ReviewsViscosity Index

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
Cure time 4 hrs At 65°C, 24.0 hour At 25°C.

Spec. Gravity1.16 g/cc Cured Water Absorption 0.23% After 24 hours Viscosity 4300 cP.
Mechanical Properties Hardness, Shore D 87 Adhesive Bond Strength 2100 psi Lap shear, 4 hrs At 65°C.
Thermal Properties CTE, linear 30.6 µin/in-°F At 68 °F Maximum Service Temp Air 248 °F.
Mix Ratio, parts by weight 100/20 Resin/Hardener.

6,000 HOUR SEVERE SERVICE - Extremely long life fluid, with very long oxidation life. 3 times the life of most other fluids..
ANTI-WEAR BOOSTER PACK - Contains a built-in severe service anti-wear booster pack. Three times the zinc of most other hydraulic oils..
HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release..
SAVES 50%- 80% on fluid costs annually vs regular or economy hydraulic oils..

Viscosity Index Improvers: Enhanced VII maintain lubricant flow and improve shear stability of the oil, especially at extreme temperatures..
Water Demulsifiers: Improves fluid ability to separate from water, virtually eliminating hydraulic issues related to water..
Pour Point Depressants: Reduce the pour point and improve flow at low temperatures..
Detergents and Dispersants: Enhances the fluid's ability to clean and disperse contaminants..
Extreme Pressure/Anti-Wear additives: Polarized AW, Friction Modifier and EP components provide unequaled protection for pumps, pistons, and sleeves. Fluid strength in increased allowing for significant friction reduction and protection of vital hydraulic components. Polarized film protects pumps during start up conditions..

6,000 HOUR SEVERE SERVICE - Extremely long life fluid with very long oxidation life. Three times the life of most other fluids..
ANTI-WEAR BOOSTER PACK - Contains a built-in severe service, anti-wear booster pack. Three times the zinc of most other hydraulic oils..
HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, it prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
DIRECT OEM FLUID REPLACEMENT for CAT HYDO 10 and CAT HYDO 10 Advanced OEM fluids..
ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release. SAVES 40%- 80% on fluid costs annually versus regular or economy hydraulic oils..

Compatible With Volkswagen Golf GTI (MK2/MK3) 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998.
Spring Rate (Front/Rear) : 5 kg/mm/4 kg/mm.
52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track.
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke.
Powder Coated CNC Machined Aluminum And Carbon Steel Accessories.
Independent Spring Tension And Height Adjustment.
Racing Grade Shock Oil With High Viscosity Index.
Shock Absorber Can Be Rebuild When Worn Out.
Full 1 Year Limited Warranty From Date Of Purchase.
Install By Experienced Professionals Is Highly Recommended.

Full synthetic GL-4 75W80 with PAO and Esters, manual transmission fluid. Exceeds all OEM fluid performance for 75W80 gear, MT, differential, syhchromesh and transfer cases..
No reactive sulfurs, protects all yellow metal components. Extremely long drain intervals up to 5 x OEM intervals..
Contains a custom build, high-performance detergency adpack coupled with friction modifiers, defoamers, and a corrosion inhibitor to handle various kinds of contamination.
features 204 VI Index, extreme viscosity stability, and arctic grade, -60 F pour point..
Excellent shifting performance, rapid, smooth shifting, no slipping. Eliminates notchy shifting and "grinding" gear noise..
Compatible with Honda, Acura, Toyota, BMW, Audi, Mini, BMW X5 Tranfer Cases, Jeep, Chrysler, Ford, Mercedes Benz and many others..

Provides excellent performance in electronically controlled automatic transmissions. Dyed red for easy leak detection.
Manufactured with high-viscosity index, premium-quality, hydroprocessed base oils and specially designed performance additives. Helps prevent rust and corrosion.
Provides excellent shifting characteristics at high and low ambient temperatures, and guards against transmission shudder.
Offers excellent thermal, oxidation and shear stability, as well as good low-temperature fluidity. Provides wear protection and inhibits the formation of gum, sludge, lacquer and foam.
Not for use in applications where MERCON V, MERCON SP, Continuously Variable Chain Type Transmission Fluid, Motorcraft Premium Automatic Transmission Fluid, FNR5 Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended.

Please see Product Description regarding the California Proposition 65 Warning.
Very low pour point with a high stable viscosity index for excellent transmission performance in all conditions.
Provides high thermal stability even when the transmission is subjected to extreme conditions while also providing anti-friction characteristics thus....
Protection against wear, corrosion, and foaming while maintaining a neutral behavior towards sealing materials and a inhibition to non-ferrous metals.
Note: See “Product Information/Technical Details/OEM Part Number” section in this product listing for OEM approval details, OEM part numbers, oil....

Fully synthetic lubricating oil / Extreme temperature range / Resists burnoff / High temp, high-viscosity index formula.
Moisture barrier / Rust preventative / Excellent for trigger, slide & actions.
Precision needle tip applicator for firearms, fishing reels, knives, etc..
Long lasting mil-spec grease for AR 15 rifle building, superior adhesion essential for hot days and high bond strength for long term storage needs.
Lubrication performs under extreme pressure and heat to prevent damage.

Provides excellent performance in electronically controlled automatic transmissions. Dyed red for easy leak detection.
Manufactured with high-viscosity index, premium-quality, hydroprocessed base oils and specially designed performance additives. Helps prevent rust and corrosion.
Provides excellent shifting characteristics at high and low ambient temperatures, and guards against transmission shudder.
Offers excellent thermal, oxidation and shear stability, as well as good low-temperature fluidity. Provides wear protection and inhibits the formation of gum, sludge, lacquer and foam.
Not for use in applications where MERCON V, MERCON SP, Continuously Variable Chain Type Transmission Fluid, Motorcraft Premium Automatic Transmission Fluid, FNR5 Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended.