ReviewsVortex Scope Rings

kemimoto 2Pcs R-ifle Scope Rings 1 Inch Pica-tinny Aluminum Tactical Sporting Optic Rings Rail Optics Mounting Kit Black Solid Steel Shooting Hunting

  • 【SIZE AND SHAPE DESIGN】:2 Pieces 1 inch Solid scope rings which made with solid steel material,.
  • 【SEMI-SEPARATION DESIGN】：Unlike 6 screws which need to screw with allen wrench which takes a lot of time. Our scope rings with semi-seperation design so that you just need to screw two srews with allen wrench to lock the rings.It will save your time and lock up your scope solidly.
  • 【STAR NUT DESIGN】：The install of tactical scope rings was extremely easy and design with the star nut so you can use hand to screw the rings onto your Pica tinny rail easily.
  • 【COMPLETE ACCESSORIES】:The scope rings comes with extra 4 screws.
  • allen wrench and installation instruction in the package to make installation a breeze.
Check Stock

Orion 7382 Guide Scope Ring Mounting Bar

  • Rigid anodized aluminum bar used for coupling guide scope rings to an astrophotography telescope.
  • Attach guide scope rings to this mounting bar, then attach bar in piggyback orientation to imaging telescope.
  • Multiple holes along length of mounting bar allow rings to be positioned for long-tube or short-tube guide scopes.
  • Pre-drilled holes allow easy attachment to Orion SkyView Pro, Sirius, and Atlas mounted telescopes with tube rings.
  • Astrophotography telescope must be equipped with tube rings in order to attach guide scope ring mounting bar.
Check Stock

Atom Optics 1 inch Riflescope Rings Quick Release Picatinny/Weaver Scope Rings with Quick Detach High/Medium Profile(Medium-1.1 inch)

  • 1 inch quick release scope rings fit 20mm dovetail mounts,rails and bases.
  • scope rings 1 inch fits standard 20mm Weaver / Picatinny rail, aluminium alloy construction with a matte black finish.
  • Scope ring with quick detach/lock lever with full adjustability to fit on any picatinny rail.
  • High profile scope rings(item height:2.12"/54mm),the height from the center of the riflescope tube to the picatinny base is 1.3inches(33mm).
  • Medium profile scope rings(item height:2"/50mm),the height from the center of the riflescope tube to the picatinny base is 1.1inches(28mm).
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Vortex Optics Precision Quick-Release Extended Cantilever 30mm Riflescope Mount - 2-Inch Offset , black

  • This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle..
  • The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle..
  • This mount positions thecenterof the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base..
  • The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish..
  • Weighs 8.9 ounces. Made with pride in the USA.DescriptionVortex Precision QR Cantilever Mount 30mm 2" offset::Set your sights on the best. The Vortex Precision QR Cantilever Mount is a quick-release cantilever mount that's designed for mounting telescopic sights. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement. Take the performance to a new level with Vortex..
Check Stock

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Wheeler Scope Ring Alignment and Lapping Kit, 34mm for Scope Mounting, Accuracy, Gunsmithing

  • FUNCTION: Lapping the inside scope rings will reduce or eliminate any shifting of the scope inside the rings.
  • RELIABLE: Alignment bars provide the perfect alignment of both rings and will also diagnose any vertical or horizontal misalignments.
  • CONVENIENT: Lapping handle attaches to bars for easier use.
  • INCLUDES: 220 grit lapping compound, alignment bar, lapping bar.
Check Stock

Shop Zoombie Brick Building Block 36 Pcs Bracelets Rings Paddleballs and 1 Vortex Eraser Party Supplies and Favors

  • Receive a total of 36 pieces total: 12 Brick Block Paddle Balls, 12 Brick Block Bracelets, 12 Brick Block Rings, and 1 Vortex Eraser (colors or vortex....
  • 12 RINGS: Each silicone ring measure .75 inches. One size fits most..
  • 12 PADDLE BALLS: Each paddle ball measures 9 inches tall and 4.25 inches wide with the block print on 1 side..
  • 12 BRACELETS: Each silicone bracelet measure 7.5 inches. Each silicone ring measure .75 inches. The bracelet and rings come in solid colors (red,....
  • Great for birthdays, piñatas, treasure boxes, stocking stuffers, Easter Baskets, Valentines Gifts, Carnivals, game prizes and infinitely more!.
Check Stock

BARSKA 4X20 Rimfire Riflescope

  • Precision Aiming: The 4x magnification scope features 1/4 MOA click adjustments for precision accuracy..
  • Quality Construction: The scope comes with coated optics, providing impressive viewing clarity. Tube diameter 3/4"..
  • 30/30 Reticle: The scope comes with 30/30 crosshair reticle for easy targeting, ideal for any type of shooting..
  • Parallax Free: The scope is parallax free at 50 yards, making it easy to target at closer range..
  • Accessories: The scope comes with set of 3/8" dovetail rings, lens cover, and lens cloth..
  • Included components: Mounting Rings, Lens Covers and Lens Cloth.
Check Stock

Monstrum Rifle Scope Throw Lever | 46 mm Diameter | Standard

  • Throw Lever built for attachment to variable power rifle scopes allowing for smooth and controlled adjustment of your scope magnification.
  • Available in three sizes - 43 mm, 44 mm, and 46 mm diameter - for compatibility across most scope models and sizes.
  • Available in notched or standard versions for magnification rings of different form factors.. Notched versions have a concave slot inside the lever to accommodate magnification rings with an integrated throw lever. Standard versions have a protruding wedge to secure more tightly to grooved magnification rings..
  • Installs securely around the scope magnification ring. Please refer to the measurement instructions before purchasing to ensure a proper fit..
  • All Monstrum scope accessories come with a lifetime guarantee..
Check Stock