently programmable ARGB LED lights, provides full lighting for your build, achieving magical....
Optimized Cooling Performance:Balanced airflow and air pressure designed for perfect compatibility with your case or cooler..
Blade Design:The unique blade configuration offers a powerful air pressure.Scientific air channel design in the frame reduces noise caused by airflow....
PWM Control:The PWM function allows the motherboard to run the fan precisely at its necessary speed. This assures the required cooling and minimises....
Synchronizable ARGB lighting via motherboard: Sync ready with all 5V 3PIN ARGB motherboard including Gigabytes, MSI, and Asrock.What You Get: T7SYC7-6....

Check Stock

CPU Cooler, 120mm Addressable RGB PWM Fan with 4 Copper Heatpipes, GAMEMAX GAMMA-500-RAINBOW

❄【Effective Dissipating】HDT copper sintered powder heatpipes makes sure high-efficiency heat conducts, 2.5mm fin pitch high penetrability tower heatsink dissipates heat with low speed & noise fan..
❄【RGB Light With Style】Synchronized RGB aluminum housing and fan provide amazing lighting visuals. Rainbow 3pin connector for adapter Controller or SYNC with AURA of motherboard. Software Control via Controller or SYNC with Motherboard..
❄【Friendly Installation】125X125X25mm PWM LED silent fan detachable when cleaning need. Simple and Friendly installation in Intel and AMD system without moving the motherboard..
❄【Wide Application】 Intel/AMD TDP 187W CPU. LGA775/LGA1155/LGA1150/LGA1156/LGA1151/LGA115x. Socket 754/939/940/AM2/AM2+/AM3/AM3+/FM1/FM2/AM4..
❄【After-Sale Service】The 36-month worry-free product experience process will be provided to you and the manufacturer will bear all the responsibility if any product problems happen..

Check Stock

SHANGZHAOYUAN B250 BTC-12P Mining Motherboard (Intel 6th/7th Gen) LGA 1151 Motherboard with 12 PCIe Slots, VGA+DVI, MSATA, 2*DDR4, USB 3.0 for Miner (BTC/ETH/ZEC/ETC)

【Superb Configuration】The Intel LGA1151 6th/7th Motherboard using Intel B250 high-speed chipset, and has stabilized capacitors that can provide a stable voltage for your electrical equipment.
⚡【High Performance】The Mining motherboard 12 GPU is equipped with 2 DDR4 2133/2400/2800/3000 MHZ memory slots, up to 32GB maximum capacity. Support LGA 1151 series 6th/7th generation processors.
【Mine Motherboard】Up to 12 GPUs can be connected via 12 PCI-E interfaces, maximizing your mining connectivity and speed. The B250C BTC Motherboard allows you to fire up your mining efforts.
⚡【High efficiency】Fast startup, loading and file transfer. Effectively reduce interface interference and line loss to ensure data reliability, thus improving efficiency..
【Exclusive for Mining】Quiet, low power consumption, low heat generation, energy-saving, safe and reliable, effectively helping to mine Bitcoin (BTC), Ether (ETC) and any other cryptocurrencies.

Check Stock

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..

Check Stock

Thermaltake V200 Tempered Glass RGB Edition 12V MB Sync Capable ATX Mid-Tower Chassis with 3 120mm 12V RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1K8-00M1WN-01

LIGHT UP THE SYSTEM: 3 pre-installed 120mm 12V motherboard sync RGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo) + 1 black fan at back.
BUILT-IN DUAL-MODE 12V SYNC CONTROLLER: Control light via I/O Port RGB Light Button (16 LED modes/7 color) or via 12V header RGB sync motherboard (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo).
16 LED MODES THROUGH I/O PORT RGB LIGHT BUTTON: RGB Mode, Single Color Mode (7 Colors), Breath Mode (7 Colors), Light Off [7 Colors: Red, Yellow, Green, Cyan, Blue, White, Purple].
CLEAR VIEW OF PC GAMING: 4mm thick tempered glass side panel with standard mounting.
BUILT-IN PSU COVER: Cover all your cables for a Professional Look combined with a window to show off your Colorful power.
DRIVE BAYS: 3 x 2.5″ with HDD Bracket + 2 x 3.5″ with HDD Tray.
Supports Mini ITX, Micro ATX, and ATX Motherboard.
I/O PORT: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB Light Button.
OUTSTANDING EXPANDABILITY: 7 expansion slot. Max CPU cooler height: 160mm / Max VGA length: 380mm / Max PSU length: 170mm.
DIMENSION: 17.6″(H) x 8.3″(W) x 17.3″(D), 15.65lb.

