ReviewsVices And Clamping Tools

Rockwell RK9002 JawHorse Sheetmaster Portable Workstation

  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools.
  • [HOLDS A FULL SHEET OF PLYWOOD] With up to 49” of clamping range and a 3/8” per step clamping method.
  • [1 TON OF CLAMPING FORCE] 2000 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot.
  • [NO MAR PADS] Made from urethane so they grip the material without leaving any marks, perfect for premium woodworking projects.
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on un-even ground than four legs would.
Check Stock

90 Degree Positioning Squares, Right Angle Clamps 5.5' x 5.5'(14 x 14cm) Aluminum Alloy Woodworking Carpenter, Corner Clamping Square Tool for Picture Frame Box Cabinets Drawers

  • 【Super High Quality 90 degree clamps for woodworking】Our clamping square kit is processed by aluminum alloy and stainless steel, surface anodized reatment,Corrosion resistant,not easy to fade,and extremely fine workmanship.This clamping squares for woodworking are precision engineered and rigorously tested to ensure you get the dead square corners and joints so necessary for keeping your projects in specification..
  • 【Best Use Effect of woodworking tools】There are seven holes on each side of our squares, which has stronger clamping force. This corner clamps for woodworking has two measurement units,metric and imperial.It is laser-engraved and the scale is on the front of the product.The measurement length is accurate and easy to read..
  • 【Fit Thicker Boards】Suitable for boards with a maximum thickness of 2.2 inch / 5.6 cm. Apply to assembly more woodworking projects..
  • 【Wide Application】 The woodworking clamps set is great for building pieces such as wooden boxes, kitchen cabinet, drawers, picture frames, birdhouse, mailbox, etc. It's easy to clamping the vertical pieces plumb and to glue up..
  • 【Unique Gift for Arts and Woodworkers】 Our right angle clamp is great woodworking tools and accessories. Unique gift for Men, Father/Dad, Husband, H....
Check Stock

Bessey KREX2450 K Body REVO Clamp Kit 2 x 24 In. 2 x 50 In. and 2 KBX20 Extenders

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

90 Degree Clamp, Cabinet Clamp, 5.5" x 5.5"(14 x 14cm) Aluminum Alloy Right Angle square Tool, Corner Clamps for Woodworking Tools, Right Angle Clamp, Drawers, Picture Frame (4pack)

  • Our clamping square tools are machined from aluminum alloy and stainless steel, the surface is anodized, corrosion-resistant, not easy to fade, and extremely fine workmanship..
  • This corner clamps for woodworking tools has two measurement units, metric and imperial. It is laser-engraved and the scale is on the front of the product.The measurement length is accurate and easy to read..
  • wood working tools and equipment show that this size set is a scientific and appropriate length size selection.It can work with a clamping tool to check and position the corner for wood board jointing to gluing up or welding at a right angle..
  • The actual use of professional wood working work and sales volume shows that this size (140mm/5.5 inch ) of clamping squares are a very scientific and suitable length size choice..
  • Best choice for your box woodworking work. We provide a one-year warranty service and opened a 24-hour customer service hotline.It is a unique gift for men, fathers, husbands, woodworkers..
Check Stock

Grip Like a Vice Pt. 2 [Vinyl]

  • FUNCTION: Designed to hold your wood, plastic, metal, tubing, threaded items and irregularly shaped stock material safely in place while protecting them from clamping damage.
  • MAGNETIC: Innovative neodymium magnets ensure a quick, reliable attachment onto your vise, giving you a quick and screw-less installation without the need for additional tools.
  • NON-MARRING: Soft vice jaws are made with a high quality plastic polymer construction, producing a delicate, non-abrasive clamping action that will not scrape, scratch, or scuff your working stock or material.
  • VERSATILE: Possesses a multi-groove design that’s perfect and compatible with an assortment of holding slots for drill presses, vise blocks, mill clamps and other woodworking tools.
Check Stock

Bessey KREK2440 K Body REVO Clamp Kit 2 x 24 In. 2 x 40 In. and 1 Set of KP Blocks

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

Bessey KREK2440 K Body REVO Clamp Kit 2 x 24 In. 2 x 40 In. and 1 Set of KP Blocks

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

CMTOOL Brake Spring Tool for Semi Trucks, 5081 S-Cam Air Brake Spring Tools Replace Brake Shoes, Heavy Duty Tractors and Semi Trailers Brake Spring Tool, Steel Construction Truck Air Brake Tools

  • 3.【Wear-Resistant and Corrosion-Resistant Semi Brake Tool】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable..
  • 4.【Easy-to-use Air Brake Spring Removal Tool】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • 5.【S Cam Brake Tool with "V" Structure】The semi truck tools with a "V"-shaped structure at the end makes full use of the principle of leverage. The Lever action on the axle makes the job easier. Leaning on the axle makes the separation of the spring ring and the brake shoe safer and easier..
Check Stock

Kreg K5 Pocket-Hole Jig With Sk03 Pocket Hole Screw Kit

  • CLAMP: Front-mounted clamp handle makes clamping easy.
  • ratcheting clamp mechanism adjusts without tools.
  • QUICK-RELEASE: Quick-release pin holds drill block in place, and can't get lost.
  • STORAGE: Storage Wings provide built-in storage for bits, screws, accessories.
  • SETUP: Stop-Collar Setting Block makes drill bit setup easy.
  • BUNDLE INCLUDES: Sk03 Pocket Hole Screw KitDescriptionFront-mounted clamp handle makes clamping easy Ratcheting clamp mechanism adjusts without tools Quick-release pin holds drill block in place, and can't get lost Storage Wings provide built-in storage for bits, screws, accessories Stop-Collar Setting Block makes drill bit setup easy.
Check Stock

Evolution Metal Cutting Chop Saw with 14-Inch Mild Steel Blade with Universal Adjustable Stand Bundle (2 Items)

  • Bundle Includes: Evolution S355CPSL Metal Cutting Chop Saw with 14-Inch Mild Steel Blade and Evolution Power Tools EVOCS2 Universal Adjustable Metal Chop Saw Stand.
  • Fast and Secure Clamping: It features a quick-release vise with a robust square-threaded rod for fast and secure clamping. It features a quick-release vise with a robust square-threaded rod for fast and secure clamping. An attachable v-shape block is included for secure clamping of round and square tube.
  • Design: The saw’s compact design with a head lock down pin and carry handle makes it easy for transportation. Its chip deflector directs chips away from the operator and reduces cleaning time.
  • Steel Vice: It has an accurate and durable cast steel vice with 0 to 45-degree- miter capacity.
  • Ergonomics: The S355CPSL has an ergonomic, ambidextrous trigger with a comfortable textured grip. It provides easy blade change with integrated tool storage.
Check Stock

Honing Guide Jig for Sharpening System Chisel Plane Iron Planers Blade (Brass)

  • How to Use: Turn the screw cap counterclockwise, clamp your chisel or other knife tools, move up and down to adjust freely blade angle. Then tighten the screw cap clockwise, blade edge is smoothly fitted to the whetstone or sharpening stones, slide the knife back and forth until your tools becomes sharper and more precise..
  • Durable:Made of high standard stainless steel or brass,nut rust,you can choose brass or stainless steel.
  • Brass and stainless steel roller design,make move back and forth without restriction during sharpening.
  • Support chisel max clamping width to 55mm.
  • Support plane iron max clamping width to 80mm.
  • These honing guide are Suitable for wood chisel, planer, blade, graver, carving knife, plane iron, flat chisel edge sharpening.
Check Stock