ReviewsVoltage Testers With Backlight

VSDISPLAY 1 lamp CCFL Inverter Board for LCD Screen with 1CCFL Backlight LCD Backlight Inverter Board

  • Input Voltage:12Vdc Output Voltage:650~900Vrms Output Current:2.5~7mA.
  • Packing list : 1× 1 CCFL Backlight Inverter Board.
Check Stock

Auto Meter BVA-350 Intelligent Handheld Battery Tester

  • Tests flooded, deep cycle, and AGM batteries with CCA range of 100-1600 - also detects discharged batteries, bad cells, and has built in reverse....
  • Features Auto Meter's V-Drop Technology – this unique Auto Meter feature utilizes a patented process to automate the measurement of voltage drop in....
  • Unlike competitor models, Auto Meter testers only require a single technician to run a full electrical system test due to our on-board 40 amp True....
  • Automatically stores the last 100 tests in memory..
  • 30" - 16 gauge leads with professional grade clamps that are easily field serviceable..
Check Stock

CLHPT VC1018 Non-Contact Voltage Tester,AC 12V-1000V/48V-1000V Electrical Tester Pen Voltage Detector with LED Flashlight Buzzer Alarm Wire Breakpoint Finder (Yellow)

  • NCV non-contact voltage tester:This electrical tester provides non-contact detection of voltage in wires, circuit breakers, lighting fixtures, switches, receptacles and cables. When voltage is detected, a buzzer will sound an alarm and a red indicator light will flash. The buzzer is staggered fast and slow to determine the current AC voltage strength..
  • Adjustable Sensitivity and Dual Range Voltage Detector:This electric testers comes with 2 sensitivity modes, low sensitivity mode (48-1000V AC) and high sensitivity mode (12-1000V AC). Simply press the "S" button to enter the high sensitivity test mode..
  • Safety level: The safety level of the whole machine conforms to CE CAT.III 1000V CAT.IV 600V, and the body is made of high-quality ABS material, with anti-drop insulation. The electrical tester is safe and double insulated, and the body is equipped with a high-performance sensor chip for accurate detection..
  • Flashlight lighting function: The voltage pen tester with flashlight allows you in the dark environment, no longer afraid of not being able to see the location of the measurement, to eliminate the risk of electric shock..
  • Smart shutdown and low power consumption mode:The automatic power-off function can save and extend the battery life. It will....
Check Stock

AUTENS AC Digital Meter AC 80-260V 100A Current Voltage Power Energy Panel Monitor (AC 100A Meter with Split Core CT)

  • ...t Active Power Energy Frequency and Power factor at the same time. Measuring Voltage range AC 80V-260V.
  • Power Factor range 0-1PF. It will be more convenient to install with a split current transformer..
  • OVERLOAD ALARM FUNCTION: Backlight and power will flash simultaneously to give an alarm if active power value exceeds the preset value. Alarm value can be set by yourself, but applied load should not exceed the rated power. This AC digital meter is suitable for indoor, please do not use outdoor..
  • POWER-OFF DATA STORAGE FUNCTION: The last test data is stored automatically when the power supply abruptly lose. No More worry about data loss due to sudden power outages. This digital meter can only measure the Active Power but not Apparent Power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE, or the meter can be burnt or melted..
  • ONE-BUTTON CONTROL: The button can be used to control the backlight, reset energy and preset power alarm limit. Short press the key to turn on or off the backlight. The backlight has memory function, it can store the on or off state when power off..
  • LCD DIGITAL DISPLAY: Large-screen LCD with all sight 180° vie....
Check Stock

GODIAG GT101 Power Circuit Probe Tester, 4 in 1 Circuit Tester, Fuel Injector Tester and Cleaner, Relay Tester, Current Detection with Overload Protection, Working Voltage Range 6V/12V/24V DC

  • 【4 in 1 Multi-function Power Circuit Probe Tester】This automotive power circuit probe has multiple functions. It supports circuit voltage test & current detection, relay testing, circuit break finding, fuel injector cleaning and testing, etc. Working voltage range 6V-40V, support variety vehicles. This power circuit probe tools includes English instruction manual for your convenience!.
  • 【Excellent Function & Quick Diagnostics】This automotive electrical system test tool is the perfect choice for automotive circuit probe tester. Unlike other circuit testers that require you to use a variety of tools to troubleshoot electrical system problem, our circuit testers are perfectly capable of performing multiple types of services such as continuity testing, component activation, fuse test, checking bad ground indicator, detect voltage and current, positive and negative power supply..
  • 【Positive and negative power supply】When the vehicle's headlights, turn signals, lift windows, sunroofs and other functions fail, our power circuit probe kit can output positive and negative power to check whether circuit components are normal, and can also perform continuity checks and resistance checks. Through these checks and diagnoses whether the path of the car cir....
Check Stock

