Electronic Specialties 597 Premium Automotive CATIII 1000V Hybrid Safe DMM
- Material Plastic. Battery is not include..
- For Resistance DC current AC voltage battery capacitor DC voltage AC current frequency / occupancy ratio.
ReviewsVoltage Range
ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module
- Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
- With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
- Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
- Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
- Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi
- ❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
- ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
- ❃❃ACS712 Hall Effect Current Sensor Module：Chip: ACS712ELC-30A.
- Pin 5V power supply, on-board power indicator.
- ❃❃Voltage Sensor Module：Voltage input range: DC0-25V.
- input : Terminal cathode connected to VCC, GND negative pole.
- Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
- ❃❃Perfect Combination：Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
NOYITO AC to DC Precision Buck Power Supply Module AC 120V 100V-264V to 12V 2A 2000mA Isolated Step Down DC Module (12V 2A)
- Isolated Precision Buck Power Supply Module ，Wide voltage range input with overload, short circuit, over temperature protection. Ultra-small size and high efficiency..
- Input voltage range: AC 120V 100- 264V. Frequency range: 47-63Hz..
- Output voltage: 12V ±1%. Output current: 2A 2000mA ..
- Ripple: less than 60mVp-p. Output accuracy: +/-1%. Voltage regulation rate: +/-1%..
Songhe LM2596S LM2596 with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Board Step Down Module Power Supply Module 5pcs
- This module can be applied to fields in the input voltage is higher than the step-down output voltage, such as batteries, power transformers, DIY....
- With a voltage meter and voltmeter displays self-calibration. Uses a more advanced microprocessor voltage voltmeter error ± 0.05V, Range 0 ~ 40V. (To....
- Touch of a button to switch the input or output voltage measurements and has a light show which is being measured voltages, and save the settings,....
- Input Voltage 4.5~ 40V. (Input voltage must be higher than the output voltage of 1.5v or more).
- Adjustable output voltage range of 1.25V ~ 37V continuously adjustable. (Input voltage must be higher than the output voltage of 1.5V).
Victron Energy Orion-Tr Smart 12/24-Volt 15 amp 360-Watt DC-DC Charger, Isolated (Bluetooth)
- Input voltage range: 10-17V --- Output voltage adjust range: 20-30V --- Cont. output current at nominal output voltage and 40°C: 15A --- Maximum output current (10 s) at nominal output voltage minus 20%: 25A.
Mastech MY61 Digital Multimeter, 3.5 Digit LCD, 1999 Count
- Dc voltage range: 200mv-1000v and ac voltage range: 200mv-7800v.
- Resistance range: 200ω -200mω and temperature range: -4°f to 1832°f.
DC Buck Converter, DROK DC to DC Step Down Power Supply Module 10V-65V to 0-60V 0-12A Adjustable Voltage Regulator Transformer Board with LED Display for Volt Reducer
- 【Adjustable Output Voltage and Current】For DROK buck converter: Input voltage range is DC 10-65V.
- Output voltage range is DC 0-60V, can be arbitrary adjustable and used to convert 24v to 12v 5v.
- Output current range is 0-12A, can be arbitrary adjustable.
- 【LED Display】This power supply module is designed with LED display, which can show real-time voltage, current, capacity and time..
- 【Constant Current and Voltage with Indicator Lights】This volt transformer board can set constant output voltage and constant output current by the key buttons. Also, the module is equipped with working status indicator lights, which are output OUT, constant voltage CV and constant current CC respectively, so that the working status can be checked in real time..
- 【Auto Output and Button Lock Mode】Automatic output can be set after power on. And The parameter adjustment button can be locked to prevent misoperation to adjust the output voltage and current parameters..
- 【Cooling fan and cooling pad】This adjustable power supply converter is equipped with cooling fa....
EVTSCAN Latest DPA51CM44 3-Phase Monitoring Relay, Current/Voltage Monitoring Relay Phase Sequence Protector for Three-Phase System, Without Neutral, Phase Loss, 208-480VAC
- ✈ PRODUCT NAME---Voltage Monitoring Relay.
- Protection function: over voltage, under voltage.
- Contact capacity: 6A 250VAC (resistivity).
- ✈ REAL-TIME MONITORING---The voltage monitoring relay could achieve real-time monitoring of dc overvoltage and undervoltage faults, and over-voltage, under-voltage value, and action time can be adjusted.
- ✈ MAIN FEATURES---The voltage monitoring relay is of 2 sets of normally open and normally closed contacts, 2 indicator lights indicate various working conditions, no additional auxiliary power supply is required.
- ✈ 35MM GUIDE RAIL---With 35mm guide rail and standard modular structure, the voltage monitoring relay is easy to install, easy to operate.
- ✈ TYPICAL APPLICATIONS---The voltage monitoring relay is typically applied in dc motor, battery,UPS power supply, dc switchgear, dc panel, industrial control system.
ALL-TEST PRO Motor Genie Deenergized Motor Circuit Analysis Testing Instrument
- Accurate measurement: In order to improve the accuracy of voltage measurement,Battery capacity testers circuit is specially designed for DC bias. When the terminal is not connected at all, it will display a small voltage, which does not affect the actual measurement.
- Size:Discharge testers board size is 5x3.4 cm/1.97x1.34 inch, small, easy to carry and store.
- Power supply voltage:Battery capacity meters power supply voltage: DC4.5-6V (micro USB interface), working current: less than 70mA. Supported current: no more than 3.000A resolution 0.001A.
- Discharge voltage:Battery meter testers discharge voltage: 1.00V-15.00V, resolution 0.01V. Termination voltage range: 0.5-11.0V.
- Battery capacity:Battery meters battery capacity range: 9999Ah (1Ah=1000mAh). When the value is large, it is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it reaches 10Ah, it is displayed as XX.XX..
DC Power Meter, DROK 6.5-100V 100A Digital Multimeter, LCD Display Voltage Current Energy Monitor 12V 24V 36V 48V 60V 72V RV Battery Voltmeter Ammeter, Volt Amp Watt Detector Panel with 100A Shunt
- PARAMETER —- voltage test range DC 6.5~100V.
- DATA GUARANTEED —- with power-off storage function, all parameter will be stored automatically when powered off.
- OVER-VOLTAGE ALARM & SETTABLE ALARM VOLTAGE —- if active power is larger than threshold, backlight and power will flash as an indicator..
- LARGE-SCREEN LCD —- display voltage, current, power, energy at the same time..
- SWITCHABLE BACKLIGHT —- backlight can be turned on/off manually..