Check Stock

Zalman CPU Fan Cooling CNPS2X Red

Dimensions: 84mm(L) x 84mm(W) x 27mm(H) / Weight: 83g / Materials: Pure Copper, Aluminum / Bearing Type: Long Life Bearing / Power Connector: 4-Pin....
Top Down Airflow: The cooler pulls in cool air from directly above the CPU downward to quickly cool the CPU and motherboard. DTH-based (Direct Touch....
Ultra Quiet 80mm Fan: PWM fan allows for automatic speed control via the motherboard, built with long life bearings and noise-elimination technology....
Ultra Flat Profile: The super compact cooler is only 27mm tall and can be mounted in all computer cases, including mini ITX cases, perfect for small....
Compatibility: Intel LGA1156 / 1155 / 1150 / 775.
AMD FM1 / AM3+ / AM3 / AM2+ / AM2. Does not fit AM4..

Check Stock

Thermaltake Pacific RGB Plus TT Premium Edition 6-Pack G 1/4' PETG Tube 16mm OD 12mm ID Fitting Kit CL-W185-CU00BL-A

16. 8 million colors LED - 6 addressable LEDs for customization.
Tt RGB plus software/app - monitor performance, customize lighting effects, and adjust fan speeds.
Lighting schemes - switch between 10 “light mode” (full lighted, sound control, flow, RGB spectrum, ripple, blink, pulse, wave, and thermal) along with 3 'color modes' (RGB, single and off) and 4 'light speeds' (Slow, normal, Fast and extreme) via TT RGB plus software.
Sync with Razer Chroma lighting- experience synchronized gaming and RGB lighting effects with TT RGB plus cooling components and gaming gear via TT RGB plus software and Razer Synapse 3.
Works with Alexa - Control lights, fan speeds, and even check current weather condition by giving verbal command to the Alexa-enabled device.
Motherboard Sync option - with TT Sync controller (P/N cl-o015-pl00bl-a), lighting effect can be controlled by 5V RGB header motherboard RGB software.
Secure design - two pre-installed O-Ring provide an even seal within the inner diameter of hard tubing.

Check Stock

Rosewill 200Mbps Powerline AV Mini Wall-Plug Adapter Starter Kit with 2 Units Upto 200Mbps RPLC-201KIT

With quick and easy installation, RC-508 offers good experience of data transferring via USB 3.0, no matter video, audio or photos.
Multiple USB 3.0 ports, simultaneously enjoy the convenience of plug-and-play, speed up to 5 Gbps.
Suitable for all motherboard with PCI-E bus.
No extra power needed because of built-in 4-pin power connector of RC-508.
Automatically backwards compatible with USB 2.0 and 1.1.
Operating System compatibility: Windows XP/Vista/7/8/10.

Check Stock

SinLoon DB25 to IDC 26 Pin Cable,Motherboard Slot Plate Parallel Panel DB-25 Female to 26 Pin IDC Socket Flat Cable

Product Name: Full copper cable core DB25P female to IDC26P female baffle cable.
IDC26 to DB25 (Parallel). Female to female connection. Perfect for the SmoothStepper, UC400 and other CNC boards.
The DB25 connector also fits directly into the DB25 slot of most cases. Add 1 motherboard cable adapter DB-25 Female to 26 Pin port to your computer,Ensure smooth data flow from your parallel port. This adapter cable connects to the motherboard or I/O adapter via flat ribbon cabling. Compatible with most brands of motherboards and I/O cards. The 11-inch length exceeds the standard length of cables often provided with motherboards, and provides flexibility for your connection..
Note:Do not insert the LPT1 pin on the main board. The red side line is the 1st line. The corresponding 1st pin on the main board usually has a red line.003cbr003e The printer port working mode (parallel port mode) in the motherboard BIOS, please set to Normal003cbr003e.
Package Content: 1 x DB25 to IDC 26 IDC Socket Flat Cable ,Length Cable : 30cm.

Check Stock