ReviewsVice Grip Tap And Drill

48 Pieces Pin Vise Hand Drill Bits, Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood, Manual Work DIY, Jewelry, Plastic, Assembling, Model Making (0.5-3.0mm)

  • ☆ High quality: This adjustable vice has 3 keyless chucks with hardened jaws, which can hold the small drill bit tightly. After repeated use, the drill will not slip or fall off. And can adjust the twist drill with a diameter of 0.2-3.4mm..
  • ☆ Compatible and practical: hand drill clamps can fix small drills.
  • reamers can be used for electronic assembly.
  • ☆ Widely used: small hand drills can be applied to wood.
  • olive nut acrylic, plastic, etc. This is very important for tasks such as watch maintenance, because any slip or beat It may damage other components in the device.
  • ☆ Size: 1 mini pin vice. 48 twist drills 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0mm (3 each size).
  • 1.1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 / 1.7 / 1.8 / 1.9 / 2.0mm (2 each size) ).
  • 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / 2.7 / 2.8 / 2.9 / 3.0mm (1 per size). The full-size pin and sub-drill kit can meet your different needs..
  • ☆ Note: The adjustable pin vise is a hand tool, not a power tool.
  • the twist drill set is not suitable for hard objects like steel. Iron.
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

Sealey DS01 Drill Stand

  • Drill stand with cast iron base for vertical drilling using a hand drill.
  • Supplied with 65mm drill vice with quick jaw release..
  • Features a preset depth control and stop for drilling depths of up to 60mm, ideal for accurate and repetitive drilling..
  • For use with hand drills with a collar diameter of 38mm if used with the adaptor bush or 43mm if used without.
Check Stock

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64' Drill Combo Pack

  • Tap and drill Combo pack offers correct drill size for the tap in one convenient package.
  • Tap offers precision cut threads, accurately formed for consistent, exact threading.
  • Tap is heat treated and tempered for file hard threads, and longer, useful life.
  • Tap designed for hand cutting applications.
  • Drill bit made of premium grade high speed steel.
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready t....
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock

Gyros Professional Swivel Head Pin Vise Hand Drill with Anti-Slip Nickel Plated Steel Body, and Two Reversible Collets for Precision Drilling, Size Range of 0\ (0mm) to 1/8\ (3.175mm) (97-01818)

  • Durable and Precise: This Gyros handheld drill is constructed of nickel-plated steel to ensure the pin vice drill is ready for hobby, professional, and precision jobs it will be used for. The anti-slip design of the handle provides the right leverage for speed and precision when used for intricate drilling tasks where accuracy is critical. Use with Gyros HSS Wire Gauge Mini Twist Drill Bit Set 45-22010 for best drilling experience..
  • Unique Product Features: This manual drill is equipped with a swivel head for comfortable operation, while its octagonal shape helps prevent rolling. Full-length holes allow the pin vice to accommodate any wire or shank length. The two double-ended collets can be conveniently stored in the barrel when it is not in use to prevent damaged, lost, or misplaced collets..
  • Wide Size Range Equipped with two reversible collets, this mini hand drill has a size range of 0" (0mm) to 1/8" (3.175mm). The adjustable chuck head allows for a wide range of bit sizes. Even the smallest bits can be tightened and held in place firmly providing for a variety of jobs..
  • Multiple Uses: This unique finger drill has many different uses given the diverse nature of the tool. Use for precision drilling, electronic assembly, model making, winding, to....
Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

  • ★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
  • ★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
  • ★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
  • ★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
  • ★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features:003cbr003e 1:Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2:Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3:Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock