ReviewsVolt Battery Ratings

DMM-11A 803293 Digital Multi-Meter Fuse 5 Pack QSU

NSi Industries TORK TU40 Indoor/Outdoor 40-Amp Universal Multi-Volt Electromechanical Appliance Timer - 24-Hour Programming - Multiple On/Off Settings - 120-277-Volt - Compatible with Incandescent/Compact Fluorescent/LED - Same On/Off Times Each Day

• AUTOMATE YOUR HOME/OFFICE: The timer allows you to turn on and off your air conditioners, water heaters, pumps, signs, lamps, fans and other appliances automatically during a 24-hour cycle and once programmed, the settings will repeat daily.
• SIMPLE TO USE: Pull all the tabs up to define the OFF state duration, push all the tabs down to define the ON state duration. Rotate dial clockwise to set time, aligning desired time with arrow. Set slide switch to the center position to run programmed setting.
• CONVENIENT SCHEDULING AND FEATURES: The timer features multiple on/off setting and is designed with captive tabs, allowing for as little as 15-minute time intervals. The timer features automatic voltage detection and a real time clock face.
• COMPATIBILITY: The timer is compatible with incandescent, compact fluorescent and LED light bulbs.
• RATINGS: 120-277-Volt, 60 Hz, 40-Amp, 28-Volt DC, 20-Amp Resistive, 30-Amp Inductive/120-Volt, 30-Amp, 277-Volt, 20-Amp Ballast/120-Volt, 15-Amp Tungsten. Pilot Duty: 120VAC 720VA, 240VAC 720VA.

Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS with Status Mode LED Indicator

• Includes: Amplifier. PA Microphone. Bass Remote. Mounting Screws.
• Features: Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms 003c 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms 003c 1% THD..
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH 1 - 6. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz. Full IC-Controlled Protection Circuitry. Fully Adjustable Bass Equalization Control. 2 Ohm Stable Stereo..
• 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable@ 4 Ohm. 2 CH / 4 CH/ 6 CHInput Mode Selector. Mute and Delay Soft Start System. Remote Dashboard Subwoofer Control. 8 Volt Preamp Circuitry. ELNA Brand Audiophile Quality Capacitors. Status Mode LED Indicator. Frequency Response: 10Hz ....

LAMPVPATH (Pack of 5) I-Type 9V Battery Connector, 9 Volt Battery Clip, 9V Battery Clip Connector with Wire and Hard Buckle Plastic Housing

• Package: Includes 5 pcs I TYPE 9v battery connector.
• All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package..
• Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material).
• Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches.
• Connection wires color of 9v connector: black and red..
• Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit..
• Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet..

Freeman PEL2AHB 20V 2AH Lithium-Ion Replacement Slide Battery for Cordless Tools

• 20V 2Ah lithium-ion slide battery provides long lasting power for cordless tools.
• Compatible with Freeman's P12IW Cordless and Brushless 20 Volt 1/2" Impact Wrench, PE20V2118G Cordless 20 Volt 2-in-1 18-Gauge 2" Nailer and Stapler, PE4118GF Cordless 20 Volt 4-in-1 18-Gauge 2" Flooring Nailer and Stapler, and PEL4ABC 20 Volt Electric Lithium-Ion Quick Battery Charger.
• Long lasting 20 volt lithium-ion battery fully charges in 45 minutes.
• Three indicator lights show how much charge remains in battery.
• Overheating and overcharging protection extend the life of the battery.

Lasica DC9310 Fast Charger Replacement for Dewalt 18V Battery Charger DC9310 Compatible with DeWalt 7.2V-18V XRP NiCad/NiMh Batteries DW9116 DC9096 DC9098 DC9099 DW9098 DW9099 DW9096 DW9072 DW9061

• 【Great Replacement for DEWALT 18V Charger DC9310】Lasica DC9310 Multi Volt battery charger replacement for DeWalt 7.2V 9.6V 12V 14.4V 18V NiCad & NiMh battery charger DW9226, DC9319, DW9116, DC9320, DW9118, Compatible with DEWALT 7.2-volt to 18-volt cordless drill tool battery..
• 【Widely Compatible with DEWALT 7.2V-18V XRP Batteries】Compatible with all DeWalt 7.2 volt, 9.6 volt, 12 volt, 14.4 volt, and 18 volt NiCad & NiMH batteries XRP DC9096 DC9099 DW9099 DW9095 DW9096 DW9098 DC9098 DE9098 DW9091 DC9091 DW9072 DC9071 DE9036 DE9057 DE9074 DE9503 DW9062 DW9094 DW9057 DE9061DE9095 DE9038 DE9096 DE9039 and more. (❌ NOT for Lithium-ion Battery ❌).
• 【DC9310 1-Hour Fast Charging】United States standard plug 100V to 240V voltage input, DC output 2.0A. Charges XRP 7.2V to 18V NiCD and NiMH battery in 1 hour. Built-in air-cooling fin to cool the battery. Diagnostics with a single red light communicate battery charge status..
• 【Safe & Reliable】The DC9310 7.2V-18V NiCd & NiMH Fast Charger is CE, FCC, ROHS certified, tested, and validated by manufacturer to match specifications of OEM products and export....

AYTXTG 2Pack 6.0Ah C3 Lithium Battery Replace for Craftsman 19.2 Volt Battery + Craftsman Battery Charger for XCP 130279005 1323903 130211004 Craftsman Charger 19.2V

• Replacement all Craftsman C3 battery 11375 11376 130211004 130279005 11045 120235021 1323903 315.PP2010 PP2011 315.PP2025 PP2030. Fit all craftsman 19.2 volt max system of tools..
• No memory effect, large capacity enhances the use time, Integrated LED battery charge level indicator allows users to monitor battery using..
• Charger 100% Compatible with All Craftsman C3 19.2 Volt Lithium-ion & Ni-cad Batteries (Not fit model 9.6-volt 1323424 Nicad battery, 14.4-volt 9-11007 Lithium battery, 18-volt battery).
• Four LED indicator light: allows users to conveniently monitor charge levels. Built-in protections to protect the Craftsman C3 battery and Craftsman charger from overheating, overcharging and short-circuit..
• Warranty: 45 days money back, 12 months warranty.24*7 hours prompt customer service..

Lasica Replacement for Black & Decker Battery Fast Charger Compatible with Black and Decker 9.6V 12V 14.4V 18V 24V NiCad & NiMh Batteries HPB18-OPE HPB14 HPB12 HPB96 BDCCN24 BDFC240 Firestorm Charger

• 【Great Replacement for Black & Decker 9.6V to 24V Charger】Lasica multi-volt battery charger replacement for Black and Decker 18 Volt 14.4 Volt 12 Volt 9.6 Volt 24 Volt NiCad & NiMh battery charger 90592360-01, 90556254-01, FSMVC, BDCCN24, and BDFC240. Compatible with Black & Decker 9.6 volt to 24 volt cordless drill tool battery..
• 【Widely Compatible with Black&Decker 9.6V to 24V Batteries】Compatible with Black and Decker 18v 14.4v 12v 9.6v 24v slide-style batteries HPB18 HPB18-OPE HPB14 HPB12 HPB96 HPB24 244760-00 firestorm FSB18 FSB14 FSB24 FS12B. (❌ NOT for 20V Lithium Battery ❌).
• 【BDFC240 Fast Charger】United States standard plug 100V to 240V voltage input, DC output 2.3A. Charges Firestorm 9.6V to 24V NiCD & NiMH batteries in 60 minutes. (Also compatible with Black and Decker 18V lithium battery HPB18)..
• 【Intelligent Protection System】Unique all-around cooling system design, Internal cooling system circulates air across batteries to reduce hot/cold pack delays. Diagnostics with LED indicator communicates battery charge status. Optimizes battery life by actively controlling current,....

ZTS MBT-LA2 Lead Acid Multi-Battery Tester with Clip-Type Test Lead Set & K-MBTLA2 Accessory Kit

• Computes State of Charge for lead acid battery types [SLA, Gel, Flooded].
• Test battery condition 2Volt, 4-Volt, 9-Volt, 8-Volt, 12-Volt - quickly and easily identifies weak or failing batteries.
• Measures battery performance under load, not just voltage or internal resistance.
• Ideal for battery management and cell matching - reduce cost and increase reliability.
• Made in U.S.A. Patents 6,823,274 - D611851.

BOSCH 12-Volt Max EC Brushless Impact Driver Kit 2 battery kit PS42-02 12.70 Inch x 9.50 Inch x 4.10 Inch

• Compact: The PS42-02 Features an Ultra-Compact Head Length of 5.5 Inches and Weighs Only 1.6 Lbs.. the Driver Is Lightweight and Ideal for All-Day Use..
• TORQUE: The Bosch PS42-02 12 Volt Driver provides 975 inches --pounds of max torque, making it ideal for repeat driving tasks and about 85 percent of fastening tasks..
• SPEED: The driver offers fast driving no-load RPM ratings of 0-1,200 and 0-2,600 and an optimized impact system with no-load impact per minute ratings of 0-2,700 and 0-3,100..
• EFFICIENT: With a 12V EC Brushless motor, the PS42-02 provides unmatched efficiency with greater runtime and a longer tool life..
• CONVENIENT: The PS42-02 driver comes complete with three LED lights for improved illumination in dark work spaces and a belt clip for quick and easy storage..

Powilling Replacement Battery Charger for Craftsman C3 19.2 Volt Ni-Cd and Lithium-Ion Battery

• Compatible with All Craftsman C3 19.2 Volt Lithium-ion & Ni-cad Batteries (Not fit model 9.6-volt 1323424 Nicad battery, 14.4-volt 9-11007 Lithium battery, 18-volt battery).
• High quality dual chemical charger replacement for craftsman original charger..
• Diagnostics with LED indicator communicates battery charge status, the Rapid Optimum Charger monitors actively controls the current, voltage and temperature to protect your batteries..
• 100% QC of this battery, 45 Days Money Back and 1 Year Warranty..