ReviewsVoltage Relay

Baomain SSR-60DA 60A Solid State Relay Module 4-32VDC / 24-480VAC + Heat Sink

Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..

Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
With Optical Coupling Isolation,Triggering More Reliable and Stable.
2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.

Check Stock

Lisle 69300 Master Relay Test Jump Set

Includes 8 Jumpers to fit most popular relays.
Includes Test Lead Kit for easily and securely connecting Relay Test Jumpers to a multimeter.
Terminal Leads with switch, fuse and power options provide easy access to check current or voltage on many fuses and relays used on vehicles today.
Also allows testing of relay configurations not covered by eight Relay Test Jumpers, like Volkswagen, BMW and other European vehicles.
Relay Puller Pliers easily remove electrical relays.

Check Stock

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
material : metal, plastic, electronic parts.

Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

Check Stock

GRV8-02 Single Phase Monitor Relay, Keenso Adjustable Voltage Monitoring Relay Over Voltage Protection AC/DC Voltage Monitoring Relay A220V/ D12V/ AD24-48V/ AD120-240V (GRV8-02/AD240V)

【Effective & Accurate monitoring】-- This GRV8-02 Single Phase Monitor Relay mainly used to monitor the working voltage(true RMS measurement). 100% High accuracy, voltage measurement accuracy is ≤ 1%..
【Built-in LED Display】-- With built-in LED indicator, you can easily get the working status of the relay is indicated, very simple and convenient to use. The operating mode can be selected via the rotary knob..
【Super Function】-- Apply to over voltage protection for electrical equipment or compressors, emergency/backup power switching control. 100% safe and practical AC/DC Monitor Relay..
【Compact & Practical】-- GRV8-02 Monitoring Relay in professional design, compact size, only 18mm width, 35mm rail mounting. Portable and practical for you to operate!.
【Keenso Service】-- 100% test before shipping, fast money refund & perfect customer service! If You Have Any Questions, Just Connect Us By QA & E-Mail.

Check Stock

AOICRIE 12V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR

★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
★Equipped with high-current relay, AC250V 10A.
★The control signal voltage range: the trigger signal is low 0-2V.
★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.

Check Stock

0.5S-300H 11 Pins Knob Control Delay Timer Relay H3CR-A Waterproof Time Relay 100-240VAC 100-125VDC for Automated Control Circuit

【Wide Field of Applications】: Our 11 pins knob control delay timer relay is widely applied to automated control circuit such as remote control,....
【Super Wide Adjustable Time Range】: The adjustable time range is super wide, which can last from 0.5 seconds to 300 hours. Users can adjust the....
【Wonderful Shell】: This 100-240VAC 100-125VDC knob control time relay adopts high quality plastic case, and this wonderful shell is waterproof and....
【High Precision】: Our 0.5s-300h H3CR-A waterproof time relay has stable performance, and a long service life. This delay timer relay also has high....
【Specifications】: Model: H3CR-A Rated voltage: 100-240VAC 100-125VDC Voltage tolerance: ±10% Power consumption: about 1.9VA Time range: 0.5....

Check Stock

Painless Performance 30133 Weatherproof PCM Controlled Fan Relay Kit, Ground Activated

Inexpensive protection for an electric fan and a vehicle's wire harness.
Relay activation by grounding the relay coil can be provided by most Powertrain Control Modules.
Provides direct battery power, protects PCM from voltage spikes and prevents the fan from back feeding through the vehicle's wire harness.
Kit includes weatherproof: SPST 35-amp relay, 30-amp circuit breaker, relay base with 10' harness, crimp-on terminals and mounting hardware.

Check Stock

QCQIANG JQX-13F 8 Pin-10A AC 110V Electromagnetic Power Relay with Female Spade Electric Wire Connector(3pcs)

JQC-3F general purpose 5 pins SPST power relay PCB type mini power coil relay.
Contact : 7A 250VAC, 12A 120VAC/10A 125VAC, 10A 28VDC.
Coil 5 pins mini SPST power relay pin quantity : 5 Pin.
material : plastic, metal, electronic component.
Power relay size (Approx.) : 1.8 x 1.4 x 1.9cm / 0.7"""" x 0.6"""" x 0.7""""(L*W*T),widely used in the remote control, communication, automatic control system, electronic equipments, etc..
Power relay PCB type compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit.

Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..

Check Stock