OTC (3054E) Noid Lite/IAC Test Kit

  • Simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles.
  • Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine.
  • A flashing light indicates normal pulsing voltage.
  • Expanded set of eight specific Noid Lites covers: GM PFI, Ford TBI, Geo TBI, Bosch PFI, GM TBI, GM SCPI, and now new applications of Bosch 2 and Multec 2, plus two GM IAC testers (flat and square four connector applications) with red and green LEDs.
  • Includes a molded plastic case and harness extension that allows for convenient remote viewing from the driver’s seat.
Check Stock

Fluke 117 Digital Multimeter, Non-Contact AC Voltage Detection, Measures Resistance/Continuity/Frequency/Capacitance/Min Max Average, Automatic AC/DC Voltage Selection, Low Impedance Mode

  • VoltAlert technology for non-contact voltage detection.
  • AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV.
  • Low input impedance: helps prevent false readings due to ghost voltage.
  • Large white LED backlight to work in poorly lit areas.
  • True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight.
Check Stock

AstroAI Digital Multimeter, TRMS 6000 Counts Auto-Ranging Voltage Tester Voltmeter Measuring AC/DC Voltage Current, Capacitance Resistance Frequency Temperature Continuity Diodes with NCV

  • ...for electrician test, household use, automotive, industrial electrical problems.
  • LED INTELLIGENT JACK: Switch the dial and the LED lights on and the jacks will shine accordingly. Switch the dial to choose the function you need, the corresponding LED light flashes to tell you which jack you should choose. A large LCD backlight display and flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back..
  • MULTIFUNCTION: Features smart functions, Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging, Backlight and Flashlight. The LCD screen changes to red while detecting live wires, and the backlight turns orange when measuring high voltage..
  • NON-CONTACT Safety: This DMM is designed with safety in mind. It features non-contact voltage testing and Live function with sound and light alarm, works for outlets, sockets, terminals, and more in safety..
  • ADDITIONAL TIPS: The multimeter has passed overvoltage category III 600V and CE safety standards. Anti-Burn with a double ceramic fuse and thermistor protection circuit.
  • The fuses can protect the multimeter effectively.
  • There is overload protection on all range. The silicone protective case effectively prevents the machine from damage..
Check Stock

TOPDON Bundle of BT600 Car Battery Tester, and ArtiDiag Pro Bidirectional Scan Tool OE-Level Diagnostics

  • Item 1: Car Battery Tester, TOPDON BT600 12V Battery Tester, 12V/24V Cranking Tests and Charging Tests, Alternator Load Testers, 100-2000CCA Digital Battery Voltage Tester, 3.5" Screen with Built-in Printer.
  • Item 2: TOPDON ArtiDiag Pro Car Diagnostic Tool, Bi-Directional Control & OE-Level Full Systems Diagnosis for 100+ Vehicles, Smart Scan Tool with AutoVin, 31 Maintenance Services, 2-Year Free Update..
Check Stock

SUPNOVA Battery Monitor12v 24v 36v 48v 60v 72v,Car Golf cart Battery Tester Digital Battery Capacity 7-100V Voltage Monitor Capacity Percentage Tester with Buzzer Alarm and Temperature(Multicolored)

  • APPLICABLE BATTERY --- The digital battery monitor is suitable for 7-100V (12v 24v 36v 48v 60v 72v 84v) Ternary lithium battery, lead-acid,AGM battery, LiFePO4 battery. Default 12 volt lead acid battery ..
  • APPLICATION --- The battery testers can be used for testing battery voltage and capacity for electric motorcycle, motorcycle,golf cart,automotive , car, marine, RV, boat, etc..
  • PROTECTION ---Input reverse connection protection.The battery not waterproof and it only be used for indoor.
  • The product had gotten the CE certification, ,it will not be heated even which is used for a long time(The voltage must be less than 100V).
  • INSTALLATION --- red wire for the positive, black wire for the negative. The wires length are 39.37 inches ..
  • Buzzer Alarm&Temperature--- The battery monitor can set low and high voltage buzzer alarm and short press"M"key can switch voltage and temperature(Celsius)..
Check Stock

USB 3.0 Tester, Eversame IPS Color Display Digital Multimeter Voltmeter Current and Voltage Monitor, DC 5.1A/30V/150W Power Meter Tester, Test Speed of Chargers, Cables, Capacity of Power Banks-Clear

  • USB C Tester, 2 in 1 Type C Type A USB Tester Color Screen IPS Digital Multimeter,Voltage,Current,Power,Resistance,Capacity Detector,with clip cable Support QC2.0 (5V / 9V / 12V / 20V) Qualcomm QC3.0 (3.8 ~ 12V +/- 0.2 step), Android BC1.2 (5V), Apple 5V / 2.4A and MTK-PE (5V / 7V / 9V / 12V).
  • Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance.
  • USB internal data line before and after the through mode, it can also be compatible with U disk readings and computer USB interface data transfer voltage and current measurement applications, the use of a more extensive range of USB interface can be used..
  • Featured with over-voltage protection, over-current protection, low-voltage protection, charging time setting and auto-off function, the meter can detect safely and maximally protect the appliances from damaging..
  • Note: The PD charger needs to be connected to your (mobile phone, tablet computer, portable computer) and other equipment during the test. The usb meter will not be turne....
Check Stock