ReviewsVoltage Tester For Dc Voltage

ACS712 Hall Effect Current Sensor Module 5A 20A 30A Range + Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
【Package Included】1pcs x 30A,1pcs x 20A, 1pcs x 5A ACS712 Current Sensor Module, and 1pcs x Voltage Sensor Module DC0-25V Voltage Tester Terminal....
【Current Sensor Module】Chip: ACS712ELC-05A，Measuring range: ±5 amps, corresponding Analog output:185mV/A.--- ACS712ELC-20A，Measuring range:....
【Voltage Sensor Module】Voltage input range: DC0-25V.
【Pls Note】: ACS712 is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!.

Check Stock

Vol-con Xl Solenoid Voltage Tester

Extremely rugged and reliable three-in-one tester.
Tests for high voltage up to 600V AC/DC, Tests for voltage as low as 6V AC/DC.
Bright, long-life LED and neon indicators.

Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
【Current Sensor Module】Chip: ACS712ELC-30A.
Pin 5V power supply, on-board power indicator.
The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
【Voltage Sensor Module】Voltage input range: DC0-25V.
DC input connector: Terminal cathode connected to VCC, GND negative pole.
Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.

Check Stock

Digital Multimeter Electrical Test Kit Non-Contact Voltage Tester Receptacle Tester Carrying Case and Batteries Klein Tools MM320KIT

Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance.
Meter also test batteries, diodes, and continuity.
Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.
Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function.
ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels.

Check Stock

ANENG Digital Clamp Meter Multimeter Tester 4000 Counts with NCV Amp Ohm Volt Meter Measures AC Current AC/DC Voltage,Capacitance Resistance Diodes Continuity Frequency Backlight Electrican Tools

【Quickly detect values and troubleshoot】The clamp meter can measure only for AC current (not for DC current), AC and DC voltage, resistance,....
【Double Open Clamp】The maximum wire diameter that the multimeter can measure is 1.42 inches without interrupting the circuit. Double open jaws....
【NCV Defection Function】Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.The NCV non-contact AC....
【Easily Carrying & Durable】The voltage tester where it can handle the demands of a long workday, from the durable exterior to the wide range of....
【We’ve Got You Covered】Note: Make sure press “REL”to zero out the meter before clamping.The package of capacitor tester included....

Check Stock

Klein Tools CL380 Electrical Tester, Digital Clamp Meter and Non-Contact Voltage Tester, Auto-Ranging and TRMS, 400 Amps, LCD Display

Electrical Tester measures both AC/DC current via the clamp.
Non-contact voltage tester integrated into the clamp jaw.
High-visibility reverse contrast LCD display for improved viewability in all ambient lighting conditions.
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.
Measures AC/DC voltage, DC micro-Amp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads.

Check Stock

Klein Tools NCVT3PKIT Electrical Test Kit Dual-Range Non-Contact Voltage Tester with Flashlight AC/DC Voltage Tester and Carrying Case

Electrical test kit contains a non-contact AC voltage tester with integrated flashlight and AC/DC voltage tester.
Dual range NCVT-3P with flashlight automatically detects and indicates low voltage (12-1000V) range and standard voltage (70-1000V AC).
NCVT-3P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires.
NCVT-3P is a lightweight, compact tool with pocket clip for convenient storage and quick access.
Bright flashlight on the NCVT-3P illuminates work area and may be used independent of voltage detection function.

Check Stock

USB Digital Power Meter Tester,Tohilkel Safety Tester Multimeter Current and Voltage Monitor DC 5.1A 30V Amp Voltage Power Meter Test Speed of Chargers Cables Capacity of Power Banks-Black

MULTIFUNCTIONAL USB TESTER: USB Meter Tester is mainly used to detect USB charging current, voltage, discharge capacity, quantity of electric charge,....
SECURITY GUARANTEE: Built-in CW3002D chip, use indoor intelligent system, Supports QC 2.0 / 3.0 high voltage test, too low and too high voltage....
WIDE APPLICATION: The handy USB tester can be applied to many electric devices, such as mobile phone, portable power bank, tablets, pad, camera.....
WIDE TESTING RANGE & SIMPLE OPERATION：Input/Output Voltage: DC3-30V, Current Range: 0-5.1A. This portable USB tester is easy to carry and enables....
Any questions contact [email protected]'ll be solve online at the first time..

Check Stock

UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi

❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
❃❃ACS712 Hall Effect Current Sensor Module：Chip: ACS712ELC-30A.
Pin 5V power supply, on-board power indicator.
❃❃Voltage Sensor Module：Voltage input range: DC0-25V.
input : Terminal cathode connected to VCC, GND negative pole.
Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
❃❃Perfect Combination：Using this product can measure both voltage and current, very suitable for DIY electronic design projects..

Check Stock

KZYEE KM50 Power Circuit Probe Kit Fuel Injector Tester with WH7 5M Wireless Endoscope 1080P HD Zoom 2200mAh WiFi Borescope

...one wire with sturdy, heat insulation and oil resistance for safe use..
【Multiple Working Modes】Electric test pen designs with a switch and 12V/ 5W test light bulb, you can change working modes you want easily. You can choose LED digital display and the bulb work at the same time, or either of them woks, to test voltage and accurately diagnosis faulty battery or fuse circuit. The brightness can be changed with the measured voltage. The voltage(Max 30V)/ The bulb(Max 5W)..
【Replaceable Test Light Bulb & Multiple functions】12V test light has a 5W replaceable test light bulb on the top for high visibility and long life. Bulb can quickly detect the shorts/breaks of the electrical circuit. This Bulb are universal with the car's bulb, so it can be replaced directly. Meanwhile, frequency range can be predicted when led light tester is connected to an AC signal (5~30V), it's used for fuel injector signals, spark plugs, crankshaft sensor signals, etc..
【Bidirectional Voltage Test & LED Digital Display】The light tester comes with bright LED digital voltage display and can read out Volt accurately and quickly, can be clearly seen during the day and night. Connecting a large alligator clip or a second probe to either negative or positive ground, red lig....

Check Stock

Autel PS100 Power Circuit Probe Kit, 12V 24V Automotive Circuit Tester Electrical System Tool, AC DC Diode Resistance Checker Digital Voltage Tester, Multimeter, Short Finder

【ALL-IN-ONE POWER CIRCUIT PROBE TESTER】Autel PowerScan PS100 is goal to reduce circuit diagnostic time in all 6-30v vehicle electrical systems. This automotive power circuit probe supports voltage & polarity test, continuity test, signal circuit test, components activate, check bad ground contact, locate short circuits etc. This is a wonderful Christmas present for man/dad..
【FOUR MODES】The circuit probe kit’s 4 modes : DC voltage: read the DC voltage with a resolution of 0.1 volts. AC voltage: read the Max/Min voltage, frequency, and duty cycle. Resistance: read the resistance between the tip and auxiliary ground lead. Tone On/Off: technicians use the tone in a dark environment to distinguish the test results..
【QUICK SELF-TEST】With the power circuit probe tester connected, perform a quick self-test.The power switch is a momentary rocker switch located on the tool's body. Flanking the switch are positive and negative markings..
【CIRCUIT BREAKER】Autel PS100 electrical tester is short-circuit protected. Its internal circuit breaker will trip if it becomes overloaded. The circuit breaker is a valuab....

Check Stock