ReviewsViscosity Level

CPL Mania : SPot The Difference Cricket Games For Cricket Lovers

Mobil 1 Synthetic Gear Lube LS is a supreme performance, synthetic, multipurpose, automotive gear lubricant.
Meet or exceed the highest level of performance requirements of many modern passenger vehicles – including limited slip applications.
Helps protect against thermal and oxidative degradation, wear and corrosion, and viscosity loss associated with premature shearing.
Promotes outstanding power transfer performance - even in some of the most severe driving conditions.

Specifically engineered for use in bicycle hydraulic disc brakes..
Provides maximum fluid life and braking performance, even at low temperatures..
Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures..

Van Gogh watercolors are a student and artist level range of paints featuring brilliant, transparent, and intense colors with high tinting strength..
Lightfastness rated at +++ (100+ years under museum conditions)..
Thanks to the purity and uniform viscosity, these watercolors are easy to work with and easy to mix..
Proudly produced in Holland with stringent quality control for a consistent experience with every purchase..
The Van Gogh watercolor range consists of 72 colors in 10ml tubes and in half pans..

Higher / Correct Level of ZDDP to provide protection during initial engine start-up and proper Camshaft & Lifter Break In (Flat Tappet, Roller, Solid, Hydraulic,).
Multi-Viscosity for better flow to provide faster lubrication at start up..
Formulated specifically for Break In – NO ADDITIONAL ADDITIVES SHOULD BE USED..
Recommended and used by Top Engine Builders.

Mobil 1 Synthetic Gear Lube LS is a supreme performance, synthetic, multipurpose, automotive gear lubricant.
Meet or exceed the highest level of performance requirements of many modern passenger vehicles – including limited slip applications.
Helps protect against thermal and oxidative degradation, wear and corrosion, and viscosity loss associated with premature shearing.
Promotes outstanding power transfer performance – even in some of the most severe driving conditions.

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
Flash Point: 230 Degrees C Country of Origin (subject to change): United States.

5 quart synthetic blend high mileage 5W-20 motor oil for cars, trucks, and other vehicles.
High level protection for engines with over 75,000 miles and vehicles with longer drain intervals.
Reduces likelihood of low speed pre-ignition.
High resistance to viscosity and thermal breakdown.
Fights volatility burn-off to minimize engine deposits and exhaust emissions.
For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.

★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》.
--The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use..
★ 4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time..

Castrol GTX Full Synthetic Motor Oil provides maximum protection to help fight the impact of severe conditions that can potentially shorten engine life.
Castrol GTX Full Synthetic has been proven to dramatically reduce engine wear - 6X better than the industry standard.
1.3X better sludge protection than industry standards.
Full synthetic formula provides thermal and oxidation stability with a superior level of protection against viscosity breakdown.
Specifications: API SP/SN PLUS/SN, ILSAC GF-6, Meets Ford WSS-M2C947-B1.

Advanced Technosynthese lubricant for High Performance/Protection.
Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
Can be mixed with synthetic/mineral oils..
Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..

Castrol GTX Full Synthetic Motor Oil provides maximum protection to help fight the impact of severe conditions that can potentially shorten engine life.
Castrol GTX Full Synthetic has been proven to dramatically reduce engine wear - 6X better than the industry standard.
1.3X better sludge protection than industry standards.
Full synthetic formula provides thermal and oxidation stability with a superior level of protection against viscosity breakdown.
Specifications: API SP/SN PLUS/SN, ILSAC GF-6, GM dexos1 Gen 2, Meets Ford WSS-M2C962-A1.