ReviewsVibrant Performance Exhaust

2 Bottles of New BG 44K Platinum

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock

J2 Engineering J2-CBE-DS-034 Stainless Steel Cat Back Exhaust System [Compatible with 09-13 Infiniti G37 Sedan 4-Door]

  • MODERATE SOUND/STREET SERIES – Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 2008-2013 Infiniti G37 and 2014-2015 Q60.
  • CAT-BACK PERFORMANCE – Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION – MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION – Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the ex....
Check Stock

HZXHS Motorcycle Exhaust Muffler Mid Link Pipe for 890 Adventure 2021/890 Adventure R 2021/890 Adventure R Rally 2021

  • For 890 Adventure 2021 / For 890 Adventure R 2021 / For 890 Adventure R Rally 2021.
  • The engine exhaust pipe is 100% brand new and professionally manufactured. It has good performance in reducing exhaust noise and temperature..
  • The exhaust manifold is designed for drivers who require the highest performance of motorcycles. Fashionable design style..
  • Once combined with the Slip-On Line exhaust, this optional header offers a significant improvement in performance across the entire rev range. Made from perfectly formed 304 Stainless Steel the addition of this header increases throttle response and power control.
  • We provide professional after-sale service, if you have any quastion of our product, please feel free to contact us. We are professional motorcycle accessories sellers, if you need other motorcycle accessories, you are welcome to consult.
Check Stock

Qiilu Full Exhaust System Pipe Middle Pipe Slip on Fit for YAMAHA YZF R25 R3 2015 2016 2017 2018

  • Fitment: Suitable for Kawasaki NINJIA 400 18-19 motorcycle. Please confirm your model before purchasing..
  • High Quality: Made of high-quality stainless steel material, with higher wear resistance, strong, durable and not easy to deform..
  • Performance: Exquisite workmanship and exquisite appearance. Improve the exhaust performance of motorcycles. It has good performance to reduce exhaust noise and reduce temperature..
  • Installation: Precision casting, easy to install and disassemble, professional installation is strongly recommended to avoid trouble or damage..
  • Excellent performance: The motor tube is 100% brand new and professionally manufactured, and the design is perfect. It has good performance in reducing exhaust noise and temperature, and it is not easy to form water accumulation.
Check Stock

Big Gun Exhaust End Cap (EVO Turndown Tip) (Red)

  • This Billet exhaust tip on the market with its 15 degree angled outlet and machined gunbarrel divots at the tip..
  • This Billet exhaust tip fits on the end of your OEM exhaust system increasing your rides overall performance and sound..
  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

GREHUA Upgrade Exhaust Pipe Muffler Jet Kit with Heat Shield Wrap Roll for Predator 212cc 196cc 6.5hp GX160 GX200 CT200U-ex BT200X CT200U Baja Warrior TrailMaster Massimo MB200 Go Kart Mini Bike Parts

  • FITMENT—fit for go kart engine mini bike parts powered by non hemi predator 212cc 196cc 6.5hp performance parts powerhorse GX160 GX200 Baja Warrior MB200 Colema* CT200U BT200x KT196 CT200U-ex monste* moto engine..
  • HIGH QUALITY MATERIAL—the exhaust pipe is made of high quality metal material for durability and long service life.The improved process with matching strong springs can hold the exhaust muffler perfectly,make the muffler stronger than the old muffler and the exhaust pipe more smoother to use and promote more power..
  • HIGH PERFORMANCE—it's the predator 212cc high performance parts upgrade header exhaust pipe muffler jet kit. It's a simple job to upgrade go kart engine mini bike exhaust pipe muffler,and let the exhaust flow more smoothly to promote more power..
  • EFFICIENT HEAT SHIELD PRETECTION—it made of heat resistant silicone,which can be used for long time and won't melt. The heat shield spacer can withstands 1800°F Direct/2500°F Intermittent Heat prevent burns from the hot exhaust pipes during riding. It is made of high quality materials and it can play a protective role..
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Granatelli Motorsports 307530C 3.0' (76 mm) Electronic Exhaust Cutout Only

  • ✿The pipe is made of high quality 304 Stainless Steel ,the motel beside is made of high quality aluminum alloy..
  • ✿Fit for 3″/76mm exhaust system.Two valves/flaps type..
  • ✿The exhaust cut out is made to enhance the performance & sound of your vehicle with Just A Touch Button..
  • ✿To open the cutout you simply flip the which and it will open your exhaust for a throatly rumble exhaust note..
Check Stock

GREHUA Upgrade Carburetor Adapter Exhaust Pipe Muffler Jet Kit for Predator 212cc 196cc 6.5Hp Trailmaster Baja Massimo MB200 GX160 GX200 Mini Bike Go Kart Engine Performance Parts Silver

  • FITMENT—fit for go kart engine mini bike performance parts generator powered by predator 212cc 196cc 6.5hp GX160 GX200 Baja Massimo MB200 Trailmaster MB200 Hammerhead 80T..
  • HIGH PERFORMANCE—it's the predator 212cc performance parts stage 2 upgrade carburetor adapter exhaust pipe muffler kit.It's a simple job to upgrade go kart engine mini bike exhaust pipe, can make the bigger flow more smoothly and let the exhaust flow more smoothly to promote greater power and stronger filtering effect..
  • COMPLETE ACCESSORIES—with excellent wear resistance and corrosion resistance and exhaust pipe muffler kit, complete accessories can bring you a lot of convenience, but also better update your go kart and mini bike..
  • PACKAGE INCLUDED—1 x carburetor,1 x adapter kit,1 x header exhaust pipe muffler，1 x spark plug,2 x nut,2 x screw,4 x gaskets，2 x lock washer,3 x main jet(.036" & .037").
  • NOTE—please check as much as possible to the item picture, model and size carefully before purchasing.And this exhaust pipe will change color due to the high heat generated by the engine.Or....
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Rislone Cat Complete Fuel, Exhaust & Emissions System Cleaner, Check Engine Light Medic

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock