ReviewsVoice Coil

Leverkusen 2010

Voice Coil: 2.5” Dual 4 Ohm Made in USA Voice Coil can withstand the true RMS rating this subwoofer is advised for. No Inflated power here..
Non-Pressed Paper Cone for top quality bass performance and Long-Lasting Durability..
156mm Double Stacked Magnets very large for this voice coil and can handle the advertise Peak and RMS power.
1200 Watt Max power and 600 Watts RMS Power.
Sensitivity (1w/1m): 91dB. Frequency Response Range: 15Hz - 450Hz. This woofer can handle deep low bass that you really can enjoy low bass music..

2400 W continuous program power capacity 100 mm (4 in) copper voice coil 35 - 1000 Hz response 97 dB sensitivity.
Aluminium demodulating ring allows a very low distortion figure Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression.
Ventilated voice coil gap for reduced power compression.

Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
Black Aluminum 2.5” voice coil former for superior heat dissipation.

1.5” 4 Ohm – Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
1.0” 8 Ohm – Single Layer High Temp Voice Coil for Tweeter.

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″, Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..

...ir). Speaker Impedance: 4 Ohms. Frequency Response: 55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies f....

Black Aluminum 2.5” voice coil former for superior heat dissipation.
Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
High strength & patented cast aluminum frame.

Composite multi layer ceramic fiber and Rohacell cones structure.
Voice coil (Single or dual): Single | Voice coil impedance (ohms): 4 | Voice coil Diameter (inches/mm): 1.4/35.56 | Recommended Power Range (watts): 15 to 125.
Mounting Diameter Tweeter(inches/mm): 1.97/50.04 | Mounting Depth Tweeter(inches/mm): 0.8/20.32 | Mounting Diameter Midbass(inches/mm): Standard | Mounting Depth Midbass(inches/mm): 3.61/91.69.

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2"..