ReviewsVoltage Testers With High Customer Ratings

KONNWEI KW710 Car Battery Tester 6V 12V 24V, Battery Load Tester Automotive 100-2000CCA Digital Auto Battery Analyzer Alternator Starter Tester for Car Truck Motorcycle Marine ATV SUV

  • ...fine and the charging current is normal status..
  • 【LIFETIME UPDATE SERVICE】digital battery checker tester can easily get upgraded when the new function is released, this is the essential function that top-level car battery tester should equip with! We will keep developing the newer software to ensure accuracy and customer experience at the same time..
Check Stock

Rockville dB16 8000 Watt Peak/2000w RMS Mono 2 Ohm Amplifier Car Audio Amp

  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty..
  • Rockville dB16 8000 Watt Peak/2000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). – 2 Ohm: 2000 Watts x 1 Channel 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V..
  • Frequency Response: 15Hz – 250Hz. Damping Factor: >150 @ 100Hz. 200 Amp Maxi Fuse. Dimensions: (W x H x L) 9″ x 2.4″ x 19.8″. 0 Gauge Power Amplifier Installation Kit.
Check Stock

Rockville Krypton F1 1600w Peak / 400w RMS 4 Channel Amplifier Car Audio Amp

  • Rockville KRYPTON F1 1600w Peak / 400w Dyno-Certified RMS 4 Channel Amplifier Car Audio Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 100 Watts x 4 Channels 003c1% THD+N. 4 Ohm: 70 Watts x 4 Channels 003c1% THD+N..
  • 4 Ohm Bridged: 200 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 400 Watts x 4 Channels. 4 Ohm: 280 Watts x 4 Channels. 4 Ohm Bridged: 800 Watts x 2 Channels..
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry..
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz – 4KHz. Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz. 2CH/4CH Input Mode Switch. 8 Volt Preamp Circuitry.
Check Stock

KONNWEI KW720 Car Battery Tester 6V 12V 24V W/Printer, Battery Load Tester Automotive 100-2000CCA Digital Auto Battery Analyzer Alternator Starter Tester for Car Truck Motorcycle(Paper Included)

  • ...fine and the charging current is normal status..
  • 【LIFETIME UPDATE SERVICE】digital battery checker tester can easily get upgraded when the new function is released, this is the essential function that top-level car battery tester should equip with! We will keep developing the newer software to ensure accuracy and customer experience at the same time..
Check Stock

Klein Tools 80092 Electrical Tester Kit and Inspection Kit with Circuit Breaker Finder, Voltage Tester, and Test Leads, 6-Piece

  • BEST SELLERS in convenient kit include three testers with leads for electrical test and measurement applications.
  • Digital Multimeter, Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester.
  • VARIETY OF FEATURES on the Digital Multimeter MM320 measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance.
  • also tests batteries, diodes, and continuity.
  • DUAL-RANGE TESTING CAPABILITIES allow Voltage Tester NCVT3P to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications.
  • DETECT WIRING CONDITIONS on GFCI Receptacle Tester RT250 which features a large backlit LCD readout of voltage, and clear indication of wiring conditions, with patent pending detection of Open Neutral / Open Ground wiring faults.
  • CIRCUIT BREAKER FINDER quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.
Check Stock

Rockville dB13 3000 Watt Peak/750w CEA rated RMS Mono 2 Ohm Amplifier+Amp Kit

  • Rockville KRYPTON-M2 3000w Peak/750w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford....
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 1 Ohm: 3000 Watts x 1 Channel. 2 Ohm: 2000....
  • Digital Voltage Display on Amp (Accurate within 0.15V). Power/Protect/Clip LED Indicators on the front panel. Power/Protect/Clip LED Indicators on....
Check Stock

Rockville KRYPTON M4 6000w Peak/1500w RMS Mono 1 Ohm Car Amplifier Amp+Remote

  • Rockville Krypton-M4 6000 Watt Peak / 1500w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)..
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 1 Ohm: 6000 Watts x 1 Channel. 2 Ohm: 4000 Watts x 1 Channel. 4 Ohm: 2200 Watts x 1 Channel. Digital Voltage Display on Amp (Accurate within 0.15V)..
  • Power/Protect/Clip LED Indicators on the front panel. Power/Protect/Clip LED Indicators on Remote control. Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time.
Check Stock

