ReviewsVoltage Tester For Gfci Outlets

Klein Tools RT250 GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

  • LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results.
  • TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning.
  • DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral.
  • AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets.
  • SAFE AND DURABLE TESTER for inspections on North American 120V outlets.
  • BRIGHT LED LIGHTS illuminate green and red for visual indicators.
  • TRUSTED SAFE with a safety rating of CAT II 135V.
Check Stock

Greenlee - Electrical Kit Gfci Elec Test Instruments TK-30AGFI 10 x 8 x 3

  • Kit includes multimeter DM-25, non contact voltage detector, receptacle tester GT-10GFI and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly with additional ground fault circuit Interrupter (GFCI) testing capability.
Check Stock

Klein Tools 80077 Voltage Tester Kit with Electronic AC/DC Voltage Tester GFCI Outlet Tester and Non-Contact Voltage Tester Pen 3-Piece

  • AC VOLTAGE TESTER aligned with commonly used residential voltages from 12 to 240 VAC at four useful levels.
  • TEST DC VOLTAGES from 1.5V to greater than 17 to 24V at four useful levels.
  • BRIGHT LED LIGHTS illuminate to indicate the type and level of voltage detected.
  • GFCI TESTER detects the most common wiring problems in standard and GFCI receptacles.
  • CONFIRMS OPERATION of the ground fault protective device.
Check Stock

UNI-T AC Circuit Breaker Finder with Integrated GFCI Outlet Tester AC 90-120V USA Plug + Adjustable Sensitivity Beeper Indicattion+ Flashing LED Light

  • ⚡【AC 90-120V Circuit breaker finder】Identifies circuit breakers on energized 120V electrical systems,it Compatible with standard 90 to 120V AC 50/60Hz breaker system..
  • ⚡【Two-part combination】A Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker..
  • ⚡【Three-pin plug Transmitter+GFCI outlet tester】 Connecting to North-American-style grounded electrical outlets.Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices..
  • ⚡【Adjustable Sensitivity】The early you test,Please adjust sensitivity to lowest setting.Or it beeps at nearly every breaker!!!At the lowest setting, the receiver will beep immediately when you approach correct breaker, then you can adjust to higher sensitivity to find correct breaker..
  • ⚡【EVA Tool case】The thickened anti-drop tool box with a drawstring plays an important role in protecting the instrument, making your device last longer and more convenient for you to carry..
  • ⚡【Clearly LED Status indicator】The LED indicator panel on the transmitter can inform the test status and avoid wrong operation..
Check Stock

IDEAL INDUSTRIES INC. 61-025 Volt Aware Non-Contact Voltage Tester, Clear and Compact Voltage Testing, CATIV for 1000v

  • ACCURATE VOLTAGE TESTER: Green LED shows unit is active, flashing red indicates live voltage. The VoltAware NCVtester is useful for identifying hot conductors, finding breaks in wires and detecting the presence of AC voltage at outlets, switches, electrical panels, wires and cables..
  • ULTRA EASY TO USE: Twist the tester body to the On position and verify the green light is on. Verify tester operation on a known voltage source. Next, place the tip of the tester near an AC voltage source to obtain a voltage indication. Voltage presence is indicated by a red, flashing light. If no voltage is detected for a period of 15 minutes, the tester will flash green three times then shut off automatically.* Twist the tester body to the Off position, then back to On to reactivate..
  • SLEEK, COMPACT DESIGN: The sleek, non-contact voltage tester designed by the innovative minds at IDEAL. Its compact design makes it ultra easy to use, even in tight spaces and it is packed with features that will help you on the job..
  • BATTERIES INCLUDED: (2) AAA Batteries included with voltage tester. Quick and easy battery replacement — with the tester in the middle position, simply pull apart the two case halves and replace with 2 AAA (LR03) batteries..
Check Stock

Sperry Instruments PD6902 5-In-1 Multi-Scanner & Electrical Tester, 120V AC, Stud Finder, Metal Scanner, Non-Contact AC Voltage Detection, GFCI Test Functionality, Audio & Visual Indication, 2 Pc. Kit

  • Combined multi-scanner and electrical tester simplifies installation of electrical boxes, switches and outlets.
  • 3-SELECTABLE MODES: stud scan, metal scan, or AC voltage detection. Detects metal pipes or objects to a maximum depth of 2½ - ½ in. drywall.
  • Non-contact AC voltage detection (50-600VAC) to maximum depth of 3.5 -.5 inch drywall. Scans and locates wood or metal studs at a depth up to .75 inch..
  • Durable heavy-duty design with over-molded rubber grips.
  • Integrated 3-wire circuit analyzer with GFCI test functionality. Built-in metal tip for marking stud edge, pipe location or desired mounting point.
Check Stock

DIY220 Quick Connect 220V Power Supply Power 208-240 Volts from Two Separate 110/120V AC Circuits 220V 15A AC Output Outlet GFCI Outlet Circuit Tester Included – ETL Certified Under UL and CSA Std

  • INSTANT 220V POWER SUPPLY - With the quick connect DIY220 by Krieger, users can quickly, easily and safely gain access to a single 220/240 Volt AC....
  • ACCESS TO 220/240 VOLT AC – Plug the DIY220 by KRIEGER voltage converter to two (2) 110/120 Volt AC outlets to power 208-240 Volt equipment....
  • TESTED & CERTIFIED - ETL certified by Intertek Testing Services, an OSHA/CSA recognized laboratory, who tested and certified the DIY220 by Krieger....
  • SMART BUILT-IN SAFETY PROTECTIONS – Designed with built-in safety protections to assure correct polarity and a double pole circuit breaker to....
  • QUICK OPERATION – Test your 110/120V outlets wit GFCI tester included. Connect “Plug A” to 110/120 Volt outlet. Connect “Plug B” to....
Check Stock

Extech CB10-Kit Handy Electrical Troubleshooting Kit with 5 Functions

  • Circuit Breaker Finder with outlet/GFCI tester.
Check Stock

Bastex Socket Tester with GFCI check Receptacle Tester for Standard AC Outlets Includes 7 Visual Indications and Wiring Legend Automatic Electric Circuit Polarity Voltage Detector Breaker Finder

  • GENERAL USAGE: The Bastex socket tester allows electricians, handymen or the DIYer to properly check for correct wiring on US power outlets. The....
  • PRODUCT FEATURES: Made with standard U.S. Sockets in mind. The indicator legend is included on the tester for quick analysis. Includes a clear light....
  • DURABILITY: Hi-Impact Resistant housing. Made of hardened Durable plastic. Has a compact and ergonomic design with texted side design for grip..
  • INCLUDES: Socket Tester with GFCI test function built in.
  • WARRANTY: 30 Day Money Back / 12 Month Replacement Warranty Included.
Check Stock

Gardner Bender GFI-3501 Ground Fault Receptacle Tester & Circuit Analyzer, 110-125V AC, for GFCI / Standard / Extension Cords & More, 7 Visual LED Tests , Red

  • Tests: standard outlets, GFCI outlets, extension cords.
  • Succession of yellow and red lights provide indication of circuit status or specifies wiring errors.
  • Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
Check Stock

Us Tour

  • 2500W CONTINUOUS / 5000W PEAK POWER - With 2500 Watts of Modified Sine Wave power, you'll be able to charge and power your smartphones, laptops, electronics, entertainment devices, power tools, kitchen and bath appliances - safely and reliably..
  • PERFECT FOR ENTERTAINMENT - The CPI2500W gives power supply through four grounded AC outlets for office equipment, entertainment devices, power tools, kitchen and bathroom appliances drawing up to 2500 watts from your car, truck, RV or boat..
  • COBRA REMOTE CONTROLLER COMPATIBLE - Monitor and charge devices with Fast Charge USB from anywhere inside your vehicle. The remote includes 3.0 AMP USB-A and USB-C ports. A 7-color LED indicator displays battery voltage and current consumption..
  • 4 GFCI PROTECTED AC OUTLETS - Power up to 4 of your devices, tools, or large-sized appliances with grounded AC outlets. Also includes heavy-duty direct-to-battery cables (2 Red & 2 Black 48” 2 AWG cables) to run your appliances within easy reach..
  • PENTAGON PROTECTION SAFETY & 2 YEAR WARRANTY - To keep you safe, the PRO 3000W includes 5 levels of protection: Over Temperature, Reverse Polarity, Over Voltage, Low Voltage Alarm, and Low Voltage Cutoff.
  • as well as industry-leading 2-year warranty..
Check Stock