Non-Contact Voltage Tester/ Voltage Tester with Dual Range AC 12V-1000V/48V-1000V, Live/Null Wire Tester, ENGiNDOT Electrical Tester with LCD Display & Buzzer Alarm, Wire Breakpoint Finder-VT02(Black)

  • 【DUAL RANGE】The circuit tester accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and other internal wiring detection (depth≤1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate voltage..
  • 【SAFETY FIRST】The live wire detector detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Safety Compliance: CAT.III 1000V CAT.IV 600V.
  • 【MULTIFUNCTION, EASY TO USE】The LED flashlight with high brightness can illuminate your workspace in the dark. In addition, the sound, light, and screen display triple alarms, and the voltmeter buzzer alarms loudly, allowing you to feel the voltage visually and audibly..
  • 【High Efficiency】As long as voltage is detected, the Led in the tester pen will shine..
  • 【COMPACT DESIGN】 The electrical tester uses 2 * 1.5 V AAA batteries (included), which will automatically Power Off in 3 minutes without operation to save energy. What's more, the small-sized body and portable pencil pen hook allow you to carry the item in your pocket..
Check Stock

Klein Tools CL320KIT HVAC Kit for HVAC Testing; Digital Clamp Meter, Non-Contact Voltage Tester, and Infrared/Probe Thermometer

  • HVAC Kit with testers for the HVAC Professiol: HVAC Digital Clamp Meter, Dual IR/Probe Thermometer, and Dual Range Non-Contact Voltage Tester with Flashlight.
  • Cat. No. CL320 HVAC Clamp Meter with TRMS technology measures AC current, NCVT, AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, continuity, and temperature.
  • Cat. No. IR07 Dual IR Probe and Thermometer measures temperature from -40 to 572 Degrees Fahrenheit (-40 to 300 Degrees Celsius).
  • measure surface temperature with Infrared Thermometer (DS ratio 8:1).
  • Measure air vents and duct temperature using temperature probe with hands-free hanging hook.
  • calculate differential temperature (T1-T2) for both IR and probe temperatures.
  • Cat. No. NCVT3P is dual-range and detects from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.
Check Stock

3 Pieces Voltage Meter Tester AC 12-1000V Non Contact Voltage Detector Buzzer Alarm Electrical Testing Led Flashlight Wire Tester Electrical Tool Battery Powered Tester Pen for Live Null Wire Judgment

  • High efficiency: the wire tester electrical tool(Batteries are not included) will send out a variety of alarms through sound and light, when a voltage is detected, the tip will light up and beep, which is easy to judge, saving time and energy.
  • The voltage pen tester uses a non-contact method to detect voltage, so you don't worry about the possibility of electric shock.
  • Sensitivity adjustment: this non contact voltage meter has 3 levels of sensitivity to choose from, the default is to enter the low level (buzzer beeps-once), press the [S] key to enter the middle range (the buzzer beeps twice), and press it again to enter the high level (The buzzer beeps three times), press again to return to the low gear (the buzzer beeps once.
  • Automatic shutdown function: when the ac voltage detector is not operated for about 5 minutes and no voltage signal is detected, the tester will automatically shut down.
  • The volt tester pen can be widely applied in circuit breakers, lighting devices, switches, sockets, wires and anywhere needed.
  • Low voltage indication: when the battery voltage is 2.6 V, the power indicator flashes 3 times, the buzzer will automatically shut down, please replace the battery in time.
  • You will get 3 electric current testers in the package, enoug....
Check Stock

Rockville Krypton-M5 8000 Watt Peak / 2000w RMS Mono 1 Ohm Car Amplifier Amp

  • Rockville Krypton-M5 8000 Watt Peak / 2000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 1 Ohm: 2000 Watts x 1 Channel .
  • 1 Ohm: 8000 Watts x 1 Channel. 2 Ohm: 5200 Watts x 1 Channel. 4 Ohm: 3120 Watts x 1 Channel. Digital Voltage Display on Amp (Accurate within 0.15V). Power/Protect/Clip LED Indicators on the front panel..
  • Power/Protect/Clip LED Indicators on Remote control. Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
Check Stock